Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yamazaki, Takumi*; Hirai, Takamasa*; Yagi, Takashi*; Yamashita, Yuichiro*; Uchida, Kenichi*; Seki, Takeshi*; Takanashi, Koki
Physical Review Applied (Internet), 21(2), p.024039_1 - 024039_11, 2024/02
Times Cited Count：0 Percentile：0.01(Physics, Applied)Yano, Yasuhide; Otsuka, Satoshi; Yamashita, Shinichiro; Ogawa, Ryuichiro; Sekine, Manabu; Endo, Toshiaki; Yamagata, Ichiro; Sekio, Yoshihiro; Tanno, Takashi; Uwaba, Tomoyuki; et al.
JAEA-Research 2013-030, 57 Pages, 2013/11
JAEA-Research-2013-030.pdf:48.2MB
It is necessary to develop the fast reactor core materials, which can achieve high-burnup operation improving safety and economical performance. Ferritic steels are expected to be good candidate core materials to achieve this objective because of their excellent void swelling resistance. Therefore, oxide dispersion strengthened (ODS) ferritic steel and 11Cr-ferritic/martensitic steel (PNC-FMS) have been respectively developed for cladding and wrapper tube materials in Japan Atomic Energy Agency. In this study, the effects of fast neutron irradiation on mechanical properties and microstructure of 9Cr-and 12Cr-ODS steel claddings for fast reactor were investigated. Specimens were irradiated in the experimental fast reactor Joyo using the CMIR-6 at temperatures between 420 and 835
C to fast neutron doses ranging from 16 to 33 dpa. The post-irradiation ring tensile tests were carried out at irradiation temperatures.
Otsuka, Satoshi; Kaito, Takeji; Yano, Yasuhide; Yamashita, Shinichiro; Ogawa, Ryuichiro; Uwaba, Tomoyuki; Koyama, Shinichi; Tanaka, Kenya
Journal of Nuclear Science and Technology, 50(5), p.470 - 480, 2013/05
Times Cited Count：5 Percentile：38.34(Nuclear Science & Technology)Four experimental fuel assemblies (EFAs) containing 9Cr-ODS steel cladding fuel pins were previously irradiated in the BOR-60. One of the EFAs achieved the best data, a peak burn-up of 11.9at% and a neutron dose of 51 dpa, without any microstructure instability or any fuel pin rupture. On the other hand, in another EFA (peak burn-up, 10.5at%; peak neutron dose, 44 dpa), peculiar irradiation behaviors such as microstructure instability and fuel pin rupture occurred. The combined effects of matrix Cr heterogeneity (presence of metallic Cr inclusions) and high-temperature irradiation were concluded to be the main cause of the peculiar microstructure change of 9Cr-ODS steel cladding tubes in the BOR-60 irradiation tests. They contributed to the fuel pin rupture.
Kaito, Takeji; Otsuka, Satoshi; Yano, Yasuhide; Tanno, Takashi; Yamashita, Shinichiro; Ogawa, Ryuichiro; Tanaka, Kenya
Proceedings of International Conference on Fast Reactors and Related Fuel Cycles; Safe Technologies and Sustainable Scenarios (FR-13) (USB Flash Drive), 11 Pages, 2013/03
The oxide dispersion strengthened (ODS) ferritic steel claddings developed by Japan Atomic Energy Agency were irradiated in Joyo and BOR-60 in order to confirm their irradiation performance and thus judge their applicability to high burnup and high temperature fast reactor fuels. In Joyo, material irradiation tests up to 33 dpa were carried out at in the temperature range of 693 - 1108 K. The irradiation data were obtained concerning mainly mechanical properties and of microstructure stability. In BOR-60, fuel pin irradiation tests were conducted up to burnup of 11.9 at% and neutron dose of 51 dpa. The irradiation data were obtained concerning fuel-cladding chemical interaction, dimensional stability under irradiation and so on. These results showed the superior irradiation performance of the ODS ferritic steel claddings and their application possibility as fast reactor fuels. This paper describes the evaluation of the obtained irradiation data of ODS ferritic steel claddings.
