Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Song, Y.*; Xu, S.*; 大森 俊洋*; 川崎 卓郎; 石川 喜久*; 鬼柳 亮嗣; 貝沼 亮介*
Nature Communications (Internet), 17, p.3747_1 - 3747_8, 2026/04
被引用回数：0 パーセンタイル：0.00(Multidisciplinary Sciences)The elastocaloric effect, driven by stress-induced martensitic transformations, offers a promising route toward efficient and environmentally friendly solid-state cooling. However, its practical implementation has been hindered by an inherent trade-off: materials exhibiting large isothermal entropy changes typically operate over narrow temperature windows, thereby limiting their overall cooling performance. Here, we demonstrate an elastocaloric response in a Ti-Al-Cr superelastic alloy that overcomes this limitation. Direct measurements reveal a pronounced elastocaloric cooling effect over an ultra-wide temperature range of 305 K, from 97 K to 402 K. This temperature span exceeds that predicted by the Clausius-Clapeyron relationship (235 K), indicating a significant deviation from conventional thermodynamic expectations. At room temperature, a large adiabatic temperature change of ~10 K is directly measured, corresponding to a cooling output of 5.76 Jg
and a material coefficient of performance of 4.6, demonstrating competitive cooling performance at practical operating conditions. In addition, the elastocaloric response is maintained over the entire temperature range despite the expected decrease in entropy change at lower temperatures, indicating that the conventional trade-off between temperature span and cooling strength is effectively mitigated. This exceptional behavior originates from a combination of anomalous temperature dependence of the critical stress for martensitic transformation and high mechanical strength, which together enable fully reversible stress-induced transformations across a broad thermal domain. Our findings reveal a new regime of elastocaloric behavior and establish a guiding principle for overcoming the apparent limitations imposed by Clausius-Clapeyron-based descriptions in caloric materials.
Zn
Mo
O
Bao, S.*; Liao, J.*; Huang, Z.*; Shangguan, Y.*; Ma, Z.*; Zhang, B.*; Cheng, S.*; Xu, H.*; Song, Z.*; Dong, S.*; et al.
Physical Review Letters, 136(9), p.096502_1 - 096502_8, 2026/03
被引用回数：3 パーセンタイル：80.48(Physics, Multidisciplinary)Lattice vibrations can carry angular momentum and magnetic moments under broken inversion or time-reversal symmetry, forming so-called chiral phonons. While such excitations have been explored in nonmagnetic systems via optical probes, their direct detection in magnetic materials and coupling to spin excitations remain largely unexplored. Here, using neutron spectroscopy, sensitive to both nuclear and magnetic scattering, we reveal the magnetic signature of chiral phonons in ferrimagnetic FeZnMoO with Curie temperature 
K. Below 
, we observe enhanced magnetic scattering of phonons at small momenta, arising from strong magnon-phonon coupling. In addition, out-of-plane intensity modulation, phonon mode splitting, and field-induced Zeeman shifts are observed, all closely associated with the ferrimagnetic order. These features vanish above , where phonon spectra are dominated by nuclear scattering. These observations demonstrate the existence of chiral phonons carrying substantial magnetic moments that directly contribute to magnetic scattering, and establish neutron spectroscopy as a powerful, momentum-resolved probe of their magnetic character.
O
Gao, B.*; Chen, T.*; Liu, C.*; Klemm, M. L.*; Zhang, S.*; Ma, Z.*; Xu, X.*; Won, C.*; McCandless, G. T.*; Rao, K.*; et al.
