Refine your search:     
Report No.
 - 
Search Results: Records 1-20 displayed on this page of 78

Presentation/Publication Type

Initialising ...

Refine

Journal/Book Title

Initialising ...

Meeting title

Initialising ...

First Author

Initialising ...

Keyword

Initialising ...

Language

Initialising ...

Publication Year

Initialising ...

Held year of conference

Initialising ...

Save select records

JAEA Reports

The Laboratory Operation Based on ISO/IEC 17025; Radioactivity analysis of environmental samples by germanium semiconductor detectors

Urushidate, Tadayuki*; Yoda, Tomoyuki; Otani, Shuichi*; Yamaguchi, Toshio*; Kunii, Nobuaki*; Kuriki, Kazuki*; Fujiwara, Kenso; Niizato, Tadafumi; Kitamura, Akihiro; Iijima, Kazuki

JAEA-Review 2022-023, 8 Pages, 2022/09

JAEA-Review-2022-023.pdf:1.19MB

After the accident of the Fukushima Daiichi Nuclear Power Station, the Japan Atomic Energy Agency has newly set up a laboratory in Fukushima and started measuring radioactivity concentrations of environmental samples. In October 2015, Fukushima Radiation Measurement Group has been accredited the ISO/IEC 17025 standard by the Japan Accreditation Board (JAB) as a testing laboratory for radioactivity analysis ($$^{134}$$Cs, $$^{137}$$Cs) based on Gamma-ray spectrometry with germanium semiconductor detectors. The laboratory has measured approximately 60,000 of various environmental samples at the end of March 2022. The laboratory quality control and measurement techniques have been accredited by regular surveillance of JAB. In September 2019, the laboratory renewed accreditation as a testing laboratory for radioactivity analysis.

Journal Articles

Failure estimation methods for steam generator tubes with wall-thinning or crack

Yamaguchi, Yoshihito; Mano, Akihiro; Li, Y.

Proceedings of ASME 2022 Pressure Vessels and Piping Conference (PVP 2022) (Internet), 10 Pages, 2022/07

The steam generator (SG) tube is one of the important components in pressurized water reactors. Flaws such as wall-thinning or stress corrosion cracking have been reported in SG tubes. The burst pressure where both the internal and external pressures from the primary and secondary coolant systems are considered must be predicted to assess the structural integrity of SG tubes. Burst tests were performed by various organizations. On the basis of the test results, failure estimation methods were proposed. In this study, previous burst test data and existing failure estimation methods for SG tubes with wall-thinning or crack were investigated. As a result, the coefficient of the existing estimation method for SG tube with uniform wall-thinning was updated. In addition, failure estimation methods that are suitable for SG tubes with crack or local wall-thinning were proposed by considering the effects of the flaw shape and size on the burst pressure. The applicability of the failure estimation methods was confirmed by comparing the predicted results with the burst test data in actual SG tubes.

Journal Articles

Improvement of probabilistic fracture mechanics analysis code PASCAL-SP regarding stress corrosion cracking in nickel based alloy weld joint of piping system in boiling water reactor

Mano, Akihiro; Yamaguchi, Yoshihito; Katsuyama, Jinya; Li, Y.

Journal of Pressure Vessel Technology, 144(1), p.011506_1 - 011506_9, 2022/02

 Times Cited Count:1 Percentile:22.02(Engineering, Mechanical)

In the past few decades, the cracks because of stress corrosion cracking (SCC) have been detected in the dissimilar weld joints welded using nickel based alloy in piping system of boiling water reactors. Thus, the structural integrity assessment for such weld joints has become important. Nowadays, probabilistic fracture mechanics (PFM) analysis is recognized as a rational method for structural integrity assessment because it can consider inherent uncertainties of various influencing factors as probability distributions and quantitatively evaluate the failure probability of a cracked component. The Japan Atomic Energy Agency has developed a PFM analysis code PASCAL-SP for a probabilistic structural integrity assessment of weld joint in pipe in nuclear power plant. This study improves the analysis functions of PASCAL-SP for weld joint welded using nickel based alloy in boiling water reactor susceptible to SCC. As an analysis example of the improved version of PASCAL-SP, the failure probability of a weld joint is quantitatively evaluated. Furthermore, sensitivity analyses are conducted concerning the effect of leak detection and in-service inspection. From the analysis results, it is concluded that the improved version of PASCAL-SP is useful for structural integrity assessment.

