Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Takayanagi, Tomohiro; Ueno, Tomoaki*; Horino, Koki; Tobita, Norimitsu; Hayashi, Naoki; Kinsho, Michikazu; Irie, Yoshiro*; Okabe, Kota; Tani, Norio; Naito, Shingo*; et al.
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1169 - 1174, 2015/09
The new injection bump power supply for the shift bump magnet of the beam injection sub-systems at the J-PARC (Japan Proton Accelerator Research Complex) 3-GeV RCS (Rapid Cycling Synchrotron) has been developed and manufactured. The power capacity of the new power supply was more than doubled with the injection beam energy upgrading of the LINAC (Linear Accelerator) from 181 MeV to 400 MeV. Furthermore, the low ripple noise on the output current was required to prevent the resonance of the RF shield loop at the ceramic duct with the excitation magnetic field. The power supply newly adopted a capacitor commutation method to form the trapezoid waveform pattern (bump waveform). This paper reports characteristic about the new power supply.
Takayanagi, Tomohiro; Hayashi, Naoki; Ueno, Tomoaki; Togashi, Tomohito; Tani, Norio; Kinsho, Michikazu; Toda, Katsunori*
Proceedings of 3rd International Particle Accelerator Conference (IPAC '12) (Internet), p.3626 - 3628, 2012/05
With the energy upgrading of LINAC to 400 MeV in the J-PARC, a new power supply of the injection bump magnet has been designed for the 3-GeV RCS. The new power supply of the shift bump magnet is composed with the capacitor bank which has function to form the output current pattern. This power supply is a commutation strategy using the electrical charge and discharge of the capacitor, and the frequency of the switch that becomes the source of the noise is a little. Comparing to the conventional switching-type power supply, this power supply is switched only three times for the pattern formation. Thus, the ripple due to the switching can be expected to be much lower. The 1/16 scale model was manufactured and the characteristics was evaluated. This paper summarizes the design parameter and the experimental result of the new power supply.