Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Arai, Yoichi; Watanabe, So; Ono, Shimpei; Nomura, Kazunori; Nakamura, Fumiya*; Arai, Tsuyoshi*; Seko, Noriaki*; Hoshina, Hiroyuki*; Hagura, Naoto*; Kubota, Toshio*
Nuclear Instruments and Methods in Physics Research B, 477, p.54 - 59, 2020/08
Times Cited Count:2 Percentile:46.37(Instruments & Instrumentation)Watanabe, Takahiro; Tsuchiya, Noriyoshi*; Yamasaki, Shinichi*; Sawai, Yuki*; Hosoda, Norihiro*; Nara, Fumiko*; Nakamura, Toshio*; Komai, Takeshi*
Applied Geochemistry, 118, p.104644_1 - 104644_11, 2020/07
Times Cited Count:9 Percentile:65.99(Geochemistry & Geophysics)Possible tsunami inundation areas can be predicted from the distribution of paleo tsunami deposits, which are mainly composed of marine-derived sands and muds on land. Such exotic sandy and muddy layers have been identified by multiple approaches. However, there still remain uncertainties and other useful proxies need to be investigated for the identification of tsunami deposits. Here we show the geochemical signatures of modern tsunami deposits from the Pacific coast of Northeast Japan (2011 Tohoku tsunami), as well as those paleo tsunami deposits, which were taken from the Tohoku District (Jogan, ca. 1080 calibrated ages before present [cal BP] and Yayoi, ca. 2000 cal BP). A geochemical ternary diagram (Seawater-Rock-(As+Metals)) enables the weathering trend of tsunami deposits over ca. 2000 years in the Sendai Plain in the Tohoku to be shown. In the paleo tsunami layers from the Tohoku, the Na/Ti atomic ratios markedly increased to 23.4, and the average values were 19.33.0 (Jogan and Yayoi tsunami deposits), which were clearly higher than those of other layers (soil deposits, 10.33.5 on average). These results show that the Na/Ti ratio is a useful indicator of marine incursions in our case. Our rapid and simple method using the Na/Ti ratio can be easily applied to the Tohoku, and it may contribute to the detection of unrecorded muddy tsunami deposits.
Arai, Yoichi; Watanabe, So; Ono, Shimpei; Nomura, Kazunori; Nakamura, Fumiya*; Arai, Tsuyoshi*; Seko, Noriaki*; Hoshina, Hiroyuki*; Kubota, Toshio*
QST-M-23; QST Takasaki Annual Report 2018, P. 59, 2020/03
Watanabe, So; Ogi, Hiromichi*; Arai, Yoichi; Aihara, Haruka; Takahatake, Yoko; Shibata, Atsuhiro; Nomura, Kazunori; Kamiya, Yuichi*; Asanuma, Noriko*; Matsuura, Haruaki*; et al.
Progress in Nuclear Energy, 117, p.103090_1 - 103090_8, 2019/11
Times Cited Count:9 Percentile:78.07(Nuclear Science & Technology)Arai, Yoichi; Watanabe, So; Ono, Shimpei; Nakamura, Masahiro; Shibata, Atsuhiro; Nakamura, Fumiya*; Arai, Tsuyoshi*; Seko, Noriaki*; Hoshina, Hiroyuki*; Hagura, Naoto*; et al.
International Journal of PIXE, 29(1&2), p.17 - 31, 2019/00
The spent PUREX solvent containing U and Pu is generated from the reprocessing process of spent nuclear fuel. The nuclear material removal is important for the safe storage or disposal of the spent solvent. Our previous study revealed that the adsorbent with the iminodiacetic acid (IDA) functional group is one of the most promising materials for designing the nuclear material recovery process. Accordingly, an IDA-type adsorbent was synthesized by using graft polymerization technology or a chemical reaction to improve the adsorption rate and capacity. The synthesized IDA-type adsorbent was characterized by micro particle-induced X-ray emission (PIXE) and extended X-ray absorption fine structure (EXAFS) analyses. The micro-PIXE analysis revealed that Zr was adsorbed on the whole synthesized adsorbents and quantified the microamount of adsorbed Zr. Moreover, EXAFS suggested that Zr in the aqueous solution and solvent can be trapped by the IDA group with different mechanisms.