Science Advances (Internet), 12(10), p.eaed7778_1 - eaed7778_7, 2026/03
In the search for unconventional magnetism, exotic quantum states are characterized by a lack of order and a broad spin excitation continuum approaching zero temperature. We study the two-dimensional triangular-lattice effective spin-system CeMgAlO, which shows slight disorder but no magnetic ordering down to 100 millikelvin. Spin-wave analysis in the magnetic-field-polarized state determines the spin Hamiltonian featuring a mixed ferromagnetic-antiferromagnetic nearest-neighbor exchange interaction. This places the system near an exactly solvable point of the spin-triangular-lattice XXZ model with extensive ground-state degeneracy. In zero field, neutron spectroscopy reveals a prominent continuum; we show that this arises from an ensemble average of spin-wave spectra across the degenerate ground-state manifold. This demonstrates that the role of weak quenched disorder can be quantitatively constrained: It inhibits unique ground-state selection and stabilizes a local distribution within the degenerate manifold, yielding continuum-like spectra that necessitate a critical reevaluation of the experimental signatures of exotic quantum states.
Qin, T. Y.*; Hu, F. F.*; 徐 平光; Zhang, R.*; Su, Y. H.; Ao, N.*; Li, Z. W.*; 篠原 武尚; 菖蒲 敬久; Wu, S. C.*
International Journal of Fatigue, 202, p.109233_1 - 109233_16, 2026/01
被引用回数：5 パーセンタイル：73.62(Engineering, Mechanical)The surface induction-hardened S38C medium carbon steel shows a good balance of strength and toughness, but complicates the evaluation of fatigue resistance, mainly because of gradient residual stress (RS) and grains. An integrated fatigue resistance assessment (AIFA) framework was proposed to consider the residual stress relief under stochastic loads. To this end, quasi-in situ neutron diffraction and Bragg-edge imaging were combined to probe the evolution of residual stress during crack propagation. Firstly, a rigid-flexible coupled vehicle dynamics model was adopted to obtain the time-domain variable amplitude loading spectrum. Then, Fortran subroutines were developed to assign these data into full-scale S38C axle model, and the remaining life was predicted using the damage tolerance approach. The results demonstrate that crack propagation would accelerate when residual stress is considered in the case of the crack depth exceeding 3.0 mm. It is, for the first time, found that 15 mm- and 5 mm-thickness fan-shaped specimens can retain the axial and hoop residual strain in terms of diffraction angle variation, respectively, for full-scale structural S38C steel axles. In the absence of RS, the remaining life of the axle decreases sharply from 624,800 to 51,300 km as the crack depth increases from 3.0 to 16 mm. Compared with the standard method under constant amplitude loading without residual stress relief, the present AIFA method provides the more accurate but conservative fatigue life prediction.
Lin, Z. M.*; Liu, B. X.*; Ming, K. S.*; 徐 平光; Yin, F. X.*; Zheng, S. J.*
Scripta Materialia, 263, p.116692_1 - 116692_7, 2025/07
被引用回数：3 パーセンタイル：60.79(Nanoscience & Nanotechnology)Complementary layer thickness effects on strength and plasticity in Q235 and SUS304 steels provide a novel strategy to realize high strength and high plasticity of heterogeneous Q235/SUS304 multilayered steel. In this work, the tensile deformation behaviors and fracture characteristics of vacuum hot-rolled Q235/SUS304 multilayered steel with various layer thicknesses ranging from 223 
m to 5 m were deeply investigated. The tensile strength improved with the reduction of layer thickness, and the uniform elongation were first increasing and then decreasing with the decrease of layer thickness, and the peak value appeared at the layer thickness of 20 m. Interestingly, the fracture elongation forms a high plateau value within the 10
20 m range. Further analysis reveals that the severe strain localization in the brittle SUS304 thin layers is delayed by the ductile Q235 layers, which is mainly attributed to the different texture evolution and dislocation configuration characteristics during tensile deformation.
