Demonstration of a kicker impedance reduction scheme with diode stack and resistors by operating the 3-GeV rapid cycling synchrotron of the Japan Proton Accelerator Research Complex

Shobuda, Yoshihiro; Harada, Hiroyuki; Saha, P. K.; Takayanagi, Tomohiro; Tamura, Fumihiko; Togashi, Tomohito; Watanabe, Yasuhiro; Yamamoto, Kazami; Yamamoto, Masanobu

Physical Review Accelerators and Beams (Internet), 26(5), p.053501_1 - 053501_45, 2023/05

https://doi.org/10.1103/PhysRevAccelBeams.26.053501

At the Rapid Cycling Synchrotron (RCS) in Japan Proton Accelerator Research Complex (J-PARC), theoretical predictions have indicated that the kicker-impedance would excite the beam-instability. A 1 MW beam with large emittance can be delivered to the Material and Life Science Experimental Facility (MLF) through suppression of the beam instabilities by choosing the appropriate machine parameters. However, we require other high-intensity and high-quality smaller emittance beams (than the 1 MW beam) for the Main Ring (MR). Hence, we proposed a scheme for suppressing the kicker-impedance by using prototype diodes and resistors, thereby demonstrating the effect on the kicker impedance reduction. However, the J-PARC RCS must be operated with a repetition rate of 25 Hz, which urged us to consider special diodes that are tolerant to heating. After developments, we have demonstrated that the special diodes with resistors can suppress the beam instability by reducing the kicker impedance. Enhanced durability of the prototype diodes and resistors for the 25 Hz operation was also realized. Moreover, the new diodes and the resistors have negligible effect on the extracted beam from the RCS. From a simulation point of view, the scheme can be employed for at least 5 MW beam operation within the stipulated specifications.

Design and actual performance of J-PARC 3 GeV rapid cycling synchrotron for high-intensity operation

Yamamoto, Kazami; Kinsho, Michikazu; Hayashi, Naoki; Saha, P. K.; Tamura, Fumihiko; Yamamoto, Masanobu; Tani, Norio; Takayanagi, Tomohiro; Kamiya, Junichiro; Shobuda, Yoshihiro; et al.

Journal of Nuclear Science and Technology, 59(9), p.1174 - 1205, 2022/09

https://doi.org/10.1080/00223131.2022.2038301

In the Japan Proton Accelerator Research Complex, the purpose of the 3 GeV rapid cycling synchrotron (RCS) is to accelerate a 1 MW, high-intensity proton beam. To achieve beam operation at a repetition rate of 25 Hz at high intensities, the RCS was elaborately designed. After starting the RCS operation, we carefully verified the validity of its design and made certain improvements to establish a reliable operation at higher power as possible. Consequently, we demonstrated beam operation at a high power, namely, 1 MW. We then summarized the design, actual performance, and improvements of the RCS to achieve a 1 MW beam.

Impact of post-nitridation annealing in CO ambient on threshold voltage stability in 4H-SiC metal-oxide-semiconductor field-effect transistors

Hosoi, Takuji*; Osako, Momoe*; Moges, K.*; Ito, Koji*; Kimoto, Tsunenobu*; Sometani, Mitsuru*; Okamoto, Mitsuo*; Yoshigoe, Akitaka; Shimura, Takayoshi*; Watanabe, Heiji*

Applied Physics Express, 15(6), p.061003_1 - 061003_5, 2022/06

https://doi.org/10.35848/1882-0786/ac6f42

The combination of NO annealing and subsequent post-nitridation annealing (PNA) in CO ambient for SiO/SiC structures has been demonstrated to be effective in obtaining both high channel mobility and superior threshold voltage stability in SiC-based metal-oxide-semiconductor field-effect transistors (MOSFETs). N atoms on the SiO side of the SiO/SiC interface incorporated by NO annealing, which are plausible cause of charge trapping sites, could be selectively removed by CO-PNA at 1300C without oxidizing the SiC. CO-PNA was also effective in compensating oxygen vacancies in SiO, resulting high immunity against both positive and negative bias-temperature stresses.

Dynamical response of transition-edge sensor microcalorimeters to a pulsed charged-particle beam

Okumura, Takuma*; Azuma, Toshiyuki*; Bennet, D. A.*; Caradonna, P.*; Chiu, I.-H.*; Doriese, W. B.*; Durkin, M. S.*; Fowler, J. W.*; Gard, J. D.*; Hashimoto, Tadashi; et al.

IEEE Transactions on Applied Superconductivity, 31(5), p.2101704_1 - 2101704_4, 2021/08

https://doi.org/10.1109/TASC.2021.3067793

A superconducting transition-edge sensor (TES) microcalorimeter is an ideal X-ray detector for experiments at accelerator facilities because of good energy resolution and high efficiency. To study the performance of the TES detector with a high-intensity pulsed charged-particle beam, we measured X-ray spectra with a pulsed muon beam at the Japan Proton Accelerator Research Complex (J-PARC) in Japan. We found substantial temporal shifts of the X-ray energy correlated with the arrival time of the pulsed muon beam, which was reasonably explained by pulse pileup due to the incidence of energetic particles from the initial pulsed beam.