Journal Articles

A Novel method to uniquely determine the parameters in Gurson-Tvergaard-Needleman model

Zhang, T.; Lu, K.; Mano, Akihiro; Yamaguchi, Yoshihito; Katsuyama, Jinya; Li, Y.

Fatigue & Fracture of Engineering Materials & Structures, 44(12), p.3399 - 3415, 2021/12

 Times Cited Count:8 Percentile:82.96(Engineering, Mechanical)

The Gurson-Tvergaard-Needleman (GTN) model is considered a promising approach in failure prediction as it takes the micromechanical behavior of ductile metals into consideration and its function exhibits a relatively clear physical meaning. Although the GTN model has been widely investigated in the past decades, its engineering applications have scarcely progressed due to the difficulty in determining the eight strongly coupled parameters. Based on the physical background of GTN model, a set of methods was established to determine the parameters in the GTN model. The knowledge of continuum damage mechanics was used to experimentally determine the development of void volume fraction through the variation of effective Young's modulus in a uniaxial tensile test, and three parameters regarding void nucleation were analytically derived using a newly established method. Other parameters in the GTN model were also uniquely determined through a joint use of the chemical composition analysis (for the initial void volume fraction), the cell model analyses (for the two constitutive parameters), and the inverse finite element method (for the two failure parameters). The reliability of this novel parameter determination method was verified through the failure prediction of both cracked and uncracked specimens of carbon steel STPT410.

JAEA Reports

User's manual and analysis methodology of probabilistic fracture mechanics analysis code PASCAL-SP Ver. 2 for piping (Contract research)

Yamaguchi, Yoshihito; Mano, Akihiro; Katsuyama, Jinya; Masaki, Koichi*; Miyamoto, Yuhei*; Li, Y.

JAEA-Data/Code 2020-021, 176 Pages, 2021/02

JAEA-Data-Code-2020-021.pdf:5.26MB

In Japan Atomic Energy Agency, as a part of researches on the structural integrity assessment and seismic safety assessment of aged components in nuclear power plants, a probabilistic fracture mechanics (PFM) analysis code PASCAL-SP (PFM Analysis of Structural Components in Aging LWR - Stress Corrosion Cracking at Welded Joints of Piping) has been developed to evaluate failure probability of piping. The initial version was released in 2010, and after that, the evaluation targets have been expanded and analysis functions have been improved based on the state-of-the art technology. Now, it is released as Ver. 2.0. In the latest version, primary water stress corrosion cracking in the environment of Pressurized Water Reactor, nickel based alloy stress corrosion cracking in the environment of Boiling Water Reactor, and thermal embrittlement can be taken into account as target age-related degradation. Also, many analysis functions have been improved such as incorporations of the latest stress intensity factor solutions and uncertainty evaluation model of weld residual stress. Moreover, seismic fragility evaluation function has been developed by introducing evaluation methods including crack growth analysis model considering excessive cyclic loading due to large earthquake. Furthermore, confidence level evaluation function has been incorporated by considering the epistemic and aleatory uncertainties related to influence parameters in the probabilistic evaluation. This report provides the user's manual and analysis methodology of PASCAL-SP Ver. 2.0.

JAEA Reports

Status of study of long-term assessment of transport of radioactive contaminants in the environment of Fukushima (FY2018) (Translated document)

Nagao, Fumiya; Niizato, Tadafumi; Sasaki, Yoshito; Ito, Satomi; Watanabe, Takayoshi; Dohi, Terumi; Nakanishi, Takahiro; Sakuma, Kazuyuki; Hagiwara, Hiroki; Funaki, Hironori; et al.

