Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Ono, Ayako; Sakashita, Hiroto*; Yamashita, Susumu; Suzuki, Takayuki*; Yoshida, Hiroyuki
Proceedings of 12th Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS12) (Internet), 7 Pages, 2022/10
The new prediction method of critical heat flux (CHF) of the fuel assemblies based on the mechanism is proposed in this study. The prediction method of CHF based on the mechanism has been needed for a long time to enhance the safety analysis and reduce the design cost. From several experimental findings of the liquid-vapor behavior near the heating surface from the nucleate boiling to the CHF, the authors consider that the macrolayer dryout model will be appropriate to predict the CHF under the reactor condition. The prediction method of the macrolayer thickness and the passage period of vapor mass in the fuel assemblies are needed to predict CHF from the macrolayer dryout model. In this study, the CHF under the forced convection is evaluated by combining the prediction methods for the macrolayer thickness and passage period of vapor mass, which are proposed by authors. The prediction of the CHF under the forced convection is examined and compared with the experimental data.
Ono, Ayako; Yamashita, Susumu; Sakashita, Hiroto*; Suzuki, Takayuki*; Yoshida, Hiroyuki
Proceedings of 13th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety (NUTHOS-13) (Internet), 12 Pages, 2022/09
Japan Atomic Energy Agency is developing the computational fluid dynamics code, JUPITER, based on the volume of fluid (VOF) method to analyze detailed thermal-hydraulics in a reactor. The detailed numerical simulation of boiling from a heating surface needs a substantial computational cost to resolve the microscale thermal-hydraulic phenomena such as the bubble generation from a cavity and evaporation of a micro-layer. This study developed the simplified boiling model from the heating surface to reduce the computational cost, which will apply to the detailed simulation code based on the surface tracking method such as JUPITER. We applied the simplified boiling model to JUPITER, and compared the simulation results with the experimental data of the vertical heating surface in the forced convection. We confirmed the degree of their reproducibility, and the issues to be modified were extracted.
Ono, Ayako; Yamashita, Susumu; Sakashita, Hiroto*; Suzuki, Takayuki*; Yoshida, Hiroyuki
Dai-26-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (Internet), 4 Pages, 2022/07
JAEA is implementing a simulation of a two-phase flow in the reactor core by TPFIT and JUPITER which are developed by JAEA based on the surface tracking method. However, it is impossible to simulate a boiling on the heating surface in the large-scale domain by this type of simulation method since the simulation of boiling based on the surface tracking method needs the fine mesh which sufficiently resolves the initiation of boiling. Therefore, JAEA started to develop the simplified boiling model applied for the two-phase flow in the fuel assemblies. In this study, the simulation results of the convection boiling on a vertical heating surface and the comparison between the simulation results and experimental results are shown.
Koyama, Shinichi; Nakagiri, Toshio; Osaka, Masahiko; Yoshida, Hiroyuki; Kurata, Masaki; Ikeuchi, Hirotomo; Maeda, Koji; Sasaki, Shinji; Onishi, Takashi; Takano, Masahide; et al.
Hairo, Osensui Taisaku jigyo jimukyoku Homu Peji (Internet), 144 Pages, 2021/08
JAEA performed the subsidy program for the "Project of Decommissioning and Contaminated Water Management (Development of Analysis and Estimation Technology for Characterization of Fuel Debris (Development of Technologies for Enhanced Analysis Accuracy and Thermal Behavior Estimation of Fuel Debris))" in 2020JFY. This presentation summarized briefly the results of the project, which will be available shortly on the website of Management Office for the Project of Decommissioning and Contaminated Water Management.
Ishida, Tsuyoshi*; Fujito, Wataru*; Yamashita, Hiroto*; Naoi, Makoto*; Fujii, Hirokazu*; Suzuki, Kenichiro*; Matsui, Hiroya
Rock Mechanics and Rock Engineering, 52(2), p.543 - 553, 2019/02
Times Cited Count:16 Percentile:66.04(Engineering, Geological)We pressurized and injected water in a hole drilled downward from a floor of the 500 m level gallery in MIU, central Japan. Acoustic emissions (AEs) monitored with 16 sensors in four boreholes located 1 m away from the HF hole exhibited two-dimensional distributions, which likely delineate a crack induced by the fracturing. Expansions of the regions in which AEs occurred were observed only immediately after the first and second BDs. Many AE events in other periods were distributed within the regions where AE events had already occurred. The initial motion polarities of P-waves indicate that tensile-dominant AE events occurred when the regions expanded and they were distributed primarily on the frontiers of the regions where AE events had already occurred. The experimental results suggest that increasing the injection flow rate is effective for generating new cracks in the refracturing, with the new crack expansions being induced by tensile fracturing.
Ono, Ayako; Yamashita, Susumu; Sakashita, Hiroto*; Suzuki, Takayuki*; Yoshida, Hiroyuki
no journal, ,
JAEA is implementing a simulation of a two-phase flow in the reactor core by TPFIT and JUPITER which are developed by JAEA based on the surface tracking method. However, it is impossible to simulate a boiling on the heating surface in the large-scale domain by this type of simulation method since the simulation of boiling based on the surface tracking method needs the fine mesh which sufficiently resolves the initiation of boiling. Therefore, JAEA started to develop the simplified boiling model applied for the two-phase flow in the fuel assemblies. In this study, the simulation results of the convection boiling on vertical heating surface and the comparison between the simulation results and experimental results are shown.
Fujito, Wataru*; Yamashita, Hiroto*; Ziad, B.*; Naoi, Makoto*; Ishida, Tsuyoshi*; Fujii, Hirokazu*; Suzuki, Kenichiro*; Matsui, Hiroya
no journal, ,
For utilization a geothermal energy and mining of a shale gas, hydrofracturing technology become important. In this study, in-situ hydraulic fracturing experiment and AE measurement at Mizunami URL was carried out to examine a break mechanism by hydraulic fracturing. The results suggested that AE with shear mechanism at first breakdown is dominated and AE with tension mechanism is generated at new fracturing.