Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Takano, Kazuya; Sakamoto, Yoshihiko; Morohoshi, Kyoichi*; Okazaki, Hitoshi*; Gima, Hiromichi*; Teramae, Takuma*; Ikarimoto, Iwao*; Botte, F.*; Dirat, J.-F.*; Dechelette, F.*
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 8 Pages, 2019/05
ASTRID has the objective to integrate innovative options in order to prepare the 4th generation reactors. In ASTRID, large number of tubes are installed above each fuel subassembly to monitor the core. These instrumentations such as thermocouples (TC) and Failed Fuel Detection and Location (FFDL) systems are integrated into Above Core Structure (ACS) with various sizes tubes. In the present study, the routing study for TC tubes and FFDL tubes was performed with 3D modeling and mock-up experiment of the ACS designed for ASTRID with 1500 MW thermal power in order to clarify the integration process and secure the design hypotheses. Although some problems on fabricability were found in the mock-up experiment, the possible solutions were proposed. The present study gives manufacturing feedback to design team and will contribute to increase the knowledge for ACS design and fabricability.
Sn cable assembled with conduit for ITER central solenoidNabara, Yoshihiro; Suwa, Tomone; Takahashi, Yoshikazu; Hemmi, Tsutomu; Kajitani, Hideki; Ozeki, Hidemasa; Sakurai, Takeru; Iguchi, Masahide; Nunoya, Yoshihiko; Isono, Takaaki; et al.
IEEE Transactions on Applied Superconductivity, 25(3), p.4200305_1 - 4200305_5, 2015/06
Times Cited Count：0 Percentile：0(Engineering, Electrical & Electronic)Nakajima, Hideo; Hemmi, Tsutomu; Iguchi, Masahide; Nabara, Yoshihiro; Matsui, Kunihiro; Chida, Yutaka; Kajitani, Hideki; Takano, Katsutoshi; Isono, Takaaki; Koizumi, Norikiyo; et al.
Proceedings of 24th IAEA Fusion Energy Conference (FEC 2012) (CD-ROM), 8 Pages, 2013/03
The ITER organization and 6 Domestic Agencies (DA) have been implementing the construction of ITER superconducting magnet systems. Four DAs have already started full scale construction of Toroidal Field (TF) coil conductors. The qualification of the radial plate manufacture has been completed, and JA and EU are ready for full scale construction. JA has qualified full manufacturing processes of the winding pack with a 1/3 prototype and made 2 full scale mock-ups of the basic segments of TF coil structure to optimize and industrialize the manufacturing process. Preparation and qualification of the full scale construction of the TF coil winding is underway by EU. Procurement of the manufacturing equipment is near completion and qualification of manufacturing processes has already started. The constructions of other components of the ITER magnet systems are also going well towards the main goal of the first plasma in 2020.
Sn superconducting conductors in ITERNabara, Yoshihiro; Isono, Takaaki; Nunoya, Yoshihiko; Koizumi, Norikiyo; Hamada, Kazuya; Matsui, Kunihiro; Hemmi, Tsutomu; Kawano, Katsumi; Uno, Yasuhiro*; Seki, Shuichi*; et al.
Journal of Plasma and Fusion Research SERIES, Vol.9, p.270 - 275, 2010/08
Nunoya, Yoshihiko; Takahashi, Yoshikazu; Hamada, Kazuya; Isono, Takaaki; Matsui, Kunihiro; Oshikiri, Masayuki; Nabara, Yoshihiro; Hemmi, Tsutomu; Nakajima, Hideo; Kawano, Katsumi; et al.
IEEE Transactions on Applied Superconductivity, 19(3), p.1492 - 1495, 2009/06
Times Cited Count：1 Percentile：12.1(Engineering, Electrical & Electronic)The ITER Poloidal Field Conductor Insert (PFCI) was constructed to characterize the performance of selected cable-in-conduit NbTi conductors for the ITER Poloidal Field (PF) under relevant operating conditions. The PFCI was installed and tested inside the bore of the ITER CS model coil, which provides the background magnetic field. The PFCI is a single-layer solenoid, wound from about 50 m of a full-size ITER cable-in-conduit conductor. The winding diameter and height are about 1.5 m and 1 m, respectively. The nominal design current of the conductor is 45 kA at 6 T and 5 K. The main items in the PFCI test programme are current sharing temperature (Tcs) measurements, critical current (Ic) measurements and AC loss measurement. The key technology of the installation, the test methods and procedures, and some preliminary results of the testing campaigns are described and discussed in this paper.