JAEA-Research 2020-007, 249 Pages, 2020/10

JAEA-Research-2020-007.pdf:15.83MB

The accident of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. occurred due to the Great East Japan Earthquake, Sanriku offshore earthquake, of 9.0 magnitude and the accompanying tsunami. As a result, large amount of radioactive materials was released into the environment. Under these circumstances, Japan Atomic Energy Agency (JAEA) has been conducting "Long-term Assessment of Transport of Radioactive Contaminants in the Environment of Fukushima" concerning radioactive materials released in environment, especially migration behavior of radioactive cesium since November 2012. This report is a summary of the research results that have been obtained in environmental dynamics research conducted by JAEA in Fukushima Prefecture.

Journal Articles

A New probabilistic evaluation model for weld residual stress

Mano, Akihiro; Katsuyama, Jinya; Miyamoto, Yuhei*; Yamaguchi, Yoshihito; Li, Y.

International Journal of Pressure Vessels and Piping, 179, p.103945_1 - 103945_6, 2020/01

 Times Cited Count:1 Percentile:12.66(Engineering, Multidisciplinary)

Weld residual stress (WRS) is one of the most important factors in the structural integrity assessment of piping welds, and it is considered a driving force for crack growth. It is characterized by large uncertainty. For more rational assessment, it is important to consider the uncertainty of WRS for evaluating crack growth behavior in probabilistic fracture mechanics (PFM) analysis. In existing PFM analysis codes, WRS uncertainty is set by statistically processing the results of multiple finite element analyses. This process depends on the individual performing PFM analysis, which may lead to uncertainties whose sources would be different from the original WRS. In this study, we developed a new WRS evaluation model based on Fourier transformation, and the model was incorporated into PASCAL-SP, which has been developed by Japan Atomic Energy Agency. Through improvements to the code, WRS uncertainty can be considered automatically and appropriately by inputting multiple WRS analysis results directly as input data for PFM analysis.

JAEA Reports

Status of study of long-term assessment of transport of radioactive contaminants in the environment of Fukushima (FY2018)

Nagao, Fumiya; Niizato, Tadafumi; Sasaki, Yoshito; Ito, Satomi; Watanabe, Takayoshi; Dohi, Terumi; Nakanishi, Takahiro; Sakuma, Kazuyuki; Hagiwara, Hiroki; Funaki, Hironori; et al.

JAEA-Research 2019-002, 235 Pages, 2019/08

JAEA-Research-2019-002.pdf:21.04MB

The accident of the Fukushima Daiichi Nuclear Power Station (hereinafter referred to 1F), Tokyo Electric Power Company Holdings, Inc. occurred due to the Great East Japan Earthquake, Sanriku offshore earthquake, of 9.0 magnitude and the accompanying tsunami. As a result, large amount of radioactive materials was released into the environment. Under these circumstances, JAEA has been conducting Long-term Environmental Dynamics Research concerning radioactive materials released in environment, especially migration behavior of radioactive cesium since November 2012. This report is a summary of the research results that have been obtained in environmental dynamics research conducted by JAEA in Fukushima Prefecture.

Journal Articles

Improvement of probabilistic fracture mechanics analysis code PASCAL-SP with regard to PWSCC

Mano, Akihiro; Yamaguchi, Yoshihito; Katsuyama, Jinya; Li, Y.

Journal of Nuclear Engineering and Radiation Science, 5(3), p.031505_1 - 031505_8, 2019/07

Probabilistic fracture mechanics (PFM) analysis is expected as a rational method for the structural integrity assessment because it can consider the uncertainties of various influence factors and can evaluate the quantitative value such as failure probability of a cracked component as the solution. In the Japan Atomic Energy Agency, a PFM analysis code PASCAL-SP has been developed for the structural integrity assessment of piping welds in nuclear power plants. In the latest few decades, a number of cracks due to primary water stress corrosion cracking (PWSCC) have been detected in the nickel-based alloy welds in the primary piping of pressurized water reactors (PWRs). Thus the structural integrity assessment taking account of PWSCC has become important. In this paper, we improved PASCAL-SP for the assessment considering PWSCC by introducing the several analytical functions such as the evaluation models of crack initiation time, crack growth rate and probability of crack detection. By using improved PASCAL-SP, the failure probabilities of pipes with a circumferential crack or an axial crack due to PWSCC were evaluated as numerical examples. We also evaluated the influence of a leak detection and a non-destructive examination on the failure probabilities. On the basis of the numerical results, we concluded that the improved PASCAL-SP is useful for evaluating the failure probability of pipe taking PWSCC into account.

