Production and installation of equipments for radiation-induced graft polymerization in liquid phase and dipping techniques

Seko, Noriaki; Takeda, Hayato*; Kasai, Noboru; Tamada, Masao; Hasegawa, Shin; Katakai, Akio; Sugo, Takanobu*

JAERI-Tech 2004-075, 51 Pages, 2005/01

JAERI-Tech-2004-075.pdf:8.0MB

Fibrous adsorbent which is synthesized by radiation induced graft polymerization on the trunk polymers such as polymer nonwoven fabrics and woven cloths exhibits an excellent selective adsorption against heavy metal ions and toxic gases at extremely low concentrations. Two equipments were installed to synthesize the metal-ion and gas adsorbents by means of the radiation-induced graft polymerization in the liquid phase and the dipping, respectively. In the reaction chamber of the liquid phase reactor, the oxygen decreased to 100ppm. The inside temperature raised to 80C. These characteristics satisfied the specification. The fabric transport can regulate the rate in the range from 1 to 10m/min. The reactor for the dip grafting could reduce the inside oxygen to 100ppm and inside temperature could reach to 80 C. The grafting of GMA was carried out as a characteristic test. The degree of grafting was controlled in the range from 40 to 70%.

Characteristics tests for recovery of rare metals from real sea with adsorbents

Katakai, Akio; Kasai, Noboru; Tamada, Masao; Hasegawa, Shin; Seko, Noriaki; Kawabata, Yukiya*; Onuma, Kenji*; Takeda, Hayato*; Sugo, Takanobu

JAERI-Tech 2002-040, 79 Pages, 2002/03

JAERI-Tech-2002-040.pdf:8.62MB

The present report dealt with experimental methods of adsorbents synthesis, recovery, elution, analysis in experimental equipment for recovery of rare metals from seawater to evaluate performance of the adsorbent synthesized by radiation-induced graft-polymerization. In the adsorbent synthesis, monomers of acrylonitrile and methacryl acid were continuously co-grafted into polymer nonwoven fabric irradiated with electron beam. The grafted nonwoven fabric was amidoximated and treated with alkaline solution in batch processing. The obtained adsorbent fabrics which were cut into 116 sheets of the square, 160 mm 290 mm, were alternatively stacked with spacers to make an adsorbent cassette. In recovery process, a large-sized cage packing 144 pieces of the adsorbent cassette was dipped into sea in the depth of 20 m by using an experimental marine equipment. In the case of a small-sized cage, there are 36 adsorbent cassettes in it. In elution step, first, marine animals which were adhered on the adsorbent cassette were washed out immediately after the adsorbent cassettes were recovered from sea. From every 72 adsorbent cassettes packed into elution unit, second, alkaline and rare metals were fractionally eluted by changing acid concentration in fractional elution equipment. The eluted metals were adsorbed onto a commercial chelate resin to transport them to purificatory factory. Concentrations of metals in eluent and waste solution were analyzed with inducticely coupled plasma atomic emission and mass spectrometry (ICP-AES and ICP-MS). The rare metal distribution in the adsorbent was evaluated by using the same analytical methods.

Transportation of significant metals recovered in real sea experiment of adsorbents

Takeda, Hayato*; Onuma, Kenji*; Tamada, Masao; Kasai, Noboru; Katakai, Akio; Hasegawa, Shin; Seko, Noriaki; Kawabata, Yukiya*; Sugo, Takanobu

JAERI-Tech 2001-062, 66 Pages, 2001/10

JAERI-Tech-2001-062.pdf:5.5MB

Real sea experiment for the recovery of significant metals such as uranium and vanadium has been carried out at the offing of Mutsu establishment to evaluate the adsorption performance of adsorbent synthesized by radiation-induced graft-polymerization. After elution of uranium and vanadium from the adsorbent, their metals were adsorbed onto the conventional chelate resin. This chelate resin in a plastic column was further put in a cylindrical stainless transport container. The container was transported to the facility for separation and purification by a truck for the exclusive loading. The maximum concentration is 60 Bq/g when the uranium is adsorbed on the chelate resin. Transportation of recovered metals can be treated as general substance since these amount and concentration are out of legal control. However, the recovered metals were transported in conformity to L type transportation as a voluntary regulation. The strength analysis of the container was equal to the safety level of IP-2 type which is higher transportation grade than L type .

Mechanism of soil-to-plant transfer of Cs and K using element-substituted biotite

Uno, Koichiro*; Nakao, Atsushi*; Okumura, Masahiko; Kogure, Toshihiro*; Yamaguchi, Akiko; Takeda, Hikaru*; Maruyama, Hayato*; Shinano, Takuro*; Yanai, Junta*

no journal, , 

Biotite inhibits radiocesium (RCs) transfer from soil to plants by two functions of selective adsorption of radiocesium (Cs) between layers (Cs adsorption ability) and K supply from between layers (K supply ability). However, it was difficult to distinguish between the two. In this study, the authors succeeded in preparing biotite in which both functions are variously different by preparing weathered biotite in which interlayer pottasium (K) was replaced with rubidium (Rb) to lose K supply ability. By systematically comparing these biotites, the authors clarified the effects of Cs adsorption ability and K supply ability on Cs transfer to plants.