Watanabe, Masashi*; Yonezawa, Toshio*; Shobu, Takahisa; Shiro, Ayumi; Shoji, Tetsuo*
Corrosion, 72(9), p.1155 - 1169, 2016/09
Times Cited Count:1 Percentile:6.34(Materials Science, Multidisciplinary)Sakai, Hiroshi*; Enami, Kazuhiro*; Furuya, Takaaki*; Kako, Eiji*; Kondo, Yoshinari*; Michizono, Shinichiro*; Miura, Takako*; Qiu, F.*; Sato, Masato*; Shinoe, Kenji*; et al.
Proceedings of 56th ICFA Advanced Beam Dynamics Workshop on Energy Recovery Linacs (ERL 2015) (Internet), p.63 - 66, 2015/12
no abstracts in English
Watanabe, Masashi*; Yonezawa, Toshio*; Shobu, Takahisa; Shoji, Tetsuo*
Corrosion, 71(10), p.1224 - 1236, 2015/10
Times Cited Count:3 Percentile:18.06(Materials Science, Multidisciplinary)Shibata, Toshio*; Watanabe, Masatoshi; Taniguchi, Naoki; Shimizu, Akihiko*
Zairyo To Kankyo, 62(2), p.70 - 77, 2013/02
In the oxygen depleted underground environment, carbon steel reacts with HO, producing H gas and forming corrosion film on the steel surface. Corrosion rate is controlled by diffusion of reaction species through corrosion film. Diffusion constants of some species working in the corrosion process were obtained from literatures. However, no data were found on the diffusion constant of HO in iron oxides based on an appropriate assumption. Mass transfer model for the corrosion rate was used to simulate the corrosion rate of carbon steel. Liquid phase diffusion model of Fe or HO through pores in the corrosion film and solid phase diffusion model of HO through corrosion film itself were examined by Excel simulation. Change in corrosion current density and corrosion loss with time and pH and temperature dependence of corrosion current density were examined. By comparing the results, it is suggested that the solid phase diffusion of HO in the corrosion film controls the corrosion rate of carbon steel in oxygen depleted environment.
Umemori, Kensei*; Furuya, Takaaki*; Kako, Eiji*; Noguchi, Shuichi*; Sakai, Hiroshi*; Sato, Masato*; Shishido, Toshio*; Watanabe, Ken*; Yamamoto, Yasuchika*; Shinoe, Kenji*; et al.
Proceedings of 15th International Conference on RF Superconductivity (SRF 2011) (Internet), p.956 - 961, 2011/07
The Compact ERL (cERL) project is advanced in Japan. Its aim is to demonstrate the circulation of 100 mA electron beams with energy of 35-200 MeV. Superconducting cavities are key components for realizing ERL and used for injector part and main linac part. Critical issue for the injector part is the development of input power coupler. Prototype input couplers were fabricated and high power test was performed. Cooling ability of HOM coupler is also important for CW operation of cavity. At main linac part, HOM damped 9-cell cavities are applied to avoid BBU instabilities. Prototypes were fabricated for the cavity, the input coupler and the HOM absorber. Their performance was investigated. For both parts, cryomodules are under construction and will be completed in 2012.
Sakanaka, Shogo*; Akemoto, Mitsuo*; Aoto, Tomohiro*; Arakawa, Dai*; Asaoka, Seiji*; Enomoto, Atsushi*; Fukuda, Shigeki*; Furukawa, Kazuro*; Furuya, Takaaki*; Haga, Kaiichi*; et al.