Journal Articles

Development of semi-implicit particle method for simulating sodium-water chemical reaction

Li, J.*; Jang, S.*; Yamaguchi, Akira*; Uchibori, Akihiro; Takata, Takashi; Ohshima, Hiroyuki

Proceedings of 11th Korea-Japan Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS-11) (Internet), 4 Pages, 2018/11

The sodium-water reaction model is developed in particle methods. Two chemical reaction model, called surface reaction model and gas-phase reaction model are developed in the particle method. Validation on the case of vapor injection into liquid water is conducted and good consistency of jet velocity evolution along jet trajectory is obtained. Finally, sodium-water chemical reaction in a configuration of multiple tube bundles is simulated. Jet velocity, water vapor fraction and temperature are investigated and reasonable results are observed, which presents promising future of this methodology.

Journal Articles

An Application of the probabilistic fracture mechanics code PASCAL-SP to risk informed in-service inspection for piping

Mano, Akihiro; Yamaguchi, Yoshihito; Katsuyama, Jinya; Li, Y.

Proceedings of Asian Symposium on Risk Assessment and Management 2017 (ASRAM 2017) (USB Flash Drive), 12 Pages, 2017/11

As a rational inspection methodology, risk informed in-service inspection (RI-ISI) has been widely utilized in in-service inspections of nuclear power plants (NPPs) in several countries. In some of NPPs, an RI-ISI methodology developed by Westinghouse Owners Group (WOG) was applied. As a part of RI-ISI process, extent of examination for important piping segments are determined through the comparisons of leak frequencies with its target value based on the industrial piping leak experiences. The leak frequencies for segments are used as a numerical factor for planning examination based on WOG methodology, and can be evaluated through analyses on the basis of probabilistic fracture mechanics (PFM). In Japan Atomic Energy Agency (JAEA), we have developed a PFM analysis code PASCAL-SP for evaluating leak and rupture probabilities or frequencies of welds in piping of light water reactors taking crack initiation and propagation due to aging degradation mechanisms such as fatigue into consideration. Also, evaluation models of probability of crack detection by non-destructive examination considering the crack type, crack depth and performance of examination team is incorporated in PASCAL-SP. In this study, we investigated the applicability of PASCAL-SP into planning of examination considering the effects of repair methodology, performance of inspection team, and examination time. On the basis of analysis results, it was found that examination plans can be reasonably determined by using PASCAL-SP under several conditions, and it was concluded that the PFM is very effective tools in RI-ISI.

Journal Articles

Improvement of probabilistic fracture mechanics analysis code PASCAL-SP with regard to primary water stress corrosion cracking

Mano, Akihiro; Yamaguchi, Yoshihito; Katsuyama, Jinya; Li, Y.

Proceedings of 25th International Conference on Nuclear Engineering (ICONE-25) (CD-ROM), 7 Pages, 2017/07

Recently, cracks due to primary water stress corrosion cracking (PWSCC) have been detected in nickel based alloy welds in the primary piping of pressurized water reactors. Structural integrity assessments taking PWSCC into account have become important. Probabilistic fracture mechanics (PFM) is expected as one of rational methods for the assessments because it can account for uncertainty of the influencing factors and evaluate the failure probabilities of components. In JAEA, a PFM analysis code PASCAL-SP was developed to evaluate the failure probability of nuclear pipe. This paper details improvement of the PASCAL-SP to evaluate the failure probability taking PWSCC into account. As numerical examples, the failure probabilities for circumferential and axial cracks due to PWSCC are evaluated. Influence of inspection on failure probabilities are evaluated. As the results, we conclude that the improved PASCAL-SP is useful for evaluating the failure probability taking PWSCC into account.

Journal Articles

NiO/Nb$$_{2}$$O$$_{5}$$/C hydrazine electrooxidation catalysts for anion exchange membrane fuel cells

Sakamoto, Tomokazu*; Masuda, Teruyuki*; Yoshimoto, Koji*; Kishi, Hirofumi*; Yamaguchi, Susumu*; Matsumura, Daiju; Tamura, Kazuhisa; Hori, Akihiro*; Horiuchi, Yosuke*; Serov, A.*; et al.

