Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Hasegawa, Noboru; Ochi, Yoshihiro; Kawachi, Tetsuya; Nishikino, Masaharu; Ishino, Masahiko; Imazono, Takashi; Kaihori, Takeshi; Morita, Toshimasa; Sasaki, Akira; Terakawa, Kota*; et al.
X-Ray Lasers 2012; Springer Proceedings in Physics, Vol.147, p.117 - 120, 2014/00
Times Cited Count：0 Percentile：0(Engineering, Electrical & Electronic)We have developed the femto-second laser pump and soft X-ray laser probe system in order to observe the dynamical processes of the femto-second laser ablation. By using this system, we succeed to obtain the temporal evolution of the soft X-ray reflectivity from the laser induced Pt surface. The results lead that the rate of decrease in the reflectivity of the probe beam has a non-linear relation with the pump laser fluence.
Nishikino, Masaharu; Hasegawa, Noboru; Ishino, Masahiko; Yamagiwa, Mitsuru; Kawachi, Tetsuya; Minami, Yasuo*; Terakawa, Kota*; Takei, Ryota*; Baba, Motoyoshi*; Suemoto, Toru; et al.
JAEA-Conf 2013-001, p.16 - 19, 2013/09
The dynamics of the femtosecond laser ablation is still not clear at the early stage. Several studies on the time-resolved imaging of femtosecond laser ablation process have been performed on various materials. In this study, we have demonstrated a pump and probe imaging of the metal surface morphology during the femtosecond laser ablation by using the laser-driven plasma induced soft X-ray laser (SXRL) as a probe beam. The pumping laser used for ablation was a Ti:Sapphire laser system based on chirped pulse amplification. The pump beam had a Gaussian profile and the focal spot size on the metal surface was about 70 micron at FWHM. The dependence for the pump laser fluence of the ablation surface expansion and the surface condition (roughness and density gradient) were observed from the soft X-ray interferogram and reflective image, respectively.
Takano, Nao*; Takahashi, Yuko*; Yamamoto, Mitsuru*; Teranishi, Mika*; Yamaguchi, Hiroko*; Sakamoto, Ayako; Hase, Yoshihiro; Fujisawa, Hiroko*; Wu, J.*; Matsumoto, Takashi*; et al.
Journal of Radiation Research, 54(4), p.637 - 648, 2013/07
Times Cited Count：13 Percentile：50.15(Biology)Shiga, Hideaki*; Taki, Junichi*; Washiyama, Koshin*; Yamamoto, Jumpei*; Kinase, Sakae; Okuda, Koichi*; Kinuya, Seigo*; Watanabe, Naoto*; Tonami, Hisao*; Koshida, Kichiro*; et al.
PLOS ONE (Internet), 8(2), p.e57671_1 - e57671_8, 2013/02
Times Cited Count：18 Percentile：68.67(Multidisciplinary Sciences)Tomita, Takuro*; Yamamoto, Minoru*; Hasegawa, Noboru; Terakawa, Kota*; Minami, Yasuo*; Nishikino, Masaharu; Ishino, Masahiko; Kaihori, Takeshi*; Ochi, Yoshihiro; Kawachi, Tetsuya; et al.
Optics Express (Internet), 20(28), p.29329 - 29337, 2012/12
Times Cited Count：19 Percentile：64.97(Optics)Pump and probe reflective imaging using a soft X-ray laser probe was applied to the observation of the early stage of femtosecond laser ablation process on platinum. In strongly excited area, drastic and fast reflectivity drop was observed. In moderately excited area, the decay of the reflectivity is slower than that in the strongly excited area, and the reflectivity reaches its minimum at t = 160 ps. In weakly excited area, laser-induced reflectivity change was not observed. These results give the critical information about the femtosecond laser ablation.
Komatsu, Mitsuru*; Nishigaki, Makoto*; Seno, Shoji*; Hirata, Yoichi*; Takenobu, Kazuyoshi*; Tagishi, Hirotaka*; Kunimaru, Takanori; Maekawa, Keisuke; Yamamoto, Yoichi; Toida, Masaru*; et al.
JAEA-Research 2012-001, 77 Pages, 2012/09
JAEA-Research-2012-001.pdf:4.85MB
This research focused on methods of estimating the amounts of groundwater recharge, which are normally required as upper boundary conditions in groundwater flow analyses, based on measurements of infiltrating water in the ground, to systematize the methods and establish systems which are stable and measurable on site over a long time. Regarding developing measurement systems, fiber-optic strain measurement methods that enable multiple-point and long-distance measurement were used for measuring three quantities: suction pressure, soil moisture and volumetric water content rate obtained by applying water absorption swelling material, and each measurement was discussed. The results showed that the fiber-optic soil aquameter has two types of practical application: one for measuring suction pressure (Type I), and the other for measuring volumetric water content rate obtained by applying water absorption swelling material (Type III). Furthermore, by using measurement instruments in actual fields, the validity of the two methods for estimating the rainfall infiltration capacities of shallow-layer soils, that is, estimating the capacities either directly by measurements of soil water or from unsaturated hydraulic conductivities, was confirmed.
