Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Sakai, Hiroshi*; Enami, Kazuhiro*; Furuya, Takaaki*; Kako, Eiji*; Kondo, Yoshinari*; Michizono, Shinichiro*; Miura, Takako*; Qiu, F.*; Sato, Masato*; Shinoe, Kenji*; et al.
Proceedings of 56th ICFA Advanced Beam Dynamics Workshop on Energy Recovery Linacs (ERL 2015) (Internet), p.63 - 66, 2015/12
no abstracts in English
O in the film on Fe oxidized at high temperature in airHaruna, Takumi*; Yamamoto, Tatsuya*; Miyairi, Yoji*; Shibata, Toshio*; Taniguchi, Naoki; Sakamaki, Keiko; Tachikawa, Hirokazu*
Zairyo To Kankyo, 64(5), p.201 - 206, 2015/05
Diffusion coefficients of DO in the films was determined in order to estimate corrosion rate of carbon steel for the overpack in ground water. Fe plates were heated to form oxide films. The films were characterized with XRD and SEM. After that, the specimen was contacted with DO for 5184 ks, followed by subjected to TDS to obtain an amount of DO absorbing into the film. As a result, single-layered film of Fe
O
was formed at 573 and 723 K, and double-layered film of FeO and FeO was formed at 873 K. It was found that an amount of DO in the film correlated linearly with a square root of the absorption period, and that the amount was steady for a long period. From the results and Fick's second law, diffusion coefficients of DO was determined as 9.7
10
cm
s
for the FeO film, and 5.510 cms to 2.210
cms for FeO film.
Umemori, Kensei*; Furuya, Takaaki*; Kako, Eiji*; Noguchi, Shuichi*; Sakai, Hiroshi*; Sato, Masato*; Shishido, Toshio*; Watanabe, Ken*; Yamamoto, Yasuchika*; Shinoe, Kenji*; et al.
Proceedings of 15th International Conference on RF Superconductivity (SRF 2011) (Internet), p.956 - 961, 2011/07
The Compact ERL (cERL) project is advanced in Japan. Its aim is to demonstrate the circulation of 100 mA electron beams with energy of 35-200 MeV. Superconducting cavities are key components for realizing ERL and used for injector part and main linac part. Critical issue for the injector part is the development of input power coupler. Prototype input couplers were fabricated and high power test was performed. Cooling ability of HOM coupler is also important for CW operation of cavity. At main linac part, HOM damped 9-cell cavities are applied to avoid BBU instabilities. Prototypes were fabricated for the cavity, the input coupler and the HOM absorber. Their performance was investigated. For both parts, cryomodules are under construction and will be completed in 2012.
Sakanaka, Shogo*; Akemoto, Mitsuo*; Aoto, Tomohiro*; Arakawa, Dai*; Asaoka, Seiji*; Enomoto, Atsushi*; Fukuda, Shigeki*; Furukawa, Kazuro*; Furuya, Takaaki*; Haga, Kaiichi*; et al.
Proceedings of 1st International Particle Accelerator Conference (IPAC '10) (Internet), p.2338 - 2340, 2010/05
Future synchrotron light source using a 5-GeV energy recovery linac (ERL) is under proposal by our Japanese collaboration team, and we are conducting R&D efforts for that. We are developing high-brightness DC photocathode guns, two types of cryomodules for both injector and main superconducting (SC) linacs, and 1.3 GHz high CW-power RF sources. We are also constructing the Compact ERL (cERL) for demonstrating the recirculation of low-emittance, high-current beams using above-mentioned critical technologies.
Sakai, Hiroshi*; Furuya, Takaaki*; Kako, Eiji*; Noguchi, Shuichi*; Sato, Masato*; Sakanaka, Shogo*; Shishido, Toshio*; Takahashi, Takeshi*; Umemori, Kensei*; Watanabe, Ken*; et al.
Proceedings of 45th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL '09) (Internet), p.57 - 62, 2010/05
Development of a SC Cavity Injector Cryomodule and Main linac Cryomodule for the compact ERL is being continued at KEK since 2006. Design of an injector cryomodule containing three 2-cell 1.3-GHz cavities for Injector Cryomodule and two 9-cell 1.3-GHz cavities for Main linac Cryomodule are almost completed. Status of R&D and design details are reported.
Umemori, Kensei*; Furuya, Takaaki*; Kako, Eiji*; Noguchi, Shuichi*; Sakai, Hiroshi*; Sato, Masato*; Shishido, Toshio*; Takahashi, Takeshi*; Watanabe, Ken*; Yamamoto, Yasuchika*; et al.
