Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
森 真奈美*; 山中 謙太*; 佐藤 茂男*; 椿 真貴*; 佐藤 こずえ*; 熊谷 正芳*; 今福 宗行*; 菖蒲 敬久; 千葉 明彦*
Journal of the Mechanical Behavior of Biomedical Materials, 90, p.523 - 529, 2019/02
被引用回数:19 パーセンタイル:71.16(Engineering, Biomedical)In this study, we examined the effect of pre-existing dislocation structures in a face-centered cubic gamma-phase on strain-induced martensitic transformation (SIMT) to produce a hexagonal close-packed epsilon-phase in a hot-rolled biomedical Co-Cr-Mo alloy. The as-rolled microstructure was characterized by numerous dislocations as well as stacking faults and deformation twins. SIMT occurred just after macroscopic yielding in tensile deformation. Using synchrotron X-ray diffraction line-profile analysis, we successfully captured the nucleation of epsilon-martensite during tensile deformation in terms of structural evolution in the surrounding gamma-matrix: many dislocations that were introduced into the gamma-matrix during the hot-rolling process were consumed to produce epsilon-martensite, together with strong interactions between dislocations in the gamma-matrix. As a result, the SIMT behavior during tensile deformation was accelerated through the consumption of these lattice defects, and the nucleation sites for the SIMT epsilon-phase transformed into intergranular regions upon hot rolling. Consequently, the hot-rolled Co-Cr-Mo alloy simultaneously exhibited an enhanced strain hardening and a high yield strength. The results of this study suggest the possibility of a novel approach for controlling the to SIMT behavior, and ultimately, the performance of the alloy in service by manipulating the initial dislocation structures.
鈴木 裕士; 山田 類*; 椿 真貴*; 今福 宗行*; 佐藤 成男*; 綿貫 徹; 町田 晃彦; 才田 淳治*
Metals, 6(1), p.12_1 - 12_11, 2016/01
被引用回数:3 パーセンタイル:17.57(Materials Science, Multidisciplinary)X線散乱法やひずみゲージによるマルチスケールひずみ解析により、熱処理前後の共晶および亜共晶Zr-Cu-Al三元系金属ガラスの弾性変形挙動を評価した。ダイレクトスペース法やQスペース法により求めたミクロひずみと、ひずみゲージにより測定したマクロひずみとを比較し、それらの相関から共晶および亜共晶金属ガラスの変形機構の違いを明らかにした。共晶ZrCuAl金属ガラスは、熱処理による自由体積の減少によるミクロ組織の均質化により変形抵抗は向上するものの、流動性の高いWBR(Weakly-Bonded Region)の減少にともなって延性を失うことがわかった。一方、亜共晶ZrCuAl金属ガラスでは、もともと均質なミクロ組織を有しているものの、熱処理によるナノクラスター形成により、ミクロ組織の均質性および弾性均質性が失われることが分かった。このような熱処理に伴う組織変化は、構造緩和しても、延性や靭性が減少しないという亜共晶金属ガラスのユニークな機械的特性を生み出す要因と考えられる。