Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Suwa, Masayuki; Isaka, Koji; Ouchi, Satoshi; Goto, Shingo; Ikekame, Yoshinori; Terakado, Yoshibumi
JAEA-Technology 2011-041, 35 Pages, 2012/03
JRR-3 process control computer system is used to monitor and control various process parameters such as flow rates, temperatures, pressures and so on, and operate many reactor components such as cooling pumps and valves. The system has been under aging degradation at this time and the renewal of the system has become indispensable. The renewal work has planned, paying a due consideration to minimizing renewal costs and duration, to be separated in three stages. This paper describes the renewal plan and renewal works of main part of the system.
Ouchi, Satoshi; Suwa, Masayuki; Isaka, Koji; Ikekame, Yoshinori; Terakado, Yoshibumi
JAEA-Testing 2011-006, 43 Pages, 2012/02
JRR-3 has been utilized for various researches such as neutron irradiation experiment, neutron beam experiment and so on as a high performance research reactor with thermal power of 20 MW since the first criticality in March, 1990. Process data needed for JRR-3 operation such as temperatures, pressures, and flow rates, etc. had been processed by JRR-3 process computer system which consisted of several computer systems and several application softwares. The system needed complicated data administration and conservation. Also there was a problem in the administration of recording data. Data discrepancy among computers used in the system was taken place since the system was not so designed as to synchronize the process timing among the computers. Therefore, we developed a program to synchronize among all of the computers. This paper reports the development of data processing computer system.
Ichimura, Toshiyuki; Suwa, Masayuki; Fukushima, Manabu; Oba, Toshinobu; Nemoto, Yoshinori; Terakado, Yoshibumi
Proceedings of 12th International Group on Research Reactors (12th IGORR) (USB Flash Drive), 8 Pages, 2009/10
Kurihara, Osamu; Takasaki, Koji; Momose, Takumaro; Terakado, Yoshinori*; Takahashi, Koji*
Journal of Nuclear Science and Technology, 41(Suppl.4), p.243 - 246, 2004/03
None
Kurihara, Osamu; Takasaki, Koji; Momose, Takumaro; Terakado, Yoshinori*; Takahashi, Koji*
IRPA-11, 0 Pages, 2004/00
As an alternative to the phantom used for calibrating whole-body counters, in this study the Monte Carlo simulation was used to evaluate peak efficiencies for a whole-body counter installed at the JNC, to examine the validity of using the simulation technique to calibrate the whole-body counter. Prior to simulating a phantom, the sensitive region of the crystal in the Ge detectors which are used with the whole-body counter, was evaluated by assuming dead layers in the simulation. The phantom was then simulated based on the determined configuration of the sensitive region. As a result, the calculated peak efficiencies were fairly consistent with the measured ones. For an entire body scanning measurement, the discrepancy between the measurement and the simulation was within 4% for peak energies ranging from 81.0 keV to 1460.8 keV. The simulation technique is therefore both effective and practical for situations that are difficult to be simulated by a phantom.
Kato, Takashi; Tsuji, Hiroshi; Ando, Toshinari; Takahashi, Yoshikazu; Nakajima, Hideo; Sugimoto, Makoto; Isono, Takaaki; Koizumi, Norikiyo; Kawano, Katsumi; Oshikiri, Masayuki*; et al.
Fusion Engineering and Design, 56-57, p.59 - 70, 2001/10
Times Cited Count:17 Percentile:74.85(Nuclear Science & Technology)no abstracts in English
Tsuji, Hiroshi; Okuno, Kiyoshi*; Thome, R.*; Salpietro, E.*; Egorov, S. A.*; Martovetsky, N.*; Ricci, M.*; Zanino, R.*; Zahn, G.*; Martinez, A.*; et al.
Nuclear Fusion, 41(5), p.645 - 651, 2001/05
Times Cited Count:57 Percentile:83.02(Physics, Fluids & Plasmas)no abstracts in English
Ikeda, Yoshitaka; Fujita, Takaaki; Hamamatsu, Kiyotaka; Ide, Shunsuke; Imai, Tsuyoshi; Isayama, Akihiko; Iwase, Makoto; Kasugai, Atsushi; Kondoh, Takashi; Kusama, Yoshinori; et al.
AIP Conference Proceedings 485, p.279 - 287, 1999/09
no abstracts in English
Ando, Toshinari; Hiyama, Tadao; Takahashi, Yoshikazu; Nakajima, Hideo; Kato, Takashi; Sugimoto, Makoto; Isono, Takaaki; Kawano, Katsumi; Koizumi, Norikiyo; Hamada, Kazuya; et al.
IEEE Transactions on Applied Superconductivity, 9(2), p.628 - 631, 1999/06
Times Cited Count:8 Percentile:51.51(Engineering, Electrical & Electronic)no abstracts in English
Fujii, Tsuneyuki; Saigusa, Mikio; Kimura, Haruyuki; *; Tobita, Kenji; Nemoto, Masahiro; Kusama, Yoshinori; Seki, Masami; Moriyama, Shinichi; Nishitani, Takeo; et al.
Fusion Engineering and Design, 12, p.139 - 148, 1990/00
Times Cited Count:25 Percentile:89.09(Nuclear Science & Technology)no abstracts in English
Kimura, Haruyuki; Fujii, Tsuneyuki; Saigusa, Mikio; Hamamatsu, Kiyotaka; Kusama, Yoshinori; Tobita, Kenji; Nemoto, Masahiro; Nagashima, Keisuke; *; Moriyama, Shinichi; et al.
JAERI-M 88-123, 24 Pages, 1988/07
no abstracts in English
Kanai, Katsuta; Kurihara, Osamu; Terakado, Yoshinori*; Takada, Chie; Ito, Kimio; Momose, Takumaro
no journal, ,
In JAEA Nuclear Fuel Cycle Engineering Laboratory(JAEA-NFCEL), MOX fuel fabrication facilities and spent fuel reprocessig facilities are operated during over several ten years for the purpose of establishing the nuclear fuel cycle technology. In these facilities, we have to need to pay attention to plutonium. We present the internal monitoring technique for plutonium in JAEA-NFCEL.
Takada, Chie; Nakagawa, Takahiro; Tsujimura, Norio; Terakado, Yoshinori*
no journal, ,
no abstracts in English
Terakado, Yoshinori; Kaneyama, Kazunori; Zushi, Masafumi; Uezu, Yasuhiro; Kinouchi, Nobuyuki
no journal, ,
no abstracts in English