Journal of the Electrochemical Society, 164(4), p.F229 - F234, 2017/01

 Times Cited Count:12 Percentile:40.97(Electrochemistry)

JAEA Reports

User manual of Soil and Cesium Transport (SACT), a program to predict long-term Cs distribution using USLE for soil erosion, transportation and deposition

Saito, Hiroshi; Yamaguchi, Masaaki; Kitamura, Akihiro

JAEA-Testing 2016-003, 68 Pages, 2016/12

JAEA-Testing-2016-003.pdf:6.4MB

JAEA has developed a simple and fast simulation program "SACT" (Soil and Cesium Transport) to predict a long-term distribution of Cs deposited on the land surface due to the Fukushima Daiichi Nuclear Power Station accident. It calculates soil movement (erosion, transportation, deposition) and Cs migration, and predicts its future distribution with the assumption that it is adhered to soil. SACT uses USLE (Universal Soil Loss Equation) for potential soil loss and simple equations for soil transportation and deposition. The Cs amount is predicted by the amount of soil movement and Cs concentration ratio for each grain-size of soil. SACT is characterized by its simplicity which enables fast calculation for wide area for long-term duration using existing equations. Data for parameters are widely available and site-specific calculations are possible using data of the targeted area. This manual provides useful and necessary information to users and facilitates the use of SACT widely.

Journal Articles

Study on self-wastage phenomenon at heat transfer tube in steam generator of sodium-cooled fast reactor with consideration of thermal coupling of fluid and structure

Kojima, Saori*; Uchibori, Akihiro; Takata, Takashi; Ohno, Shuji; Fukuda, Takeshi*; Yamaguchi, Akira*

Proceedings of 10th Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS-10) (USB Flash Drive), 8 Pages, 2016/11

Analytical evaluation on a self-wastage phenomenon at heat transfer tubes in the steam generator of sodium cooled fast reactors has been performed by using the sodium-water reaction analysis code SERAPHIM. In this study, a fluid-structure thermal coupling model was developed and incorporated in the SERAPHIM code to evaluate heat transfer between the sodium-side reacting flow and the outer surface of the heat transfer tube. The effect of the fluid-structure thermal coupling model on the temperature field was demonstrated through the numerical analyses.

Journal Articles

Mechanism study of hydrazine electrooxidation reaction on nickel oxide surface in alkaline electrolyte by in situ XAFS

Sakamoto, Tomokazu*; Kishi, Hirofumi*; Yamaguchi, Susumu*; Matsumura, Daiju; Tamura, Kazuhisa; Hori, Akihiro*; Horiuchi, Yosuke*; Serov, A.*; Artyushkova, K.*; Atanassov, P.*; et al.

Journal of the Electrochemical Society, 163(10), p.H951 - H957, 2016/08

 Times Cited Count:28 Percentile:76.71(Electrochemistry)

Journal Articles

Growth of single-phase nanostructured Er$$_2$$O$$_3$$ thin films on Si (100) by ion beam sputter deposition

Mao, W.*; Fujita, Masaya*; Chikada, Takumi*; Yamaguchi, Kenji; Suzuki, Akihiro*; Terai, Takayuki*; Matsuzaki, Hiroyuki*

Surface & Coatings Technology, 283, p.241 - 246, 2015/12

 Times Cited Count:3 Percentile:13.97(Materials Science, Coatings & Films)

Single-phase nanocrystalline thin films of Er$$_2$$O$$_3$$ (440) has been first prepared using Si (100) substrates by ion beam sputter deposition at 973 K at a pressure of $$<$$ 10$$^{-5}$$ Pa and $${it in}$$-$${it situ}$$ annealing at 1023 K at a pressure of $$approx$$ 10$$^{-7}$$ Pa. Er silicides formed during the deposition are eliminated via the annealing, which results in the single phase and the smooth surface of the Er$$_2$$O$$_3$$ thin films. The epitaxial relationship between Si (100) and Er$$_2$$O$$_3$$ (110) is clarified by X-ray diffraction and reflection high energy electron diffraction.