伊東 達矢; Xu, S.*; Xu, X.*; 大森 俊洋*; 貝沼 亮介*
Shape Memory and Superelasticity, 11(2), p.167 - 175, 2025/06
The microstructure, crystal structures, cold workability, and martensitic transformation temperatures of several Cu
Mn
Al
(40 
55; 10 
13; at%) alloys were analyzed. For the first time, martensitic transformation was revealed Mn-rich Cu-Mn-Al alloys. The surface relief of the martensite phase reversibly appeared and disappeared during cooling and heating, along with small thermal hysteresis, implying a thermoelastic transformation. The crystal structures of the parent and martensite phases are B2 and 2M(BCT), respectively, with c
Mn
Al (at%) sample. This alloy demonstrates moderate cold workability and cost-effectiveness, exhibiting potential as an alternative for conventional shape memory alloys in various applications.
友田 陽*; Harjo, S.; 徐 平光; 諸岡 聡; Gong, W.; Wang, Y.*
Metals, 15(6), p.610_1 - 610_19, 2025/05
被引用回数：4 パーセンタイル：35.62(Materials Science, Multidisciplinary)Lattice parameters of product and matrix phases in steels have been measured using in situ X-ray and neutron diffraction during forward and reverse transformations. These parameters are influenced by temperature, transformation-induced internal stresses, alloying element partitioning, crystal defects, and magnetic strains. Disentangling these contributions is essential for understanding lattice behavior. This review explores internal strain (stress) associated with ferrite, pearlite, bainite, martensite, and reverse austenite transformations, emphasizing the distinction between diffusional and displacive mechanisms. It also examines how plastic deformation of austenite affects subsequent bainite or martensite formation. The roles of dislocations and vacancies are identified as critical areas for further research.
Hu, F.-F.*; Qin, T.-Y.*; Ao, N.*; 徐 平光; Su, Y. H.; Parker, J. D.*; 篠原 武尚; 菖蒲 敬久; Kang, G.-Z.*; Ren, M.-M.; et al.
Journal of Traffic and Transportation Engineering, 25(2), p.75 - 93, 2025/04
To accurately predict the remaining lifetime of surface-strengthened railway axles, a damage tolerance method considering three-dimensional (3D) residual stresses was proposed. By taking the induction-hardened carbon steel S38C axle as an example, two-dimensional (2D) distribution characterization of residual strain and 3D residual stress measurement were performed through comprehensive application of the neutron Bragg-edge transmission imaging and angle-dispersive neutron diffraction experiments. A numerical method was employed to implant the 3D residual stress into the axle model, and the remaining lifetime of the full-scale axle was studied by coupling the measured load spectrum, press-fit loads, and residual stresses. Experimental results shows that, both axial and hoop directions present a compressive residual strain gradient layer of about 3 mm, with a maximum compressive residual strain of up to -4500 
in the surface layer, yet a maximum tensile strain of up to 1000 in the core. The maximum axial and hoop compressive stresses of the axle are about -500 MPa and -303 MPa respectively, while radial stresses overall fluctuate in the zero mean stress range. At depths beyond 4.5 mm from the surface layer, all three components are tensile stresses. The axle surface layer is subjected to compressive residual stresses, and crack propagation does not occur if the crack depth is less than 4.5 mm. Nevertheless, cracks propagate accelerates when the crack depth is greater than 4.5 mm. Different crack propagation depth thresholds lead to a larger calculated remaining lifetime for the residual stress-free condition than for the case where 3D residual stresses are taken into account. However, the axle remaining service mileage of the axle of 227000 Km under the most conservative conditions exceeds 3.5 non-destructive inspection (NDI) cycles, with a large safety margin. The experimental results can provide a scientific reference for the development and optimization of NDI cycles for surface-strengthened railway axles.
Xu, J.*; Lang, P.*; Liang, S.*; Zhang, J.*; Fei, Y.*; Wang, Y.*; Gao, D.*; 服部 高典; 阿部 淳*; Dong, X.*; et al.
