Visualisation and quantitative evaluation of chlorides in corroded crevice of stainless steel using radioisotope Cl

Aoki, So; Abe, Yosuke; Abe, Hiroshi*; Watanabe, Yutaka*; Yamamoto, Masahiro*

Corrosion Science, 255, p.113119_1 - 113119_10, 2025/10

https://doi.org/10.1016/j.corsci.2025.113119

This study aimed to visualise the distribution of chloride in the corroded crevice of stainless steel and to evaluate the chloride content quantitatively. Crevice corrosion tests were carried out using Cl, a radioactive isotope of chloride, as a tracer in NaCl test solutions. After crevice corrosion tests, stainless steel specimens were placed on an imaging plate. The imaging plate was sensitised by -ray emitted by Cl adhering to the crevice. As a result, the chloride distribution in the corroded area inside the crevice was visualised. A calibration curve for the amount of Cl was obtained from the relationship between the time of photosensitivity to -ray emitted by Cl and the luminance of the imaging plate. The chloride content in the corroded crevice was quantitatively evaluated based on the calibration curve. These visualisation and quantitative evaluation methods were also applied to tests in which specimens were left in pure water after crevice corrosion tests, and the behaviour of chloride in crevice corrosion was discussed.

Selective resonance ionization of odd calcium isotopes using linearly polarized lasers

Iwata, Yoshihiro; Miyabe, Masabumi; Wells, S. R.*; Yamamoto, Yuta*; Hasegawa, Shuichi*

Proceedings of International Topical Workshop on Fukushima Decommissioning Research 2024 (FDR2024) (Internet), 4 Pages, 2024/10

In this study, triple and double resonance ionization schemes of atomic Ca were developed, aiming for the separation of odd isotopes by (i) laser polarization-dependent selection rules, and (ii) large isotope shifts of odd Ca isotopes in the Rydberg levels. Separation of odd isotopes was confirmed under the orthogonal condition. Suppression of non-resonant ionization of Ca by the electric field in the ionization region could further improve the optical isotope selectivity of Ca.

Document collection of the 39th Technical Special Committee on Fugen Decommissioning

Sato, Yuji; Miyamoto, Yuta; Awatani, Yuto; Yamamoto, Kosuke; Hatakeyama, Takumi

JAEA-Review 2023-002, 59 Pages, 2023/08

JAEA-Review-2023-002.pdf:8.75MB

"Fugen Decommissioning Engineering Center", in planning and carrying out our decommissioning technical development, organizes "Technical special committee on Fugen decommissioning" which consists of the members well-informed, aiming to make good use of Fugen as a place for technological development which is opened domestic and international, as the central place in research and development base of Fukui prefecture, and to utilize the outcome in our decommissioning to the technical development effectively. This report consists of presentation paper are "Achievements and Considerations for Sampling and Analysis of Reactor Core Components", "Treatment of liquid scintillator waste liquid" and "Results and issues of rationalization of decontamination related to the clearance and considerations related to surface contamination monitoring" which is presented in the 39th Technical Special Committee on Fugen Decommissioning.

Investigation of hydrogen superoxide adsorption during ORR on Pt/C catalyst in acidic solution for PEFC by high energy resolution XAFS

Yamamoto, Naoki*; Matsumura, Daiju; Hagihara, Yuto*; Tanaka, Kei*; Hasegawa, Yuta*; Ishii, Kenji*; Tanaka, Hirohisa*

Journal of Power Sources, 557, p.232508_1 - 232508_10, 2023/02

https://doi.org/10.1016/j.jpowsour.2022.232508

Investigation of physical properties of glove for glove-box and estimation of its life-time

Kobayashi, Daisuke; Yamamoto, Masahiko; Nishida, Naoki; Miyoshi, Ryuta; Nemoto, Ryo*; Hayashi, Hiroyuki*; Kato, Keisuke; Nishino, Saki; Kuno, Takehiko; Kitao, Takahiko; et al.

Nihon Hozen Gakkai Dai-18-Kai Gakujutsu Koenkai Yoshishu, p.237 - 240, 2022/07

All gloves attached to glove-box in Tokai Reprocessing Plant have a fixed expiration date and have to be replaced every 4-year. However, degrees of glove deterioration are different depending on its usage environment (frequency, chemicals, radiation, etc.), because of rubber products. Therefore, physical properties such as tensile strength, elongation, hardness of gloves are measured, and the life-time of gloves are estimated. As a result, gloves without any defects in its appearance have enough physical property for acceptance criteria of new glove. The extrapolated physical property of glove is sufficiently larger than the reported values of damaged glove. No deterioration in physical properties of gloves, that are periodically replaced without any defects in its appearance, is observed and the usable life-time of the glove is estimated to be 8 years.