Proceedings of 14th International Conference on RF Superconductivity (SRF 2009) (Internet), p.896 - 901, 2009/09
Construction of the Compact ERL is planned in Japan, in order to test the key technology to realize a future ERL based X-ray light source. The operation of 60-200 MeV beam energy and 100 mA beam current are proposed. The superconducting cavity is one of the key components and applied for the injector part and the main linac part. At the injector part, most challenging issue is an input coupler, which has to handle more than 300 kW input power per cavity. On the other hand, strong HOM damping is required for the main linac, in order to avoid beam instabilities and large heat load at cryomodules. Status of cavity developments, together with cryomodule developments, including input couplers and HOM couplers/absorbers, are described in this paper.
Kato, Yoshiaki; Yamamoto, Toshio; Takada, Fumiki; Omi, Masao; Nakagawa, Tetsuya
JAEA-Testing 2008-004, 22 Pages, 2008/06
JAEA-Testing-2008-004.pdf:5.88MB
This report is concerned with replacement of the radiation monitors in the lead cells of JMTR Hot Laboratory in the 2007 fiscal year. It was carried out on two of seven systems of the radiation monitors. The designing, producing, installing, adjusting and inspecting were described.
Sakanaka, Shogo*; Ago, Tomonori*; Enomoto, Atsushi*; Fukuda, Shigeki*; Furukawa, Kazuro*; Furuya, Takaaki*; Haga, Kaiichi*; Harada, Kentaro*; Hiramatsu, Shigenori*; Honda, Toru*; et al.
Proceedings of 11th European Particle Accelerator Conference (EPAC '08) (CD-ROM), p.205 - 207, 2008/06
Future synchrotron light sources based on the energy-recovery linacs (ERLs) are expected to be capable of producing super-brilliant and/or ultra-short pulses of synchrotron radiation. Our Japanese collaboration team is making efforts for realizing an ERL-based hard X-ray source. We report recent progress in our R&D efforts.
Yamamoto, Yasuchika*; Hayano, Hitoshi*; Kako, Eiji*; Noguchi, Shuichi*; Sato, Masato*; Shishido, Toshio*; Umemori, Kensei*; Watanabe, Ken*; Sakai, Hiroshi*; Shinoe, Kenji*; et al.
Proceedings of 5th Annual Meeting of Particle Accelerator Society of Japan and 33rd Linear Accelerator Meeting in Japan (CD-ROM), p.888 - 891, 2008/00
In KEK, the new Superconducting RF Test Facility(STF) is being constructed, including the electro-polish system (EP), the high pressure rinsing system (HPR), the clean-room, the refrigerator system, the high power RF source system, and the vertical test system. The cavity is generally measured in the vertical cryostat for the performance test. The new vertical test facility was constructed since the last year, and completed at the beginning of March. The first test was done for the total system check at the beginning of July.
Wakai, Eiichi; Ando, Masami; Sawai, Tomotsugu; Tanigawa, Hiroyasu; Taguchi, Tomitsugu; Stroller, R. E.*; Yamamoto, Toshio; Kato, Yoshiaki; Takada, Fumiki
Journal of Nuclear Materials, 367-370(1), p.74 - 80, 2007/08
Times Cited Count：10 Percentile：58.16(Materials Science, Multidisciplinary)no abstracts in English
Miwa, Yukio; Kaji, Yoshiyuki; Tsukada, Takashi; Yamamoto, Toshio; Kato, Yoshiaki; Yonekawa, Minoru; Matsui, Yoshinori
Proceedings of 15th International Conference on Nuclear Engineering (ICONE-15) (CD-ROM), 6 Pages, 2007/04
Radiation-induced stress relaxation (RISR) test under uniaxial loading condition for tensile type specimens was carried out for type 316L stainless steel (SS). The specimens were irradiated in the Japan Materials Testing Reactor at 561 K to three dose levels (0.1-3 dpa) under four displacement constrained condition (prestrain range; 0.06-0.75%) in order to apply residual stress. Radiation hardening behavior and IASCC susceptibility of the RISR-tested 316L SS were examined by slow strain rate testing (SSRT) in oxygenated high temperature water. It was concluded from the SSRT results that the RISR had little influence on the radiation hardening behavior and IASCC susceptibility in the 316L SS. In all specimens, the residual stress rapidly decreased with increasing dose, and the residual stress level after irradiation was much lower than the stress level to initiate IASCC.
Wakai, Eiichi; Otsuka, Hideo*; Matsukawa, Shingo; Furuya, Kazuyuki*; Tanigawa, Hiroyasu; Oka, Keiichiro*; Onuki, Somei*; Yamamoto, Toshio*; Takada, Fumiki; Jitsukawa, Shiro
Fusion Engineering and Design, 81(8-14), p.1077 - 1084, 2006/02
Times Cited Count：11 Percentile：60.27(Nuclear Science & Technology)no abstracts in English
C in JMTRWakai, Eiichi; Jitsukawa, Shiro; Tomita, Hideki*; Furuya, Kazuyuki; Sato, Michitaka*; Oka, Keiichiro*; Tanaka, Teruyuki*; Takada, Fumiki; Yamamoto, Toshio*; Kato, Yoshiaki; et al.
