Refine your search:     
Report No.
 - 
Search Results: Records 1-18 displayed on this page of 18
  • 1

Presentation/Publication Type

Initialising ...

Refine

Journal/Book Title

Initialising ...

Meeting title

Initialising ...

First Author

Initialising ...

Keyword

Initialising ...

Language

Initialising ...

Publication Year

Initialising ...

Held year of conference

Initialising ...

Save select records

Journal Articles

Beam commissioning of the linac for iBNCT

Naito, Fujio*; Anami, Shozo*; Ikegami, Kiyoshi*; Uota, Masahiko*; Ouchi, Toshikatsu*; Onishi, Takahiro*; Oba, Toshiyuki*; Obina, Takashi*; Kawamura, Masato*; Kumada, Hiroaki*; et al.

Proceedings of 13th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1244 - 1246, 2016/11

The proton linac installed in the Ibaraki Neutron Medical Research Center is used for production of the intense neutron flux for the Boron Neutron Capture Therapy (BNCT). The linac consists of the 3-MeV RFQ and the 8-MeV DTL. Design average beam current is 10mA. Target is made of Beryllium. First neutron production from the Beryllium target was observed at the end of 2015 with the low intensity beam as a demonstration. After the observation of neutron production, a lot of improvement s was carried out in order to increase the proton beam intensity for the real beam commissioning. The beam commissioning has been started on May 2016. The status of the commissioning is summarized in this report.

Journal Articles

Development of a microcalorimeter with transition edge sensor for detection of LX rays emitted by transuranium elements

Nakamura, Keisuke; Maeda, Makoto*; Yasumune, Takashi*; Maehata, Keisuke*; Ishibashi, Kenji*; Tanaka, Keiichi*; Umeno, Takahiro*; Takasaki, Koji; Momose, Takumaro

Radiation Protection Dosimetry, 146(1-3), p.88 - 91, 2011/07

 Times Cited Count:1 Percentile:10.77(Environmental Sciences)

A Transition Edge Sensor (TES) microcalorimeter has been developed for use as an energy dispersive X-ray spectrometer. A TES microcalorimeter is a thermal detector used to measure the energy of an incident photon with increase in temperature. In this work, a TES microcalorimeter with a 5$$mu$$m Au absorber was developed for use in measuring LX rays emitted from transuranium elements. Furthermore, as a cooling system a dilution refrigerator utilizing a Gifford-McMahon refrigerator was used, which needs no liquid helium. The performance of the TES microcalorimeter was evaluated by measuring the LX rays emitted by an $$^{241}$$Am source. This system proved effective in the measurement of the LX rays because the full width at half maximum of the L$$_{beta1}$$X ray was about 80 eV.

Journal Articles

Development of a TES microcalorimeter for spectroscopic measurement of LX-rays emitted by transuranium elements

Maehata, Keisuke*; Nakamura, Keisuke*; Yasumune, Takashi*; Ishibashi, Kenji*; Takasaki, Koji; Tanaka, Keiichi*; Odawara, Akikazu*; Nagata, Atsushi*

Journal of Nuclear Science and Technology, 47(3), p.308 - 313, 2010/03

 Times Cited Count:5 Percentile:35.8(Nuclear Science & Technology)

A phase transition edge sensor (TES) microcalorimeter was developed for the energy dispersive measurement of LX-ray photons emitted from transuranium elements. The phase transition temperature of the TES was designed to be 200 mK by using bilayer structure of Au of 120 nm thick and Ti of 50 nm thick. The Au layer of 5.0 $$mu$$m thick was deposited on the Au/Ti bilayer for absorption efficiency of 50% and counting rate of 100 counts per second in the detection of LX-ray photons with the energy from 10 to 20 keV. The TES microcalorimeter was operated for the detection of LX-ray photons emitted from $$^{241}$$Am, $$^{238}$$Pu and $$^{239}$$Pu sources. The decay time constant of 180 $$mu$$s of detection signal pulses allowed the TES microcalorimeter operating with the counting rate higher than 100 counts per second. The energy resolution was obtained to be 50 eV of FWHM value for a peak corresponding to $$^{237}$$Np L$$beta$$$$_{1}$$ X-ray of 17.75 keV.