Takano, Nao*; Takahashi, Yuko*; Yamamoto, Mitsuru*; Teranishi, Mika*; Hase, Yoshihiro; Sakamoto, Ayako; Tanaka, Atsushi; Hidema, Jun*
JAEA-Review 2011-043, JAEA Takasaki Annual Report 2010, P. 104, 2012/01
Komatsu, Mitsuru*; Nishigaki, Makoto*; Seno, Shoji*; Toida, Masaru*; Tagishi, Hirotaka*; Takenobu, Kazuyoshi*; Yamamoto, Yoichi
Chikasui Jiban Kankyo Ni Kansuru Shimpojium 2011 Happyo Rombunshu (CD-ROM), p.17 - 26, 2011/11
no abstracts in English
Hasegawa, Noboru; Ochi, Yoshihiro; Kawachi, Tetsuya; Nishikino, Masaharu; Ishino, Masahiko; Imazono, Takashi; Kaihori, Takeshi; Sasaki, Akira; Terakawa, Kota*; Minami, Yasuo*; et al.
Proceedings of SPIE, Vol.8140, p.81400G_1 - 81400G_8, 2011/10
Times Cited Count：3 Percentile：82.2(Engineering, Electrical & Electronic)We have developed a soft X-ray laser (SXRL) interferometer capable of the single-shot imaging of nano-scaled structure dynamics. The interferometer consisted of the reflection optics including double Lloyd's mirrors and focusing optics, and the interference fringes are produced on the detector surface. By using this interferometer, the initial stage (
50 ps) of the ablation process of the Pt surface pumped by a 70 fs Ti:Sapphire laser pulse was observed. The expansion speed of the surface estimated from the result (34 nm/50 ps) indicated that the nano-bubble structures were formed in the initial stage of the ablation. In order to observe the detailed dynamics, the temporal synchronization between the pump and probe pulses was improved to be 3 ps by adopting a portion of the SXRL and pump beams as the time fiducials, to which the pump and probe timing was adjusted by using the X-ray streak camera.
Yamamoto, Minoru; Hasegawa, Noboru; Terakawa, Kota*; Umeda, Yoshifumi*; Tomita, Takuro*; Ochi, Yoshihiro; Nishikino, Masaharu; Ishino, Masahiko; Imazono, Takashi; Kaihori, Takeshi; et al.
Proceedings of 12th International Symposium on Laser Precision Microfabrication (LPM 2011) (Internet), 4 Pages, 2011/06
Femtosecond lasers have been used for material processing. However, the physical processes responsible for femtosecond laser ablation have not been understood completely. These processes involve melting, vaporization, re-solidification or ablation, which occur in a very short time from pico- to nano-seconds. To understand the physical processes, it is essential to reveal the dynamics of ultrafast surface morphological change after laser irradiation. At JAEA, the laser-driven plasma soft X-ray laser (SXRL) that has extremely high spatial and spectral purity was constructed. It delivers soft X-ray photons at 89.2 eV (13.9 nm) with a photon number of exceeding 
, which is sufficient to obtain a single shot interferogram. By using this system, the soft X-ray laser interferometer with the lateral resolution of 1.8 
m and a depth resolution of 1 nm was developed. We report on demonstration of time-resolved measurement of femtosecond-laser ablation dynamics by using the soft X-ray laser interferometer.
Yamamoto, Tomohiko; Uesaka, Mitsuru*
E-Journal of Advanced Maintenance (Internet), 2(4), p.200 - 206, 2011/02
We have developed an X-ray source using portable X-band (9.3-12 GHz) linear accelerator (linac) for bearing real-time inspection. This system can generate pulsed-X-ray, therefore if X-ray repetition rate synchronizes with bearing rotation rate, we can get still images without stopping rotation. We succeeded in static imaging of rotating equipment. We start to develop more advanced X-ray generators using portable linac and multi-beam klystron (MBK). The advanced systems use higher electron energy linac and MBK as more stable radio-frequency (RF) source. We used 950 keV linac and 250 kW magnetron for X-ray imaging. For the purpose of more stable operation and compactness of the system, we propose a multi-beam klystron (MBK) as its RF power source. In this paper, we show the basic parameters of the system which stability is tolerable for bearing condition based maintenance (CBM) in near future.
Matsukawa, Makoto; Kikuchi, Mitsuru; Fujii, Tsuneyuki; Fujita, Takaaki; Hayashi, Takao; Higashijima, Satoru; Hosogane, Nobuyuki; Ikeda, Yoshitaka; Ide, Shunsuke; Ishida, Shinichi; et al.
Fusion Engineering and Design, 83(7-9), p.795 - 803, 2008/12
Times Cited Count：17 Percentile：72.86(Nuclear Science & Technology)no abstracts in English
Ninomiya, Hiromasa; Akiba, Masato; Fujii, Tsuneyuki; Fujita, Takaaki; Fujiwara, Masami*; Hamamatsu, Kiyotaka; Hayashi, Nobuhiko; Hosogane, Nobuyuki; Ikeda, Yoshitaka; Inoue, Nobuyuki; et al.
