Refine your search:     
Report No.
 - 
Search Results: Records 1-20 displayed on this page of 705

Presentation/Publication Type

Initialising ...

Refine

Journal/Book Title

Initialising ...

Meeting title

Initialising ...

First Author

Initialising ...

Keyword

Initialising ...

Language

Initialising ...

Publication Year

Initialising ...

Held year of conference

Initialising ...

Save select records

JAEA Reports

Utilization of gamma ray irradiation at the WASTEF Facility

Sano, Naruto; Yamashita, Naoki; Watanabe, Masaya; Tsukada, Manabu*; Hoshino, Kazutoyo*; Hirai, Koki; Ikegami, Yuta*; Tashiro, Shinsuke; Yoshida, Ryoichiro; Hatakeyama, Yuichi; et al.

JAEA-Technology 2023-029, 36 Pages, 2024/03

JAEA-Technology-2023-029.pdf:2.47MB

At the Waste Safety Testing Facility (WASTEF), the gamma ray irradiation device "Gamma Cell 220" was relocated from the 4th research building of the Nuclear Science Research Institute in FY2019, and the use of gamma ray irradiation has begun. Initially, Fuel Cycle Safety Research Group, Fuel Cycle Safety Research Division, Nuclear Safety Research Center, Sector of Nuclear Safety Research and Emergency Preparedness, the owner of this device, conducted the tests as the main user, but since 2022, other users, including those outside the organization, have started using it. The gamma ray irradiation device "Gamma Cell 220" is manufactured by Nordion International Inc. in Canada. Since it was purchased in 1989, the built-in 60Co radiation source has been updated once, and safety research related to nuclear fuel cycles, etc. It is still used for this purpose to this day. This report summarizes the equipment overview of the gamma ray irradiation device "Gamma Cell 220", its permits and licenses at WASTEF, usage status, maintenance and inspection, and future prospects.

Journal Articles

Quantum critical behavior of the hyperkagome magnet Mn$$_3$$CoSi

Yamauchi, Hiroki; Sari, D. P.*; Yasui, Yukio*; Sakakura, Terutoshi*; Kimura, Hiroyuki*; Nakao, Akiko*; Ohara, Takashi; Honda, Takashi*; Kodama, Katsuaki; Igawa, Naoki; et al.

Physical Review Research (Internet), 6(1), p.013144_1 - 013144_9, 2024/02

Journal Articles

Update of Bragg edge analysis software "GUI-RITS"

Oikawa, Kenichi; Sato, Hirotaka*; Watanabe, Kenichi*; Su, Y. H.; Shinohara, Takenao; Kai, Tetsuya; Kiyanagi, Yoshiaki*; Hasemi, Hiroyuki

Journal of Physics; Conference Series, 2605, p.012013_1 - 012013_6, 2023/10

Journal Articles

Ion beam induced luminescence analysis of europium complexes in styrene-divinylbenzene copolymer-coated spherical silica by proton and argon ion beams irradiation

Nakahara, Masaumi; Watanabe, So; Takeuchi, Masayuki; Yuyama, Takahiro*; Ishizaka, Tomohisa*; Ishii, Yasuyuki*; Yamagata, Ryohei*; Yamada, Naoto*; Koka, Masashi*; Kada, Wataru*; et al.

Nuclear Instruments and Methods in Physics Research B, 542, p.144 - 150, 2023/09

 Times Cited Count:0 Percentile:0.02(Instruments & Instrumentation)

The structures of Eu complexes in the adsorbents prepared with various extractants were evaluated by ion beam induced luminescence analysis in an extraction chromatography for minor actinides recovery. The luminescence of Eu was measured with a proton beam obtained from the single-ended accelerator and an argon ion beam obtained from the azimuthally varying field cyclotron in Takasaki Ion Accelerators for Advanced Radiation Application in National Institutes for Quantum Science and Technology. In this study, it was confirmed that the spectral shape of Eu complexes in the adsorbents varied depending on the kinds of extractants, and the correlation between the change in the spectra and the structures of Eu complexes was investigated.

Journal Articles

Evaluation of the remaining spent extraction solvent in vermiculite after leaching tests via PIXE analysis

Arai, Yoichi; Watanabe, So; Hasegawa, Kenta; Okamura, Nobuo; Watanabe, Masayuki; Takeda, Keisuke*; Fukumoto, Hiroki*; Ago, Tomohiro*; Hagura, Naoto*; Tsukahara, Takehiko*

Nuclear Instruments and Methods in Physics Research B, 542, p.206 - 213, 2023/09

 Times Cited Count:0 Percentile:0.02(Instruments & Instrumentation)

JAEA Reports

Differential pressure rise event for filters of HTTR primary helium gas circulators, 1; Investigation of differential pressure rise event

Nemoto, Takahiro; Arakawa, Ryoki; Kawakami, Satoru; Nagasumi, Satoru; Yokoyama, Keisuke; Watanabe, Masashi; Onishi, Takashi; Kawamoto, Taiki; Furusawa, Takayuki; Inoi, Hiroyuki; et al.