Journal of Physical Chemistry Letters (Internet), 16(10), p.2445 - 2451, 2025/03
被引用回数：3 パーセンタイル：72.83(Chemistry, Physical)アルダー-エン反応は、アルケンとアリル水素との化学反応であり、C-C結合を構築する効率的な方法である。従来、この反応には触媒、高温、あるいは光触媒が必要であった。本研究では、触媒を用いずに室温下で加圧することで成功した1-ヘキセンのアルダー-エン反応を報告する。1-ヘキセンは4.3GPaで結晶化し、18GPaで重合してオレフィンを形成する。ガスクロマトグラフィー-質量分析法により、1-ヘキセンが高圧下でのアルダー-エン反応により二量体を生成することを発見した。その場中性子回折から、この反応過程はトポケミカル則に従わないことがわかった。理論計算により、1つのC-H 
結合と2つのアルケン
結合を含む6員環遷移状態が示され、そのエネルギーは20GPaまで圧縮すると明らかに減少した。本研究は、触媒を用いずに室温でアルダー-エン反応を実現する新規かつ有望な方法を提供し、この重要な反応の応用を拡大するものである。
Song, Y.*; Xu, S.*; 佐藤 駿介*; Lee, I.*; Xu, X.*; 大森 俊洋*; 長迫 実*; 川崎 卓郎; 鬼柳 亮嗣; Harjo, S.; et al.
Nature, 638, p.965 - 971, 2025/02
被引用回数：54 パーセンタイル：99.33(Multidisciplinary Sciences)In advanced applications like aerospace and space exploration, materials must balance lightness, functionality, and extreme thermal fluctuation resistance. Shape-memory alloys show promise with strength, toughness, and substantial strain recovery due to superelasticity, but maintaining low mass and effective operation at cryogenic temperatures is challenging. We hereby introduce a novel shape-memory alloy that adheres to these stringent criteria. Predominantly composed of Ti and Al with a chemical composition of Ti
Al
Cr
, this alloy 25 is characterized by a low density (4.36
10
kg/m) and a high specific strength (18510 Pa
m/kg) at room temperature, while exhibiting excellent superelasticity. The superelasticity, owing to a reversible stress-induced phase transformation from an ordered body-centered cubic parent phase to an ordered orthorhombic martensite, allows for a recoverable strain exceeding 7%. Remarkably, this functionality persists across a broad range of temperatures, from deep cryogenic 4.2 K to above room temperature, arising from an unconventional temperature dependence of transformation stresses. Below a certain threshold during cooling, the critical transformation stress inversely correlates with temperature. We interpret this behavior from the perspective of a temperature-dependent anomalous lattice instability of the parent phase. This alloy holds potential in everyday appliances requiring flexible strain accommodations, as well as components designed for extreme environmental conditions such as deep space and liquefied gases.
Hu, F. F.*; Qin, T. Y.*; Ao, N.*; Su, Y. H.; Zhou, L.*; 徐 平光; Parker, J. D.*; 篠原 武尚; Chen, J.*; Wu, S. C.*
Engineering Fracture Mechanics, 306, p.110267_1 - 110267_18, 2024/08
被引用回数：5 パーセンタイル：45.58(Mechanics)Non-destructive and quantitative mapping of gradient residual strain distribution in surface-hardened railway S38C axles could provide a positive reference for determining service lifetime and maintenance strategy. To tackle this concern, time-of-flight neutron Bragg-edge transmission imaging was employed by real axle samples with and without impacted crater. A novel and simple procedure to formulate the residual strain field was also developed in this work, with the transmission batch code in Appendix A. By mapping the global two- dimensional residual strains, it can be verified that the residual strains into the axle are uniformly distributed in the hoop direction. Subsequently, it was revealed that the axial and hoop residual strains, respectively in the cylinder and the long strip samples prepared from a real S38C hollow axle, indicated a gradient evolution distribution with a depth of 8 mm, covering a range of -5500 1000 for axial strains and -6500 1000 for hoop strains. More importantly, the maximum compressive lattice strain of the cylinder sample was increased by 15.61%, and 22.35% at the impacting speeds of 100, and 125 m/s, respectively; and that of the long strip sample increased by 29.17%, and 43.70%, respectively. It can thus be concluded that lattice strains have redistributed around the impact crater, demonstrating the local alteration of the residual strain field. These new findings suggest the localized variation in residual strains should be taken into account while evaluating the service damage evolution of railway axles, especially those affected by high-speed impacts during operation.