Okuno, Kiyoshi; Nakajima, Hideo; Sugimoto, Makoto; Isono, Takaaki; Kawano, Katsumi; Koizumi, Norikiyo; Hamada, Kazuya; Nunoya, Yoshihiko; Matsui, Kunihiro; Nabara, Yoshihiro; et al.
Nuclear Fusion, 47(5), p.456 - 462, 2007/05
Times Cited Count：8 Percentile：29.31(Physics, Fluids & Plasmas)no abstracts in English
Hoesch, M.*; Fukuda, Tatsuo; Mizuki, Junichiro; Takenouchi, Tomohiro*; Kawarada, Hiroshi*; Sutter, J. P.*; Tsutsui, Satoshi*; Baron, A. Q. R.*; Nagao, Masanori*; Takano, Yoshihiko*
Physical Review B, 75(14), p.140508_1 - 140508_4, 2007/04
Times Cited Count：35 Percentile：77.49(Materials Science, Multidisciplinary)We observed phonon dispersions using inelastic X-ray scattering from CVD-grown high quality superconducting (
=4.2 K) boron-doped and non-doped diamonds. By comparing these two, we found almost no change in the acoustic branch along both [111] and [001] directions. On the other hand, strong softening were observed in the optical branch of the boron-doped diamond in both directions: about 2 meV at Brillouin zone boundary and 8 meV at zone center (
point). From this result we estimated the electron-phonon coupling factor 
=0.33, and this supports theoretical models suggesting a phonon-mediated pairing mechanism via coupling of optical phonon modes to Fermi surfaces around the point.
Okuno, Kiyoshi; Nakajima, Hideo; Sugimoto, Makoto; Isono, Takaaki; Kawano, Katsumi; Koizumi, Norikiyo; Hamada, Kazuya; Nunoya, Yoshihiko; Nabara, Yoshihiro; Kitamura, Kazunori; et al.
Proceedings of 21st IAEA Fusion Energy Conference (FEC 2006) (CD-ROM), 8 Pages, 2007/03
The ITER superconducting magnet system consists of 18 TF coils, one CS and six Poloidal Field (PF) coils. Among six PTs, Japan, EU and US will be responsible for major part of the superconducting magnets, and Japanese contribution will be the largest, including the following four areas: part of TF conductors, about half (9 out of 19) of TF coil winding packs, most of TF coil structures and part of CS conductor. Since 2004, Japan Atomic Energy Agency (JAEA) started preparation activities for procurement, including manufacturing studies to identify detailed fabrication processes and tools for critical components, such as TF coil winding and case, and manufacturing demonstrations at full scale level on NbSn strands and conductors and cryogenic structural materials, such as coil case segments and radial plates. Details are described in the following sections.
Al conductor developed for JT-60SCKizu, Kaname; Miura, Yushi; Tsuchiya, Katsuhiko; Koizumi, Norikiyo; Matsui, Kunihiro; Ando, Toshinari*; Hamada, Kazuya; Hara, Eiji*; Imahashi, Koichi*; Ishida, Shinichi; et al.
IEEE Transactions on Applied Superconductivity, 14(2), p.1535 - 1538, 2004/06
Times Cited Count：1 Percentile：11.57(Engineering, Electrical & Electronic)no abstracts in English
Arai, K.*; Ninomiya, Akira*; Ishigooka, Takeshi*; Takano, Katsutoshi*; Nakajima, Hideo; Michael, P.*; Vieira, R.*; Martovetsky, N.*; Sborchia, C.*; Alekseev, A.*; et al.
Cryogenics, 44(1), p.15 - 27, 2004/01
Times Cited Count：3 Percentile：15.47(Thermodynamics)no abstracts in English
Al D-shaped coil fabricated by react-and-wind method for JT-60 superconducting TokamakKizu, Kaname; Miura, Yushi; Tsuchiya, Katsuhiko; Koizumi, Norikiyo; Matsui, Kunihiro; Ando, Toshinari*; Hamada, Kazuya; Hara, Eiji*; Imahashi, Koichi*; Ishida, Shinichi; et al.
Proceedings of 6th European Conference on Applied Superconductivity (EUCAS 2003), p.400 - 407, 2003/00
Toroidal field coils (TFC) of the JT-60SC consist of 18 D-shape coils. The maximum magnetic field is 7.4 T at an operational current of 19.4 kA. An advanced NbAl superconductor was developed for the TFC conductor material in JAERI. The NbAl has lower strain sensitivity on superconducting performances, and allows us to fabricate the TFC by react-and-wind (R&W) method that makes that the coil fabrication with high reliability becomes easier and the fabrication cost becomes lower. To demonstrate the coil fabrication by R&W method, a two-turn D-shape coil was developed. The D-shape coil was tested at 4.3-4.4K and 7-12T. Measured critical current (Ic) was 30 kA at 7.3 T and 4.4 K. Using the measured conductor and strand Ic values, the strain of the conductor was estimated to be -0.6%. The Ic-B-T characteristic expected by an empirical equation substituting this strain shows that the required temperature margin for TFC is satisfied. Thus, the R&W method was demonstrated to be the applicable fabrication method of the TFC.