Effect of coolant water temperature of emergency core cooling system on failure probability of reactor pressure vessel

Lu, K.; Katsuyama, Jinya; Masaki, Koichi; Watanabe, Tadashi*; Li, Y.

Journal of Pressure Vessel Technology, 143(3), p.031704_1 - 031704_8, 2021/06

https://doi.org/10.1115/1.4049048

Effect of coolant water temperature of ECCS on failure probability of RPV

Katsuyama, Jinya; Masaki, Koichi; Lu, K.; Watanabe, Tadashi*; Li, Y.

Proceedings of 2019 ASME Pressure Vessels and Piping Conference (PVP 2019) (Internet), 7 Pages, 2019/07

For reactor pressure vessel (RPV) of pressurized water reactor, temperature of coolant water in emergency core cooling system (ECCS) may have influence on the structural integrity of RPV during pressurized thermal shock (PTS) events. Focusing on a mitigation measure to raise the coolant water temperature of ECCS for aged RPVs in order to reduce the effect of thermal shock due to PTS events, we performed thermal hydraulic analyses and probabilistic fracture mechanics analyses by using RELAP5 and PASCAL4, respectively. From the analysis results, it was shown that the failure probability of RPV was dramatically reduced when the coolant temperature in accumulator as well as high and low pressure injection systems (HPI/LPI) was raised, although raising the coolant temperature of HPI/LPI only did not cause reduction in the failure probability.

New isomers in Pd and Pd; Competing proton and neutron excitations in neutron-rich palladium nuclides towards the shell closure

Watanabe, Hiroshi*; Wang, H. K.*; Lorusso, G.*; Nishimura, Shunji*; Xu, Z. Y.*; Sumikama, Toshiyuki*; Orlandi, R.; 47 of others*

Physics Letters B, 792, p.263 - 268, 2019/05

https://doi.org/10.1016/j.physletb.2019.03.053

Simulation, measurement, and mitigation of beam instability caused by the kicker impedance in the 3-GeV rapid cycling synchrotron at the Japan Proton Accelerator Research Complex

Saha, P. K.; Shobuda, Yoshihiro; Hotchi, Hideaki; Harada, Hiroyuki; Hayashi, Naoki; Kinsho, Michikazu; Tamura, Fumihiko; Tani, Norio; Yamamoto, Masanobu; Watanabe, Yasuhiro; et al.

Physical Review Accelerators and Beams (Internet), 21(2), p.024203_1 - 024203_20, 2018/02

AA2017-0659.pdf:3.34MB

https://doi.org/10.1103/PhysRevAccelBeams.21.024203

Recent progress of J-PARC RCS beam commissioning; Efforts for realizing a high-intensity low-emittance beam

Hotchi, Hideaki; Harada, Hiroyuki; Kato, Shinichi; Okabe, Kota; Saha, P. K.; Shobuda, Yoshihiro; Tamura, Fumihiko; Tani, Norio; Watanabe, Yasuhiro; Yoshimoto, Masahiro

Proceedings of 14th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.95 - 99, 2017/12

http://www.pasj.jp/web_publish/pasj2017/proceedings/PDF/WEOL/WEOL04.pdf

no abstracts in English

Achievement of a low-loss 1-MW beam operation in the 3-GeV rapid cycling synchrotron of the Japan Proton Accelerator Research Complex

Hotchi, Hideaki; Harada, Hiroyuki; Hayashi, Naoki; Kato, Shinichi; Kinsho, Michikazu; Okabe, Kota; Saha, P. K.; Shobuda, Yoshihiro; Tamura, Fumihiko; Tani, Norio; et al.

Physical Review Accelerators and Beams (Internet), 20(6), p.060402_1 - 060402_25, 2017/06

AA2017-0154.pdf:4.88MB

https://doi.org/10.1103/PhysRevAccelBeams.20.060402

The 3-GeV rapid cycling synchrotron (RCS) of the Japan Proton Accelerator Research Complex (J-PARC) is the world's highest class of high-power pulsed proton driver, aiming for an output beam power of 1 MW. The most important issues in realizing such a high-power beam operation are to control and minimize beam loss for maintaining machine activations within permissible levels. In RCS, numerical simulation was successfully utilized along with experimental approaches to isolate the mechanism of beam loss and find its solution. By iteratively performing actual beam experiments and numerical simulations, and also by several hardware improvements, we have recently established a 1-MW beam operation with very low fractional beam loss of a couple of 10. In this paper, our recent efforts toward realizing such a low-loss high-intensity beam acceleration are presented.