Qin, T. Y.*; Hu, F. F.*; 徐 平光; Zhang, H.*; Zhou, L.*; Ao, N.*; Su, Y. H.; 菖蒲 敬久; Wu, S. C.*
International Journal of Fatigue, 185, p.108336_1 - 108336_13, 2024/08
被引用回数：20 パーセンタイル：88.51(Engineering, Mechanical)Gradient distribution of triaxial residual stresses to a depth of several millimeters is retained in middle carbon steel S38C axles after high-frequency induction hardening, which has become a critical concern for fatigue structural integrity. To address this, the axial, hoop, and radial gradient residual strains inside the axles were measured for the first time by advanced neutron diffraction. The SIGINI Fortran subroutine was then adopted to reconstruct the global initial residual stress field from the measured data. Experimental and simulation results show that residual stresses of about -520 MPa (axial), -710 MPa (hoop), and -40 MPa (radial) residual stress were retained below the axle surface. Subsequently, the fatigue crack propagation behavior of S38C axles was numerically investigated in the framework of fracture mechanics. The calculated results clearly show that the compressive residual stresses at a depth of 0?3 mm from the axle surface lead to a low crack growth driving force, and that fatigue cracks do not propagate as long as the crack depth is less than 3.7 mm for hollow S38C axles. These results further indicate that the maximum defect size allowed in routine inspections is acceptable from a safety and economic point of view. Accurate measurement and characterization of the global gradient residual stress field through experiments and simulations can provide an important reference for optimizing the mileage intervals of nondestructive testing (NDT) of surface defects in these surface-strengthened railway axles.
Zhou, L.*; Zhang, H.*; Qin, T. Y.*; Hu, F. F.*; 徐 平光; Ao, N.*; Su, Y. H.; He, L. H.*; Li, X. H.*; Zhang, J. R.*; et al.
Metallurgical and Materials Transactions A, 55(7), p.2175 - 2185, 2024/07
被引用回数：4 パーセンタイル：38.96(Materials Science, Multidisciplinary)High-speed railway S38C axles undergo surface induction hardening for durability, but are susceptible to fatigue cracks from foreign object impact. The neutron diffraction method was employed to measure the residual strain in S38C axles, obtaining microscopic lattice distortion data, for the gradient layer at a depth of 8 mm under the surface. The results showed that after induction-hardening, the microscopic lattice distortion had a gradient distribution, decreasing with the distance from the surface. However, in the case of impacting speed of 600 km/m, the average microscopic lattice distortion increased with the distance from the surface, reaching a maximum augmentation of 55 pct. These findings indicate a strong experimental basis, and improve our understanding of the relationship between macroscopic residual stress and decision-making, in regard to operation and maintenance.
Liao, J.*; Huang, Z.*; Shangguan, Y.*; Zhang, B.*; Cheng, S.*; Xu, H.*; 梶本 亮一; 蒲沢 和也*; Bao, S.*; Wen, J.*
Physical Review B, 109(22), p.224411_1 - 224411_10, 2024/06
被引用回数：4 パーセンタイル：32.00(Materials Science, Multidisciplinary)Antiferromagnetic van der Waals family 
P
( = Fe, Mn, Co, and Ni; 
= S and Se) have attracted significant research attention due to the possibility of realizing long-range magnetic order down to the monolayer limit. Here, we perform inelastic neutron scattering measurements on single-crystal samples of MnPSe, a member of the P family, to study the spin dynamics and determine the effective spin model. The excited magnon bands are well characterized by a spin model, which includes a Heisenberg term with three intraplane exchange parameters (
meV, 
meV, 
meV) and one interplane parameter (
meV), and an easy-plane single-ion anisotropy term (
meV). Additionally, we observe the intersection of the magnon and phonon bands but no anomalous spectral features induced by the formation of magnon-phonon hybrid excitations at the intersecting region. We discuss possible reasons for the absence of such hybrid excitations in MnPSe.