JAEA-Technology 2023-005, 33 Pages, 2023/05

JAEA-Technology-2023-005.pdf:5.25MB

During shut down of the HTTR (High Temperature engineering Test Reactor) RS-14 cycle, an increasing trend of filter differential pressure for the helium gas circulator was observed. In order to investigate this phenomenon, the blower of the primary helium purification system was disassembled and inspected. As a result, it is clear that the silicon oil mist entered into the primary coolant due to the deterioration of the charcoal filter performance. The replacement and further investigation of the filter are planning to prevent the reoccurrence of the same phenomenon in the future.

Journal Articles

Ion beam induced luminescence spectra of europium complexes in silica-based adsorbent

Nakahara, Masaumi; Watanabe, So; Ishii, Yasuyuki*; Yamagata, Ryohei*; Yamada, Naoto*; Koka, Masashi*; Yuyama, Takahiro*; Ishizaka, Tomohisa*; Kada, Wataru*; Hagura, Naoto*

QST-M-39; QST Takasaki Annual Report 2021, P. 62, 2023/02

In an extraction chromatography method for minor actinides recovery, analysis for the structure of complex in a silica-based adsorbent has been studied to separate minor actinides efficiently. In this study, Eu was used as simulated material of minor actinides, and silica-based adsorbents containing Eu complex were prepared. The ion beam induced luminescence spectra of Eu complexes in silica-based adsorbents were measured, and the basic data for the structures of Eu complexes were obtained.

Journal Articles

Liquid phase sintering of alumina-silica co-doped cerium dioxide CeO$$_{2}$$ ceramics

Vauchy, R.; Hirooka, Shun; Watanabe, Masashi; Yokoyama, Keisuke; Sunaoshi, Takeo*; Yamada, Tadahisa*; Nakamichi, Shinya; Murakami, Tatsutoshi

Ceramics International, 49(2), p.3058 - 3065, 2023/01

 Times Cited Count:8 Percentile:75.06(Materials Science, Ceramics)

Journal Articles

Investigation of adsorption mechanism of Mo(VI) by baker's yeast and applicability to the uranium liquid waste treatment process

Arai, Yoichi; Hasegawa, Kenta; Watanabe, So; Watanabe, Masayuki; Minowa, Kazuki*; Matsuura, Haruaki*; Hagura, Naoto*; Katsuki, Kenta*; Arai, Tsuyoshi*; Konishi, Yasuhiro*

Journal of Radioanalytical and Nuclear Chemistry, 9 Pages, 2023/00

 Times Cited Count:0 Percentile:0.01(Chemistry, Analytical)

Journal Articles

Calculation of deuteron-induced reaction cross-sections for nuclear transmutation of long-lived fission products

Nakayama, Shinsuke; Furutachi, Naoya; Iwamoto, Osamu; Watanabe, Yukinobu*

NEA/NSC/R(2020)4 (Internet), p.345 - 349, 2022/10

Long-lived fission products (LLFPs) generated in nuclear reactors are strongly desired to be converted to stable or short-lived nuclides. Recently, it has been considered to transmute LLFPs by spallation reactions with high energy particles, and some experimental studies revealed that spallation reaction cross-sections induced by deuteron are larger than proton-induced ones. These results suggest the possibility that nuclear transmutation of LLFPs using deuteron beams is more efficient than one using proton beams. On the other hand, we have been developing a code system dedicated for deuteron-induced reactions, called DEURACS. DEURACS has been originally developed to contribute to the design of deuteron accelerator neutron sources. In the present study, we apply DEURACS to calculation of deuteron-induced spallation reactions on LLFPs. Through comparison with measured data, the applicability of DEURACS will be discussed.

Journal Articles

Design and actual performance of J-PARC 3 GeV rapid cycling synchrotron for high-intensity operation

Yamamoto, Kazami; Kinsho, Michikazu; Hayashi, Naoki; Saha, P. K.; Tamura, Fumihiko; Yamamoto, Masanobu; Tani, Norio; Takayanagi, Tomohiro; Kamiya, Junichiro; Shobuda, Yoshihiro; et al.