Journal of the Korean Physical Society, 49, p.S428 - S432, 2006/12
To contribute DEMO and ITER, the design to modify the present JT-60U into superconducting coil machine, named National Centralized Tokamak (NCT), is being progressed under nationwide collaborations in Japan. Mission, design and strategy of this NCT program is summarized.
Kando, Masaki; Masuda, Shinichi; Zhidkov, A.*; Yamazaki, Atsushi; Kotaki, Hideyuki; Kondo, Shuji; Homma, Takayuki*; Kanazawa, Shuhei; Nakajima, Kazuhisa; Hayashi, Yukio; et al.
Physical Review E, 71(1), p.015403_1 - 015403_4, 2005/01
Times Cited Count：33 Percentile：77.37(Physics, Fluids & Plasmas)no abstracts in English
Tamai, Hiroshi; Matsukawa, Makoto; Kurita, Genichi; Hayashi, Nobuhiko; Urata, Kazuhiro*; Miura, Yushi; Kizu, Kaname; Tsuchiya, Katsuhiko; Morioka, Atsuhiko; Kudo, Yusuke; et al.
Plasma Science and Technology, 6(1), p.2141 - 2150, 2004/02
Times Cited Count：2 Percentile：6.49(Physics, Fluids & Plasmas)The dominant issue for the the modification program of JT-60 (JT-60SC) is to demonstrate the steady state reactor relevant plasma operation. Physics design on plasma parameters, operation scenarios, and the plasma control method are investigated for the achievement of high-
. Engineering design and the R&D on the superconducting magnet coils, radiation shield, and vacuum vessel are performed. Recent progress in such physics and technology developments is presented.
Ishida, Shinichi; Abe, Katsunori*; Ando, Akira*; Chujo, T.*; Fujii, Tsuneyuki; Fujita, Takaaki; Goto, Seiichi*; Hanada, Kazuaki*; Hatayama, Akiyoshi*; Hino, Tomoaki*; et al.
Nuclear Fusion, 43(7), p.606 - 613, 2003/07
no abstracts in English
Ishida, Shinichi; Abe, Katsunori*; Ando, Akira*; Cho, T.*; Fujii, Tsuneyuki; Fujita, Takaaki; Goto, Seiichi*; Hanada, Kazuaki*; Hatayama, Akiyoshi*; Hino, Tomoaki*; et al.
Nuclear Fusion, 43(7), p.606 - 613, 2003/07
Times Cited Count：33 Percentile：69.14(Physics, Fluids & Plasmas)no abstracts in English
Ushigusa, Kenkichi; Ide, Shunsuke; Oikawa, Toshihiro; Suzuki, Takahiro; Kamada, Yutaka; Fujita, Takaaki; Ikeda, Yoshitaka; Naito, Osamu; Matsuoka, Mamoru*; Kondoh, Takashi; et al.
Fusion Science and Technology (JT-60 Special Issue), 42(2-3), p.255 - 277, 2002/09
Times Cited Count：10 Percentile：15.15(Nuclear Science & Technology)Studies on non-inductive current drive and development of an integrated steady-state high performance operation in JT-60 are reviewed. Experiments on lower hybrid current drive in JT-60 haven shown a large non-inductive current up to 3.5MA, high current drive efficiency of 3.6x1019m-2A/W. Basic studies on LH waves in JT-60 have contributed to understand current drive physics. Significant progress in neutral beam current drive has been made in JT-60 by testing the performance of negative ion based NBI (N-NBI). The CD efficiency of ~1.5x1019m-2A /W, and N-NB driven current of ~1MA have been demonstrated in N-NBCD. Strongly localized driven current by electron cyclotron current drive was identified with a fundamental O-mode scheme. Efficiency of 0.5x1019m-2A/W and EC driven current of 0.2MA were achieved and suppression of neo-classical tearing mode was demonstrated. Based on these developments, two integrated steady-state operation scenarios were developed in JT-60, which are reversed magnetic shear (R/S) plasmas and high bp ELMy H-mode. In these operation regimes, discharges have been sustained near the steady-state current profile under full non-inductive current drive. High performance plasmas with a high nDotETio and at high normalized density were also produced under fully non-inductive condition in high bp ELMy H-mode and R/S mode.
Sato, Masayasu; Miura, Yukitoshi; Kimura, Haruyuki; Kawashima, Hisato; Sengoku, Seio; Yamamoto, Masahiro; ; Shibata, Takatoshi; Akiyama, Takashi*; Abe, Mitsushi*; et al.
Purazuma, Kaku Yugo Gakkai-Shi, 75(6), p.741 - 749, 1999/06
no abstracts in English
Miya, Naoyuki; Kikuchi, Mitsuru; Ushigusa, Kenkichi; ; Nagashima, Keisuke; Neyatani, Yuzuru; Tobita, Kenji; ; Masaki, Kei; Kaminaga, Atsushi; et al.
JAERI-Research 98-012, 222 Pages, 1998/03
JAERI-Research-98-012.pdf:8.71MB
no abstracts in English