Journal Articles

The DTL/SDTL alignment of the J-PARC linac

Morishita, Takatoshi; Asano, Hiroyuki; Ito, Takashi; Ueno, Akira; Hasegawa, Kazuo; Naito, Fujio*; Takasaki, Eiichi*; Tanaka, Hirokazu*; Yoshino, Kazuo*; Ikegami, Masanori*

Proceedings of 2007 Particle Accelerator Conference (PAC '07) (Internet), p.1523 - 1525, 2007/06

J-PARC linear accelerator components have been installed. The required alignment accuracy in the J-PARC linac is 0.1mm in transverse direction. In the DTL/SDTL section, the fine alignment was carried out by using an optical alignment telescope along with the cavity installation. The displacement of the DTL by the unit tank connection was monitored by a laser tracker to obtain the tolerable displacement between unit tanks. The heights of cavities and magnets were compensated form the unequal ground movement of the linac tunnel. Finally, all the cavities and magnets are aligned within the tolerable alignment error.

Journal Articles

High power conditioning of the DTL for J-PARC

Ito, Takashi; Asano, Hiroyuki; Morishita, Takatoshi; Ao, Hiroyuki; Tanaka, Hirokazu*; Naito, Fujio*; Kato, Takao*; Takasaki, Eiichi*

Proceedings of 2007 Particle Accelerator Conference (PAC '07) (Internet), p.1517 - 1519, 2007/06

The high-power conditioning of the three DTL tanks for the J-PARC has been started in October 2006. The design rf peak-power levels for beam acceleration of the tanks are about 1.1MW (DTL1), 1.2MW (DTL2) and 1.0MW (DTL3), respectively. As a result of the conditioning, we have achieved that the rf power levels are about 1.3MW, 1.45MW and 1.23MW of which are 1.2 times the power levels of the desired one (the pulse length is 650$$mu$$s and the pulse repetition is 25Hz). During the linac beam commissioning, the DTLs can keep the required rf power stable now.

Journal Articles

RF characteristics of the SDTL for the J-PARC

Ito, Takashi; Asano, Hiroyuki; Morishita, Takatoshi; Yamazaki, Yoshishige; Tanaka, Hirokazu*; Naito, Fujio*; Kato, Takao*; Takasaki, Eiichi*

Proceedings of 23rd International Linear Accelerator Conference (LINAC 2006) (CD-ROM), p.740 - 742, 2007/00

For the J-PARC (Japan Proton Accelerator Research Complex) linac, an SDTL (Separated type Drift Tube Linac) is used to accelerate an H$$^{-}$$ ion beam from 50 MeV to 191 MeV. We have measured the RF characteristics of the SDTL tanks and adjusted the field distribution. The measured Q value was above 90% of an ideal SUPERFISH value. Furthermore the field distribution was adjusted within $$pm$$1% for all the tanks.

Journal Articles

Transportation of the DTL/SDTL for the J-PARC

Ito, Takashi; Asano, Hiroyuki; Morishita, Takatoshi; Yamazaki, Yoshishige; Naito, Fujio*; Takasaki, Eiichi*; Yoshino, Kazuo*; Tanaka, Hirokazu*; Kato, Takao*; Kabeya, Zenzaburo*; et al.

Proceedings of 23rd International Linear Accelerator Conference (LINAC 2006) (CD-ROM), p.782 - 784, 2007/00

Three DTL tanks and 32 SDTL tanks for the Japan Proton Accelerator Research Complex (J-PARC) were assembled at KEK site. After the assembling, the high-power conditioning of the DTL1 and 12 SDTL tanks and the beam acceleration test for the DTL1 ware carried out. And then all the DTL and SDTL tanks have to be transported form KEK to JAEA. In order to confirm the effect of the transportation to the drift tube alignment, we measured the displacement of the drift tube positions before and after the transportation by using a prototype cavity. As a result of the test, the measured displacement of the drift tubes by the transportation was less than 0.02mm which is consistent in the measurement accuracy. Based on this result, all the DTL and SDTL tanks were transported form KEK to JAEA.