Journal of Nuclear Science and Technology, 59(9), p.1174 - 1205, 2022/09

 Times Cited Count:6 Percentile:84.97(Nuclear Science & Technology)

In the Japan Proton Accelerator Research Complex, the purpose of the 3 GeV rapid cycling synchrotron (RCS) is to accelerate a 1 MW, high-intensity proton beam. To achieve beam operation at a repetition rate of 25 Hz at high intensities, the RCS was elaborately designed. After starting the RCS operation, we carefully verified the validity of its design and made certain improvements to establish a reliable operation at higher power as possible. Consequently, we demonstrated beam operation at a high power, namely, 1 MW. We then summarized the design, actual performance, and improvements of the RCS to achieve a 1 MW beam.

Journal Articles

Investigation of physical properties of glove for glove-box and estimation of its life-time

Kobayashi, Daisuke; Yamamoto, Masahiko; Nishida, Naoki; Miyoshi, Ryuta; Nemoto, Ryo*; Hayashi, Hiroyuki*; Kato, Keisuke; Nishino, Saki; Kuno, Takehiko; Kitao, Takahiko; et al.

Nihon Hozen Gakkai Dai-18-Kai Gakujutsu Koenkai Yoshishu, p.237 - 240, 2022/07

All gloves attached to glove-box in Tokai Reprocessing Plant have a fixed expiration date and have to be replaced every 4-year. However, degrees of glove deterioration are different depending on its usage environment (frequency, chemicals, radiation, etc.), because of rubber products. Therefore, physical properties such as tensile strength, elongation, hardness of gloves are measured, and the life-time of gloves are estimated. As a result, gloves without any defects in its appearance have enough physical property for acceptance criteria of new glove. The extrapolated physical property of glove is sufficiently larger than the reported values of damaged glove. No deterioration in physical properties of gloves, that are periodically replaced without any defects in its appearance, is observed and the usable life-time of the glove is estimated to be 8 years.

Journal Articles

Neutron imaging of generated water inside polymer electrolyte fuel cell using newly-developed gas diffusion layer with gas flow channels during power generation

Nasu, Mitsunori*; Yanai, Hiroshi*; Hirayama, Naoki*; Adachi, Hironori*; Kakizawa, Yu*; Shirase, Yuto*; Nishiyama, Hiromichi*; Kawamoto, Teppei*; Inukai, Junji*; Shinohara, Takenao; et al.

Journal of Power Sources, 530, p.231251_1 - 231251_11, 2022/05

 Times Cited Count:16 Percentile:89.77(Chemistry, Physical)

Journal Articles

Strain distribution visualization of punched electrical steel sheets using neutron Bragg-edge transmission imaging

Sasada, Seiji*; Takahashi, Yoshihito*; Takeuchi, Keisuke*; Hiroi, Kosuke; Su, Y. H.; Shinohara, Takenao; Watanabe, Kenichi*; Uritani, Akira*

Japanese Journal of Applied Physics, 61(4), p.046004_1 - 046004_8, 2022/03

 Times Cited Count:0 Percentile:0(Physics, Applied)

Journal Articles

Improving the safety of the high temperature gas-cooled reactor "HTTR" based on Japan's new regulatory requirements

Hamamoto, Shimpei; Shimizu, Atsushi; Inoi, Hiroyuki; Tochio, Daisuke; Homma, Fumitaka; Sawahata, Hiroaki; Sekita, Kenji; Watanabe, Shuji; Furusawa, Takayuki; Iigaki, Kazuhiko; et al.

Nuclear Engineering and Design, 388, p.111642_1 - 111642_11, 2022/03

 Times Cited Count:2 Percentile:53.91(Nuclear Science & Technology)

Following the Fukushima Daiichi Nuclear Power Plant accident in 2011, the Japan Atomic Energy Agency adapted High-Temperature engineering Test Reactor (HTTR) to meet the new regulatory requirements that began in December 2013. The safety and seismic classifications of the existing structures, systems, and components were discussed to reflect insights regarding High Temperature Gas-cooled Reactors (HTGRs) that were acquired through various HTTR safety tests. Structures, systems, and components that are subject to protection have been defined, and countermeasures to manage internal and external hazards that affect safety functions have been strengthened. Additionally, measures are in place to control accidents that may cause large amounts of radioactive material to be released, as a beyond design based accident. The Nuclear Regulatory Commission rigorously and appropriately reviewed this approach for compliance with the new regulatory requirements. After nine amendments, the application to modify the HTTR's installation license that was submitted in November 2014 was approved in June 2020. This response shows that facilities can reasonably be designed to meet the enhanced regulatory requirements, if they reflect the characteristics of HTGRs. We believe that we have established a reference for future development of HTGR.

