検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 2 件中 1件目~2件目を表示
  • 1

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Work hardening behavior of dual phase copper-iron alloy at low temperature

山下 享介*; 古賀 紀光*; 川崎 卓郎; 諸岡 聡; 友野 翔平*; 梅澤 修*; Harjo, S.

Materials Science & Engineering A, 819, p.141509_1 - 141509_10, 2021/07

 被引用回数:11 パーセンタイル:83.16(Nanoscience & Nanotechnology)

In-situ neutron diffraction measurements were performed on a cold-rolled copper-iron (Cu-Fe) alloy during tensile tests at 293 K and 150 K. The roles of Cu and Fe on the deformation behavior of alloys were discussed and clarified. The strength and work-hardening rate of the alloy increased with decreasing test temperature. Furthermore, the phase stress of Fe increased considerably with decreasing test temperature; however, the response of this stress to the applied true stress exhibited no dependence on the temperature. The phase stresses of Cu changed only slightly with decreasing test temperature. However, the Cu phase stress response to the applied true stress increased with decreasing test temperature, indicating an increase in the work-hardening rate. The strengthening of Fe and the increase in the work-hardening of Cu contributed to an increase in the strength and work-hardening rate of the Cu-Fe alloy at low temperatures.

論文

Stress partitioning behavior of duplex alloys consisting of BCC and FCC phases at low temperature

山下 享介; 友野 翔平*; 諸岡 聡; Harjo, S.; 川崎 卓郎; 行木 辰弥*; 古賀 紀光*; 梅澤 修*

JPS Conference Proceedings (Internet), 33, p.011064_1 - 011064_6, 2021/03

The tensile deformation and stress partitioning behavior of duplex phase alloys consisting of FCC and BCC at low temperatures were investigated using in-situ neutron diffraction during deformation. Cu-40mass%Fe alloy rolled sheet and JIS SUS329J4L duplex stainless steel were used. Both alloys showed a good balance of strength and elongation at low temperatures. In Cu-40mass%Fe alloy, the BCC phase stress at yield point increased by decreasing test temperature. The FCC phase stress at yield point was almost constant regardless of test temperature. The FCC phase started plastic deformation at a low applied true stress. When the BCC phase yielded, phase stress of FCC increased drastically at beginning, then, it increased to applied true stress with the same rate of BCC phase stress at latter regime. On the other hand, both BCC and FCC phase stresses in SUS329J4L increased by decreasing temperature.

2 件中 1件目~2件目を表示
  • 1