Journal Articles

Numerical investigation of self-wastage phenomena in steam generator of sodium-cooled fast reactor

Jang, S.*; Takata, Takashi; Yamaguchi, Akira*; Uchibori, Akihiro; Kurihara, Akikazu; Ohshima, Hiroyuki

Proceedings of 16th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-16) (USB Flash Drive), p.4275 - 4288, 2015/08

Numerical analysis of the self-wastage phenomenon was carried out using a multi-dimensional computational code called SERAPHIM. Several steps of numerical analysis were constructed to reproduce transient self-wastage phenomenon caused by Sodium Water Reaction (SWR). Numerical analysis of multiphase flow with chemical reaction near the initial crack is firstly performed. The wastage amount is evaluated based on hypothetical Arrhenius equation by using the temperature and molar concentration of sodium hydroxide. New analytical grid is created by exchanging the solid cells to fluid cells in the reaction based on the wastage amount evaluation. These series of procedure is repeated. The width and the shape of the enlarged crack showed good agreement with the experimental results.

Journal Articles

Sediment and $$^{137}$$Cs transport and accumulation in the Ogaki Dam of eastern Fukushima

Yamada, Susumu; Kitamura, Akihiro; Kurikami, Hiroshi; Yamaguchi, Masaaki; Malins, A.; Machida, Masahiko

Environmental Research Letters, 10(1), p.014013_1 - 014013_9, 2015/01

 Times Cited Count:24 Percentile:59.6(Environmental Sciences)

The Ogaki Dam Reservoir is one of the principal irrigation dam reservoirs in the Fukushima Prefecture and its upstream river basin was heavily contaminated by radioactivity from the Fukushima Daiichi Nuclear Power Plant accident. For the purpose of environmental assessment, it is important to determine the present condition of the water in the reservoir and to understand the behavior of sediment-sorbed radioactive cesium under different modes of operation of the dam. This paper addresses this issue with numerical simulations of fluvial processes in the reservoir using the 2D simulation code Nays2D. We present results for sediment deposition on the reservoir bed and the discharge via the dam under typical yearly flood conditions. The simulations show that almost all the sand and silt that enter into the reservoir deposit onto the reservoir bed. However, the locations where they tend to deposit differ, with sand tending to deposit close to the entrance of the reservoir, whereas silt deposits throughout the reservoir. Both sand and silt settle within a few hours of entering the reservoir. In contrast, clay remains suspended in the reservoir water for a period as long as several days, thus increasing the amount that is discharged downstream from the reservoir. Under the current operating mode of the dam, about three-quarters of clay that enters the reservoir during the flood is discharged downstream. By raising the height of the dam exit, the amount of clay exiting the reservoir can be reduced by a factor of three. The results indicate that the dam can be operated to buffer radioactive cesium and limit the contamination spreading into lowland areas of the Ukedo River basin. These results should be a factor in considerations for the future operation of the Ogaki Dam, and will be of interest for other operators of dam reservoirs in areas contaminated by radioactive fallout.

Journal Articles

Mathematical Modeling of Radioactive Contaminants in the Fukushima Environment

Kitamura, Akihiro; Kurikami, Hiroshi; Yamaguchi, Masaaki; Oda, Yoshihiro; Saito, Tatsuo; Kato, Tomoko; Niizato, Tadafumi; Iijima, Kazuki; Sato, Haruo; Yui, Mikazu; et al.

Nuclear Science and Engineering, 179(1), p.104 - 118, 2015/01

 Times Cited Count:8 Percentile:56.45(Nuclear Science & Technology)

The prediction of the distribution and fate of radioactive materials eventually deposited at surface in the Fukushima area is one of the main objectives and expected to be achieved in an efficient manner. In order to make such prediction, a number of mathematical models of radioactive contaminants, with particular attention on cesium, on the land and in rivers, lakes, and estuaries in the Fukushima area are developed. Simulation results are examined with the field investigations simultaneously implemented. The basic studies of the adsorption/absorption mechanism of cesium and soils have been performed to shed light on estimating distribution coefficient between dissolved contaminant and particulate contaminant.

78 (Records 1-20 displayed on this page)