Journal Articles

CFD analysis of natural circulation in LBE-cooled accelerator-driven system

Sugawara, Takanori; Watanabe, Nao; Ono, Ayako; Nishihara, Kenji; Ichihara, Kyoko*; Hanzawa, Kohei*

Proceedings of 19th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-19) (Internet), 10 Pages, 2022/03

Japan Atomic Energy Agency (JAEA) has investigated an accelerator-driven system (ADS) to transmute minor actinides (MAs) included in high level wastes discharged from nuclear power plants. The ADS is a lead-bismuth cooled tank-type reactor with 800 MW thermal power. It is supposed that the ADS is safer than conventional critical reactors because it is operated in a subcritical state. The previous study performed the transient analyses for the typical ADS accidents such as unprotected loss of flow or beam overpower. It was shown that all calculation cases except loss of heat sink (LOHS) satisfied the no-damage criteria. To avoid the damage by LOHS, the ADS equips Direct Reactor Auxiliary Cooling System (DRACS) to remove the decay heat. The most important points of a DRACS operation are its reliability and to ensure the flowrate in a natural circulation state. This study aims to perform the CFD analysis of the natural circulation to clarify the flowrate in the ADS reactor vessel.

JAEA Reports

Annual report on the environmental radiation monitoring around the Tokai Reprocessing Plant FY2020

Nakada, Akira; Nakano, Masanao; Kanai, Katsuta; Seya, Natsumi; Nishimura, Shusaku; Nemoto, Masashi; Tobita, Keiji; Futagawa, Kazuo; Yamada, Ryohei; Uchiyama, Rei; et al.

JAEA-Review 2021-062, 163 Pages, 2022/02

JAEA-Review-2021-062.pdf:2.87MB

Environmental radiation monitoring around the Tokai Reprocessing Plant has been performed by the Nuclear Fuel Cycle Engineering Laboratories, based on "Safety Regulations for the Reprocessing Plant of Japan Atomic Energy Agency, Chapter IV - Environmental Monitoring". This annual report presents the results of the environmental monitoring and the dose estimation to the hypothetical inhabitant due to the radioactivity discharged from the plant to the atmosphere and the sea during April 2020 to March 2021. In this report, some data include the influence of the accidental release from the Fukushima Daiichi Nuclear Power Station of Tokyo Electric Power Co., Inc. (the trade name was changed to Tokyo Electric Power Company Holdings, Inc. on April 1, 2016) in March 2011. Appendices present comprehensive information, such as monitoring programs, monitoring methods, monitoring results and their trends, meteorological data and discharged radioactive wastes. In addition, the data which were influenced by the accidental release and exceeded the normal range of fluctuation in the monitoring, were evaluated.

Journal Articles

Age-hardening mechanisms of heterogeneous-nanostructured SUS316LN stainless steel fabricated by heavy cold rolling

Miura, Hiromi*; Watanabe, Chihiro*; Aoyagi, Yoshiteru*; Oba, Yojiro; Kobayashi, Masakazu*; Yoshinaga, Naoki*

Materials Science & Engineering A, 833, p.142531_1 - 142531_12, 2022/01

 Times Cited Count:3 Percentile:45.58(Nanoscience & Nanotechnology)

Journal Articles

PSTEP: Project for solar-terrestrial environment prediction

Kusano, Kanya*; Ichimoto, Kiyoshi*; Ishii, Mamoru*; Miyoshi, Yoshizumi*; Yoden, Shigeo*; Akiyoshi, Hideharu*; Asai, Ayumi*; Ebihara, Yusuke*; Fujiwara, Hitoshi*; Goto, Tadanori*; et al.

Earth, Planets and Space (Internet), 73(1), p.159_1 - 159_29, 2021/12

 Times Cited Count:6 Percentile:51.19(Geosciences, Multidisciplinary)

The PSTEP is a nationwide research collaboration in Japan and was conducted from April 2015 to March 2020, supported by a Grant-in-Aid for Scientific Research on Innovative Areas from the Ministry of Education, Culture, Sports, Science and Technology of Japan. It has made a significant progress in space weather research and operational forecasts, publishing over 500 refereed journal papers and organizing four international symposiums, various workshops and seminars, and summer school for graduate students at Rikubetsu in 2017. This paper is a summary report of the PSTEP and describes the major research achievements it produced.

Journal Articles

High-spatial-resolution measurement of magnetization distribution using polarized neutron imaging

Sasada, Seiji*; Hiroi, Kosuke; Osanai, Kenta*; Shinohara, Takenao; Watanabe, K.*; Uritani, Akira*

Japanese Journal of Applied Physics, 60(12), p.126003_1 - 126003_6, 2021/12

 Times Cited Count:1 Percentile:7.86(Physics, Applied)

705 (Records 1-20 displayed on this page)