Journal Articles

DTL/SDTL installation and alignment of J-PARC LINAC

Morishita, Takatoshi; Asano, Hiroyuki; Ito, Takashi; Ikegami, Masanori*; Takasaki, Eiichi*; Tanaka, Hirokazu*; Naito, Fujio*; Yoshino, Kazuo*

Proceedings of 3rd Annual Meeting of Particle Accelerator Society of Japan and 31st Linear Accelerator Meeting in Japan (CD-ROM), p.376 - 378, 2006/00

In the J-PARC Linac, the DTL and the SDTL have been installed. A precise alignment of accelerator components is essential for high quality beam acceleration. Due to the heavy wiring for DTQs, the realignment of DTL cavity requires a long term. Then the DTL/SDTL and the focusing magnets are aligned precisely enough for the beam operation at the installation. The DTL/SDTL alignment accuracy satisfied the requirement, which confirmed by the laser tracker measurement. The floor level of the accelerator tunnel has been measured periodically. The long term motion of accelerator tunnel is quantitatively evaluated since Feb. 2005.

Journal Articles

An Alignment of J-PARC linac

Morishita, Takatoshi; Ao, Hiroyuki; Ito, Takashi; Ueno, Akira; Hasegawa, Kazuo; Ikegami, Masanori*; Kubota, Chikashi*; Takasaki, Eiichi*; Tanaka, Hirokazu*; Naito, Fujio*; et al.

Proceedings of 2nd Annual Meeting of Particle Accelerator Society of Japan and 30th Linear Accelerator Meeting in Japan, p.266 - 268, 2005/07

J-PARC linear accelerator components are now being installed in the accelerator tunnel. Markings are placed on the floor, which act as a reference for the initial alignment at the installation. A planned and ongoing alignment schemes for the installation of linac components and watching the long term motion of the building are described.

Journal Articles

RF characteristics of J-PARC DTL3 cavity

Ito, Takashi; Asano, Hiroyuki*; Morishita, Takatoshi; Kato, Takao*; Takasaki, Eiichi*; Tanaka, Hirokazu*; Yoshino, Kazuo*; Naito, Fujio*

Proceedings of 2nd Annual Meeting of Particle Accelerator Society of Japan and 30th Linear Accelerator Meeting in Japan, p.242 - 244, 2005/07

The third Drift Tube Linac (DTL3) is adopted for 37MeV-50MeV part of high intensity proton linac for Japan Proton Accelerator Research Complex(J-PARC). DTL3 consists of 26 full drift tubes, 2 half drift tubes and 26 post-couplers. As a result of tuning of the accelerating field of the DTL3, the resonant frequency was adjusted to 324MHz and the average accelerating field distribution was adjusted within 1%.

Journal Articles

An Alignment of J-PARC linac

Morishita, Takatoshi; Ao, Hiroyuki; Ito, Takashi; Ueno, Akira; Hasegawa, Kazuo; Ikegami, Masanori*; Kubota, Chikashi*; Naito, Fujio*; Takasaki, Eiichi*; Tanaka, Hirokazu*; et al.

Proceedings of 2005 Particle Accelerator Conference (PAC '05) (CD-ROM), p.2851 - 2853, 2005/00

In J-PARC linac, a precise alignment of accelerator components is essential for high quality beam acceleration. Markings have been placed on the floor, which act as a reference for the initial alignment at the installation. For a straight line alignment, the wire position sensor is placed on the offset position with respect to the beam center by a target holder. The hydrostatic levering system is used for watching the floor elevation over the long period.