Determination of site occupancy of boron in 6H-SiC by multiple-wavelength neutron holography

Hayashi, Koichi*; Lederer, M.*; Fukumoto, Yohei*; Goto, Masashi*; Yamamoto, Yuta*; Happo, Naohisa*; Harada, Masahide; Inamura, Yasuhiro; Oikawa, Kenichi; Oyama, Kenji*; et al.

Applied Physics Letters, 120(13), p.132101_1 - 132101_6, 2022/03

https://doi.org/10.1063/5.0080895

A New approach for measuring the muon anomalous magnetic moment and electric dipole moment

Abe, Mitsushi*; Bae, S.*; Beer, G.*; Bunce, G.*; Choi, H.*; Choi, S.*; Chung, M.*; da Silva, W.*; Eidelman, S.*; Finger, M.*; et al.

Progress of Theoretical and Experimental Physics (Internet), 2019(5), p.053C02_1 - 053C02_22, 2019/05

https://doi.org/10.1093/ptep/ptz030

This paper introduces a new approach to measure the muon magnetic moment anomaly and the muon electric dipole moment (EDM) at the J-PARC muon facility. The goal of our experiment is to measure and using an independent method with a factor of 10 lower muon momentum, and a factor of 20 smaller diameter storage-ring solenoid compared with previous and ongoing muon g-2 experiments with unprecedented quality of the storage magnetic field. Additional significant differences from the present experimental method include a factor of 1000 smaller transverse emittance of the muon beam (reaccelerated thermal muon beam), its efficient vertical injection into the solenoid, and tracking each decay positron from muon decay to obtain its momentum vector. The precision goal for is a statistical uncertainty of 450 parts per billion (ppb), similar to the present experimental uncertainty, and a systematic uncertainty less than 70 ppb. The goal for EDM is a sensitivity of ecm.

New precise measurement of muonium hyperfine structure interval at J-PARC

Ueno, Yasuhiro*; Aoki, Masaharu*; Fukao, Yoshinori*; Higashi, Yoshitaka*; Higuchi, Takashi*; Iinuma, Hiromi*; Ikedo, Yutaka*; Ishida, Katsuhiko*; Ito, Takashi; Iwasaki, Masahiko*; et al.

Hyperfine Interactions, 238(1), p.14_1 - 14_6, 2017/11

https://doi.org/10.1007/s10751-016-1381-7

New muonium HFS measurements at J-PARC/MUSE

Strasser, P.*; Aoki, Masaharu*; Fukao, Yoshinori*; Higashi, Yoshitaka*; Higuchi, Takashi*; Iinuma, Hiromi*; Ikedo, Yutaka*; Ishida, Katsuhiko*; Ito, Takashi; Iwasaki, Masahiko*; et al.

Hyperfine Interactions, 237(1), p.124_1 - 124_9, 2016/12

https://doi.org/10.1007/s10751-016-1331-4

Development of risk assessment methodology of decay heat removal function against natural external hazards for sodium-cooled fast reactors; Project overview and volcanic PRA methodology

Yamano, Hidemasa; Nishino, Hiroyuki; Kurisaka, Kenichi; Okano, Yasushi; Sakai, Takaaki; Yamamoto, Takahiro*; Ishizuka, Yoshihiro*; Geshi, Nobuo*; Furukawa, Ryuta*; Nanayama, Futoshi*; et al.

Proceedings of 24th International Conference on Nuclear Engineering (ICONE-24) (DVD-ROM), 10 Pages, 2016/06

https://doi.org/10.1115/ICONE24-60023

This paper describes mainly volcanic probabilistic risk assessment (PRA) methodology development for sodium-cooled fast reactors in addition to the project overview. The volcanic ash could potentially clog air filters of air-intakes that are essential for the decay heat removal. The degree of filter clogging can be calculated by atmospheric concentration of ash and tephra fallout duration and also suction flow rate of each component. The atmospheric concentration can be calculated by deposited tephra layer thickness, tephra fallout duration and fallout speed. This study evaluated a volcanic hazard using a combination of tephra fragment size, layer thickness and duration. In this paper, each component functional failure probability was defined as a failure probability of filter replacement obtained by using a grace period to a filter failure limit. Finally, based on an event tree, a core damage frequency was estimated about 310/year in total by multiplying discrete hazard probabilities by conditional decay heat removal failure probabilities. A dominant sequence was led by the loss of decay heat removal system due to the filter clogging after the loss of emergency power supply. A dominant volcanic hazard was 10 kg/m of atmospheric concentration, 0.1 mm of tephra diameter, 50-75 cm of deposited tephra layer thickness, and 1-10 hr of tephra fallout duration.