Journal of Nuclear Materials, 343(1-3), p.285 - 296, 2005/08
Times Cited Count：48 Percentile：93.91(Materials Science, Multidisciplinary)The dependence of helium production on radiation-hardening and -embrittlement has been examined in a reduced-activation martensitic F82H steel doped with 
B, 
B and B+B irradiated at 250C to 2.2 dpa. The total amounts of doping boron were about 60 massppm. The range of He concentration produced in the specimens was from about 5 to about 300 appm. Tensile and fracture toughness tests were performed after neutron irradiation. 50 MeV-He
irradiation was also performed to implant about 85 appm He atoms at 120C by AVF cyclotron to 0.03 dpa, and small punch testing was performed to obtain DBTT. Radiation-hardening of the neutron-irradiated specimens increased slightly with increasing He production. The 100 MPam
DBTT for the F82H+B, F82H+B+B, and F82H+B were 40, 110, and 155C, respectively. The shifts of DBTT due to He production were evaluated as about 70C by 150 appmHe and 115C by 300 appmHe. The DBTT shift in the small punch testing was evaluated as 50C.
Murai, Yuichi*; Oiwa, Hiroshi; Sasaki, Toshio*; Kondo, Masahiko; Yoshikawa, Shinji; Yamamoto, Fujio*
Measurement Science and Technology, 16(7), p.1459 - 1468, 2005/07
Times Cited Count：31 Percentile：81.42(Engineering, Multidisciplinary)Air-water two-phase flow in a helically coiled tube is investigated using backlight imaging tomography to elucidate the effect of centrifugal acceleration on phase distribution and interfacial structure. Superficial velocities up to 6m/s in 20mm-diameter tube are tested. We focused on a slug flow regime in which centrifugal acceleration dominates the flow. The interfacial structure is visualized in six directions using a set of originally designed mirror-mounted water jackets. A temporal expansion image is made from line-sampled images, and is used to reconstruct phase distribution through a linear backward projection algorithm. The present topography measurement showed various new features of gas-liquid two-phase flow in a helically coiled tube, such as a wall-covering effect in the case of high superficial velocity.
Yamamoto, Kazuya; Watanabe, Fumitaka; Matsuoka, Toshio*; Kozawa, Toshikatsu*
JNC TN1420 2005-001, 366 Pages, 2005/06
JNC-TN1420-2005-001.pdf:27.16MB
In relation to
Nishitani, Tomohiro; Nakanishi, Tsutomu*; Yamamoto, Masahiro*; Okumi, Shoji*; Furuta, Fumio*; Miyamoto, Masaharu*; Kuwahara, Makoto*; Yamamoto, Naoto*; Naniwa, Kenichi*; Watanabe, Osamu*; et al.
Journal of Applied Physics, 97(9), p.094907_1 - 094907_6, 2005/05
Times Cited Count：64 Percentile：87.31(Physics, Applied)no abstracts in English
Wakai, Eiichi; Taguchi, Tomitsugu; Yamamoto, Toshio*; Tomita, Hideki*; Takada, Fumiki; Jitsukawa, Shiro
Materials Transactions, 46(3), p.481 - 486, 2005/03
Times Cited Count：7 Percentile：51.67(Materials Science, Multidisciplinary)no abstracts in English
Oiwa, Hiroshi; Murai, Yuichi*; Sasaki, Toshio*; Yoshikawa, Shinji; Yamamoto, Fujio*
Proceedings of 4th World Congress on Industrial Process Tomography, Vol.1, p.428 - 433, 2005/00
We carried out reflection seismic and multi-offset VSP surveys at JNC Shobasama-site to develop the investigation technique in the granite area, and evaluated the applicability of these geophysical methods. As the result of this study, we consider that a) It is possible to infer the existence of the lower angle fracture zone in the granite by eflection seismic survey and b) Multi-offset VSP supplements the result of reflection seismic survey and it is possible to infer the distribution of the fracture zone in deeper area in the granite.
Wakai, Eiichi; Taguchi, Tomitsugu; Yamamoto, Toshio*; Kato, Yoshiaki; Takada, Fumiki
Materials Transactions, 45(8), p.2638 - 2640, 2004/08
Times Cited Count：1 Percentile：12.44(Materials Science, Multidisciplinary)no abstracts in English
Wakai, Eiichi; Matsukawa, Shingo; Yamamoto, Toshio*; Kato, Yoshiaki; Takada, Fumiki; Sugimoto, Masayoshi; Jitsukawa, Shiro
Materials Transactions, 45(8), p.2641 - 2643, 2004/08
Times Cited Count：6 Percentile：41.12(Materials Science, Multidisciplinary)no abstracts in English