Proceedings of 1st International Particle Accelerator Conference (IPAC '10) (Internet), p.2338 - 2340, 2010/05
Future synchrotron light source using a 5-GeV energy recovery linac (ERL) is under proposal by our Japanese collaboration team, and we are conducting R&D efforts for that. We are developing high-brightness DC photocathode guns, two types of cryomodules for both injector and main superconducting (SC) linacs, and 1.3 GHz high CW-power RF sources. We are also constructing the Compact ERL (cERL) for demonstrating the recirculation of low-emittance, high-current beams using above-mentioned critical technologies.
Sakai, Hiroshi*; Furuya, Takaaki*; Kako, Eiji*; Noguchi, Shuichi*; Sato, Masato*; Sakanaka, Shogo*; Shishido, Toshio*; Takahashi, Takeshi*; Umemori, Kensei*; Watanabe, Ken*; et al.
Proceedings of 45th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL '09) (Internet), p.57 - 62, 2010/05
Development of a SC Cavity Injector Cryomodule and Main linac Cryomodule for the compact ERL is being continued at KEK since 2006. Design of an injector cryomodule containing three 2-cell 1.3-GHz cavities for Injector Cryomodule and two 9-cell 1.3-GHz cavities for Main linac Cryomodule are almost completed. Status of R&D and design details are reported.
Terauchi, Makoto; Watanabe, Toshio; Sakakibara, Yasuhide; Tanaka, Teruhisa*; Masudaya, Kosei*
Shiseki "Suzu Tokigama Ato" Kuni Shitei Kinen Shimpojiumu Hokokusho, p.85 - 112, 2010/03
JAEA has had many kinds of meetings for technology exchange willingly as an activity to widely make use of the accumulation of the results of research and development on the way to develop FBR "Monju" in general industry. In this report, one of the local traditional industries of Fukui Prefecture, "Echizen pottery" is featured to show an activity of technological exchange. JAEA established a "technological exchange group on Echizen pottery" to scientifically find out the process until firing ends by analyzing behaviors including temperature distribution and flow condition of the inside of anagama with an analyzing technology (thermal Hydraulics), one of our representative research results. This is a report to show the content which has been discussed and evaluated based on the results of firing experiments and their analysis in this group.
Umemori, Kensei*; Furuya, Takaaki*; Kako, Eiji*; Noguchi, Shuichi*; Sakai, Hiroshi*; Sato, Masato*; Shishido, Toshio*; Takahashi, Takeshi*; Watanabe, Ken*; Yamamoto, Yasuchika*; et al.
Proceedings of 14th International Conference on RF Superconductivity (SRF 2009) (Internet), p.896 - 901, 2009/09
Construction of the Compact ERL is planned in Japan, in order to test the key technology to realize a future ERL based X-ray light source. The operation of 60-200 MeV beam energy and 100 mA beam current are proposed. The superconducting cavity is one of the key components and applied for the injector part and the main linac part. At the injector part, most challenging issue is an input coupler, which has to handle more than 300 kW input power per cavity. On the other hand, strong HOM damping is required for the main linac, in order to avoid beam instabilities and large heat load at cryomodules. Status of cavity developments, together with cryomodule developments, including input couplers and HOM couplers/absorbers, are described in this paper.
Yanagi, Hiroshi*; Watanabe, Takumi*; Kodama, Katsuaki; Iikubo, Satoshi*; Shamoto, Shinichi; Kamiya, Toshio*; Hirano, Masahiro*; Hosono, Hideo*
Journal of Applied Physics, 105(9), p.093916_1 - 093916_8, 2009/05
Times Cited Count:47 Percentile:83.41(Physics, Applied)Electronic and magnetic properties of a layered compound LaMnPO are examined in relation to a newly discovered iso-structural superconductor LaFeAs(P)O. Neutron diffraction measurements, together with temperature dependent magnetic susceptibility, clarify that LaMnPO is an antiferromagnet at least up to 375 K. The spin moment of a Mn ion is determined to be 2.26 at room temperature, and the spin configuration is antiparallel in the Mn-P plane and parallel to between the Mn-P planes, which is rather different from that of LaFeAsO. Optical absorption spectra, photoemission spectra, and temperature dependent electrical conductivity indicate that LaMnPO is a semiconductor. Furthermore, nominally undoped LaMnPO exhibits -type conduction while the conduction type is changed by doping of Cu or Ca to the La sites, indicating that LaMnPO is a bipolar conductor. Density functional calculation using the GGA+U approximation supports the above conclusions; the electronic band structure has an open band gap and the antiferromagnetic spin configuration is more stable than the ferromagnetic one.