Mg; Bridging the 
and 
islands of inversionMadurga, M.*; Christie, J. M.*; Xu, Z.*; Grzywacz, R.*; Poves, A.*; King, T.*; Allmond, J. M.*; Chester, A.*; Cox, I.*; Farr, J.*; et al.
Physical Review C, 109(6), p.L061301_1 - L061301_6, 2024/06
被引用回数：4 パーセンタイル：64.34(Physics, Nuclear)ミシガン州立大学の国立超伝導サイクロトロン研究所にて
Caからのフラグメンテーション反応によって中性子過剰核Mgを生成、分離し、そのアイソマーを探した。その結果、168keVのガンマ線を出して
に半減期約90nsで脱励起するアイソマーを発見した。その性質を議論するため、大規模殻模型計算の結果と比較した。Mg同位体では中性子数20から28領域にかけて広く変形核となることが知られているが、理論的には、前者の領域は
殻から2個の中性子が励起することによって変形し、後者の領域は中性子数28の殻ギャップからの中性子励起によって変形する。Mgはその中間に位置し、両者の状態が近くに存在することで、励起エネルギーの低い
が出現すると理解される。
complex exhibiting intermolecular proton shifting coupled spin transitionJi, T.*; Su, S.*; Wu, S.*; 堀 優太*; 重田 育照*; Huang, Y.*; Zheng, W.*; Xu, W.*; Zhang, X.*; 鬼柳 亮嗣; et al.
Angewandte Chemie; International Edition, 63(25), p.e202404843_1 - e202404843_6, 2024/04
被引用回数：4 パーセンタイル：35.29(Chemistry, Multidisciplinary)In this study, we investigated reversible intermolecular proton shifting (IPS) coupled with spin transition (ST) in a novel Fe complex. The host Fe complex and the guest carboxylic acid anion were connected by intermolecular hydrogen bonds (IHBs). We extended the intramolecular proton transfer coupled ST phenomenon to the intermolecular system. The dynamic phenomenon was confirmed by variable-temperature single-crystal X-ray diffraction, neutron crystallography, and infrared spectroscopy.
Liss, K.-D.*; Han, J.-K.*; Blankenburg, M.*; Lienert, U.*; Harjo, S.; 川崎 卓郎; 徐 平光; 行武 栄太郎*; Kawasaki, M.*
Journal of Materials Science, 59(14), p.5831 - 5853, 2024/04
被引用回数：13 パーセンタイル：75.01(Materials Science, Multidisciplinary)The magnesium alloy AZ31, which has undergone high-pressure torsion processing, was subjected to in situ annealing micro-beam synchrotron high-energy X-ray diffraction and compared to the as-received rolled sheet material that was investigated through in situ neutron diffraction. While the latter only exhibits thermal expansion and minor recovery, the nanostructured specimen displays a complex evolution, including recovery, strong recrystallization, phase transformations, and various regimes of grain growth. Nanometer-scale grain sizes, determined using Williamson-Hall analysis, exhibit seamless growth, aligning with the transition to larger grains, as assessed through the occupancy of single grain reflections on the diffraction rings. The study uncovers strain anomalies resulting from thermal expansion, segregation of Al atoms, and the kinetics of vacancy creation and annihilation. Notably, a substantial number of excess vacancies were generated through high-pressure torsion, and maintained for driving the recrystallization and forming highly activated volumes for diffusion and phase precipitation during heating. The unsystematic scatter observed in the Williamson-Hall plot indicates high dislocation densities following severe plastic deformation, which significantly decreases during recrystallization. Subsequently, dislocations reappear during grain growth, likely in response to torque gradients in larger grains. It is worth noting that the characteristics of unsystematic scatter differ for dislocations created at high and low temperatures, underscoring the strong temperature dependence of slip system activation.