Journal Articles

An Alignment system of J-PARC linac

Morishita, Takatoshi; Ao, Hiroyuki; Ito, Takashi; Ueno, Akira; Hasegawa, Kazuo; Ikegami, Masanori*; Kubota, Chikashi*; Takasaki, Eiichi*; Tanaka, Hirokazu*; Naito, Fujio*; et al.

Proceedings of 1st Annual Meeting of Particle Accelerator Society of Japan and 29th Linear Accelerator Meeting in Japan, p.671 - 673, 2004/08

A precise alignment of accelerator components is essential for the J-PARC linear accelerator. The wire position sensor is applied to measure the accelerator component positioning and the ground motion of the building is measured by the hydrostatic leveling sensors. In this paper, the scheme of the alignment system is presented.

Journal Articles

Beam commissioning of the J-PARC linac DTL1 at KEK

Kondo, Yasuhiro; Akikawa, Hisashi; Anami, Shozo*; Asano, Hiroyuki*; Fukui, Yuji*; Igarashi, Zenei*; Ikegami, Kiyoshi*; Ikegami, Masanori*; Ito, Takashi; Kawamura, Masato*; et al.

Proceedings of 1st Annual Meeting of Particle Accelerator Society of Japan and 29th Linear Accelerator Meeting in Japan, p.156 - 158, 2004/08

A commissioning of the J-PARC linac DTL1 is now under way at KEK. A 30mA H$$^{-}$$ beam was accelerated to 19.7-MeV, and 100% transmission was obtained with a 20-msec-pulse-width and 12.5-Hz-repetition beam. In this paper, present status of the DTL1 commissioning and preliminary results of the commissioning, such as emittance measurements, are presented.

Journal Articles

RF measurement of SDTL cavity

Ito, Takashi; Asano, Hiroyuki*; Morishita, Takatoshi; Kato, Takao*; Takasaki, Eiichi*; Tanaka, Hirokazu*; Naito, Fujio*

Proceedings of 1st Annual Meeting of Particle Accelerator Society of Japan and 29th Linear Accelerator Meeting in Japan, p.344 - 346, 2004/08

no abstracts in English

Journal Articles

The Harmonic current control for DTQ power supplies to high intensity proton Linac

Hori, Toshihiko*; Ito, Takashi; Chishiro, Etsuji; Izumi, Keisuke*; Yamazaki, Masayoshi*; Watanabe, Kazuhiko*; Takasaki, Eiichi*; Hasegawa, Kazuo; Yoshikawa, Hiroshi

Proceedings of 27th Linear Accelerator Meeting in Japan, p.255 - 257, 2002/08

no abstracts in English

Oral presentation

Spectroscopic measurement of LX-rays emitted by transuranium elements using TES microcalorimeter

Maeda, Makoto*; Maehata, Keisuke*; Iyomoto, Naoko*; Ishibashi, Kenji*; Takasaki, Koji; Nakamura, Keisuke; Aoki, Katsunori; Mitsuda, Kazuhisa*; Tanaka, Keiichi*

no journal, , 

no abstracts in English

Oral presentation

The Spectroscopy of LX-rays emitted from transuranium element using transition edge sensor microcalorimeter

Nakamura, Keisuke; Maeda, Makoto*; Aoki, Katsunori; Yasumune, Takashi; Takasaki, Koji; Maehata, Keisuke*; Iyomoto, Naoko*; Ishibashi, Kenji*; Mitsuda, Kazuhisa*; Tanaka, Keiichi*

no journal, , 

no abstracts in English

Oral presentation

Study of high resolution spectroscopy of LX-rays emitted from TRU using TES microcalorimeter

Nakamura, Keisuke; Aoki, Katsunori; Takasaki, Koji; Maeda, Makoto*; Maehata, Keisuke*; Iyomoto, Naoko*; Ishibashi, Kenji*; Mitsuda, Kazuhisa*; Tanaka, Keiichi*

no journal, , 

no abstracts in English

18 (Records 1-18 displayed on this page)
  • 1