Tomita, Kenji; Tsuchiya, Kunihiko; Onuma, Yuichi; Inoue, Shuichi; Watanabe, Hiroyuki; Saito, Takashi; Kikuchi, Taiji; Hayashi, Kimio; Kitajima, Toshio
JAEA-Technology 2008-036, 61 Pages, 2008/06
The second in-situ irradiation experiment using a mock-up (ORIENT-II, JMTR capsule Number: 99M-54J) with a tritium breeder (LiTiO) pebble bed in the Japan Materials Testing Reactor (JMTR) was finished on Aug. 1, 2006. Consideration on the detaching procedure of the irradiated mock-up contaminated with tritium with pebble bed and a detaching test of this mock-up was carried out. The tritium removal properties were examined in the irradiated mock-up, the sweep gas tube, the protective tube and the junction box, for the decreasing of the tritium release to the area of detaching test. Melting/enclosed tests of sealing plug were also carried out for the prevention of tritium leakage from sweep gas lines of pebble bed. Then, the detaching test of the pebble bed was carried out. This report describes the results of tritium removal tests, examination of the detaching procedure, and the detaching test, as well as knowledge obtained from these tests and works.
Yamamoto, Yasuchika*; Hayano, Hitoshi*; Kako, Eiji*; Noguchi, Shuichi*; Sato, Masato*; Shishido, Toshio*; Umemori, Kensei*; Watanabe, Ken*; Sakai, Hiroshi*; Shinoe, Kenji*; et al.
Proceedings of 5th Annual Meeting of Particle Accelerator Society of Japan and 33rd Linear Accelerator Meeting in Japan (CD-ROM), p.888 - 891, 2008/00
In KEK, the new Superconducting RF Test Facility(STF) is being constructed, including the electro-polish system (EP), the high pressure rinsing system (HPR), the clean-room, the refrigerator system, the high power RF source system, and the vertical test system. The cavity is generally measured in the vertical cryostat for the performance test. The new vertical test facility was constructed since the last year, and completed at the beginning of March. The first test was done for the total system check at the beginning of July.
Yamamoto, Kazuya; Watanabe, Fumitaka; Matsuoka, Toshio*; Kozawa, Toshikatsu*
JNC TN1420 2005-001, 366 Pages, 2005/06
In relation to
Nishitani, Tomohiro; Nakanishi, Tsutomu*; Yamamoto, Masahiro*; Okumi, Shoji*; Furuta, Fumio*; Miyamoto, Masaharu*; Kuwahara, Makoto*; Yamamoto, Naoto*; Naniwa, Kenichi*; Watanabe, Osamu*; et al.
Journal of Applied Physics, 97(9), p.094907_1 - 094907_6, 2005/05
Times Cited Count:64 Percentile:87.35(Physics, Applied)no abstracts in English
Watanabe, Daisuke*; Che, D.-C.*; Fukuyama, Tetsuya*; Hashinokuchi, Michihiro*; Teraoka, Yuden; Kasai, Toshio*
Review of Scientific Instruments, 76(5), p.055108_1 - 055108_5, 2005/05
Times Cited Count:6 Percentile:33.47(Instruments & Instrumentation)A molecular beam technique for generating an intense pulsed hyperthermal molecular beam (HTMB) was developed. The beam source consists of a pulse valve, a cooling-water bottle that protectes the pulse valve from heat transfer of a high temperature nozzle, and the nozzle with a heater. The pulsed HTMB of HCl was practically generated and characterized by means of (2+1) resonance-enhanced multiphoton ionization and ion time-of-flight techniques.