Linh, B. D.*; Corsi, A.*; Gillibert, A.*; Obertelli, A.*; Doornenbal, P.*; Barbieri, C.*; Duguet, T.*; G
mez-Ramos, M.*; Holt, J. D.*; Hu, B. S.*; et al.
Physical Review C, 109(3), p.034312_1 - 034312_15, 2024/03
被引用回数：6 パーセンタイル：78.06(Physics, Nuclear)理化学研究所RIビームファクトリーにて中性子過剰核
Arビームからの1中性子ノックアウト反応実験を行い、
Arのエネルギー準位および分光学的因子を導出した。特に、第一励起状態の
への分光学的因子が大きいことから、始状態のArの基底状態において中性子が
軌道を多く占めていることがわかった。これは、中性子数32がよい魔法数として知られる
Caとは異なった性質であり、カルシウムからアルゴンへと陽子が2個減ることで閉殻構造が大きく崩れることが明らかになった。
Liss, K.-D.*; 徐 平光; 城 鮎美*; Zhang, S. Y.*; 行武 栄太郎*; 菖蒲 敬久; 秋田 貢一*
Advanced Engineering Materials, 26(4), p.202300470_1 - 202300470_9, 2024/02
被引用回数：10 パーセンタイル：52.92(Materials Science, Multidisciplinary)In polycrystals, grains with certain orientations grow at high temperatures at the expense of grains with other unfavorable orientations. Grain growth involves a variety of situations and mechanisms that make experimental study, modeling, and understanding extremely complex. Normal grain growth occurs in a self-similar manner, with curved grain boundaries serving as the driving force and a parabolic growth law that scales up the grain size by the square root of time. More complex growth forms include boundary pinning of precipitates and other boundaries, topological transitions that alter driving forces, grain coalescence and anomalous grain growth, but these are considered "erratic" and their initiation is an open question in modern research, without a simple experimental approach on how they should be studied. Here, we show that grain rotation upon coalescence is spontaneously activated between one grain and a favorable neighbor, through the necessary diffusive mass transport at further boundaries of the same grain leading to their activation and a competitive "erratic" reorientation in a zigzag way, while other grains in the matrix remain stable. After two grains have eventually coalesced, their surrounding boundaries are still activated leading to further rotation and growth, filling the missing puzzle stone in thermodynamic theory between normal and abnormal growth, the latter stating that abnormal growth only takes place when the size of the growing grain is already large. Prerequisites and postulates of abnormal grain growth are based on advantageous texture, grain boundary mobility, enhanced diffusion kinetics and coalescence, which can be well explained by our observations. Moreover, our observations have been enabled through a novel experimental approach using the white-beam X-ray Laue diffraction method in bulk transmission mode on a polycrystalline.
R
hm, W.*; 伴 信彦*; Chen, J.*; Li, C.*; Dobynde, M.*; Durante, M.*; El-Jaby, S.*; 込山 立人*; 小笹 晃太郎*; 佐藤 達彦; et al.
Journal of Medical Physics - Zeitschrift fr medizinische Physik -, 34(1), p.4 - 13, 2024/02
国際放射線防護委員会(ICRP)は、過去90年間に渡って世界各国や国際的な放射線防護の枠組み作りに貢献してきた。2019年、ICRPは宇宙飛行士の放射線防護に関わる様々な問題に対応したタスクグループ(TG115)を立ち上げ、地上の放射線防護体系と宇宙の放射線防護体系との共通の枠組み作りに取り組んでいる。本論文では、現時点でICRPが定めている宇宙放射線防護体系についてとりまとめて報告する。
