Development of laser welding technology for fully austenite stainless steel

Takano, Katsutoshi; Koizumi, Norikiyo; Serizawa, Hisashi*; Tsubota, Shuho*; Makino, Yoshinobu*

Yosetsu Gakkai Rombunshu (Internet), 33(2), p.126 - 132, 2015/06

https://doi.org/10.2207/qjjws.33.126

A radial plates (RP), which is used in Toroidal field (TF) coil in ITER, is significantly large, such as 13 m height and 9 m wide, but thin, such as 10 cm thick, and are made of full-austenite stainless steel. Even though they are very large structures, high manufacturing tolerances are required. In addition, it is required that each RP is fabricated every three weeks. Therefore, the authors develop efficient manufacturing methods of RP. The laser welding is selected as a welding method of RP. But the development of the high power laser welding technology is necessary to avoid hot cracking of the materials used for RP, namely full austenite stainless steel with high nitrogen content. The authors carried out trial aiming at an application of the laser welding to RP. As a result, it is effective to optimize the angle of inclination of the weld head. It also seems sensitivity of hot cracking can be less by optimizing the chemical composition of materials to use for RP. It was therefore demonstrated that the application of the laser welding technology in the full austenite stainless steel.