Al conductorKoizumi, Norikiyo; Azuma, Katsunori*; Tsuchiya, Yoshinori; Matsui, Kunihiro; Takahashi, Yoshikazu; Nakajima, Hideo; Nishijima, Gen; Nunoya, Yoshihiko; Ando, Toshinari; Isono, Takaaki; et al.
Fusion Engineering and Design, 58-59, p.1 - 5, 2001/11
Times Cited Count：2 Percentile：19.66(Nuclear Science & Technology)no abstracts in English
Kato, Takashi; Tsuji, Hiroshi; Ando, Toshinari; Takahashi, Yoshikazu; Nakajima, Hideo; Sugimoto, Makoto; Isono, Takaaki; Koizumi, Norikiyo; Kawano, Katsumi; Oshikiri, Masayuki*; et al.
Fusion Engineering and Design, 56-57, p.59 - 70, 2001/10
Times Cited Count：17 Percentile：74.85(Nuclear Science & Technology)no abstracts in English
Tsuji, Hiroshi; Okuno, Kiyoshi*; Thome, R.*; Salpietro, E.*; Egorov, S. A.*; Martovetsky, N.*; Ricci, M.*; Zanino, R.*; Zahn, G.*; Martinez, A.*; et al.
Nuclear Fusion, 41(5), p.645 - 651, 2001/05
Times Cited Count：57 Percentile：83.02(Physics, Fluids & Plasmas)no abstracts in English
S
pulse coilTakahashi, Yoshikazu; Ando, Toshinari; Hiyama, Tadao; Nakajima, Hideo; Kato, Takashi; Sugimoto, Makoto; Isono, Takaaki; Oshikiri, Masayuki*; Kawano, Katsumi; Koizumi, Norikiyo; et al.
Teion Kogaku, 35(7), p.357 - 362, 2000/07
no abstracts in English
Sn conductor joint for ITER model coilsTakahashi, Yoshikazu; Nunoya, Yoshihiko; Nishijima, Gen; Koizumi, Norikiyo; Matsui, Kunihiro; Ando, Toshinari; Hiyama, Tadao; Nakajima, Hideo; Kato, Takashi; Isono, Takaaki; et al.
IEEE Transactions on Applied Superconductivity, 10(1), p.580 - 583, 2000/03
Times Cited Count：20 Percentile：68.9(Engineering, Electrical & Electronic)no abstracts in English
Ando, Toshinari; Hiyama, Tadao; Takahashi, Yoshikazu; Nakajima, Hideo; Kato, Takashi; Sugimoto, Makoto; Isono, Takaaki; Kawano, Katsumi; Koizumi, Norikiyo; Hamada, Kazuya; et al.
IEEE Transactions on Applied Superconductivity, 9(2), p.628 - 631, 1999/06
Times Cited Count：8 Percentile：51.51(Engineering, Electrical & Electronic)no abstracts in English
Sn conductor and central solenoid model coils for ITERTakahashi, Yoshikazu; Ando, Toshinari; Hiyama, Tadao; Nakajima, Hideo; Kato, Takashi; Sugimoto, Makoto; Isono, Takaaki; Oshikiri, Masayuki*; Kawano, Katsumi; Koizumi, Norikiyo; et al.
Fusion Engineering and Design, 41(1-4), p.271 - 275, 1998/09
Times Cited Count：4 Percentile：38.68(Nuclear Science & Technology)no abstracts in English
Nakajima, Hideo; Hiyama, Tadao; Kato, Takashi; Kawano, Katsumi; Isono, Takaaki; Sugimoto, Makoto; Koizumi, Norikiyo; ; Nunoya, Yoshihiko; Matsui, Kunihiro; et al.
Fusion Technology, 30, p.1248 - 1252, 1996/12
no abstracts in English
Al conductorNakajima, Hideo; Nunoya, Yoshihiko; O.Ivano*; Ando, Toshinari; Kawasaki, T.*; Hanawa, Hiromi*; Seki, Shuichi*; Takano, Katsutoshi*; Tsuji, Hiroshi; *; et al.
Advances in Cryogenic Engineering Materials, Vol.42, p.323 - 330, 1996/00
no abstracts in English