Yano, Yasuhide; Ogawa, Ryuichiro; Yamashita, Shinichiro; Otsuka, Satoshi; Kaito, Takeji; Akasaka, Naoaki; Inoue, Masaki; Yoshitake, Tsunemitsu; Tanaka, Kenya
Journal of Nuclear Materials, 419(1-3), p.305 - 309, 2011/12
Times Cited Count：20 Percentile：81.43(Materials Science, Multidisciplinary)The effects of fast neutron irradiation on ring tensile properties of oxide dispersion strengthened (ODS) steel claddings for fast reactor were investigated. Specimens were irradiated in the experimental fast reactor Joyo using the material irradiation rig at temperatures between 693 and 1108 K to fast neutron doses ranging from 16 to 33 dpa. The post-irradiation ring tensile tests were carried out at irradiation temperatures. The experimental results showed that there was no significant change in tensile strengths after neutron irradiation below 923 K, but the tensile strengths at neutron irradiation above 1023 K up to 33 dpa were decreased by about 20%. On the other hand, uniform elongation after irradiation was more than 2% at all irradiation conditions. The ring tensile properties of these ODS claddings remained excellent within these irradiation conditions compared with conventional 11Cr ferritic/martensitic steel (PNC-FMS) claddings.
Otsuka, Satoshi; Kaito, Takeji; Yano, Yasuhide; Yamashita, Shinichiro; Ogawa, Ryuichiro; Uwaba, Tomoyuki; Koyama, Shinichi; Tanaka, Kenya
Proceedings of International Conference on Toward and Over the Fukushima Daiichi Accident (GLOBAL 2011) (CD-ROM), 6 Pages, 2011/12
This paper describes evaluation results of in-reactor integrity of 9Cr and 12Cr-ODS steel cladding tubes and the plan for reliability improvement in homogeneous tube production. A fuel assembly in the BOR-60 irradiation test including 9Cr and 12Cr-ODS fuel pins has achieved the highest burn-up, i.e. peak burn-up of 11.9at% and peak neutron dose of 51dpa, without any fuel pin rupture and microstructure instability. In another fuel assembly containing 9Cr and 12Cr-ODS steel fuel pins whose peak burn-up was 10.5at%, one 9Cr-ODS steel fuel pin failed near the upper end of the fuel column. A peculiar microstructure change occurred in the vicinity of the ruptured area. The primary cause of this fuel pin rupture and microstructure change was shown to be the presence of metallic Cr inclusions in the 9Cr-ODS steel tube, which had passed an ultrasonic inspection test for defects. In the next stage from 2011 to 2013, the fabrication technology of full pre-alloy 9Cr-ODS steel cladding tube will be developed.
Yamashita, Shinichiro; Yano, Yasuhide; Ogawa, Ryuichiro; Inoue, Masaki; Yoshitake, Tsunemitsu
no journal, ,
Oxide dispersion strengthened (ODS) steel is a prospective cladding material for the advanced fuel claddings of fast reactors, owing to their excellent radiation resistance and high temperature strength capability. JAEA has been developed two types of 9Cr martensitic and 12Cr ferritic ODS steel claddings, and conducted the irradiation test for the accumulation of irradiation data as well as for the understanding of irradiation behavior of ODS steel claddings. In this study, post irradiation examination data on metallurgical examination, ring-tensile test, hardness measurement, microstructural observation, and chemical analysis were obtained, indicating that there were no significant degradations in mechanical property and also no changes in microstructure due to irradiation and that ODS steel claddings had good irradiation torelance.
Hayashi, Takehiro; Sasaki, Shinji; Mashiko, Shinichi; Yamagata, Ichiro; Ogawa, Ryuichiro; Inoue, Masaki; Yamashita, Shinichiro; Maeda, Koji
no journal, ,
no abstracts in English
Sekio, Yoshihiro; Yamagata, Ichiro; Yamashita, Shinichiro; Sasaki, Shinji; Ogawa, Ryuichiro; Mashiko, Shinichi; Hayashi, Takehiro; Inoue, Toshihiko; Inoue, Masaki; Maeda, Koji
no journal, ,
Corrosion and mechanical property tests utilizing spent fuel cladding made of zircaloy-2 were performed as a tentative test of the project for the purpose of simulating an environment at the very early stage after the accident in the SFP of unit 4 in the Fukushima Dai-ichi Nuclear Power Plant. The result of metallurgical investigation after corrosion test showed that no obvious changes in oxide film formed on the outer surface of cladding such as stripping occurred. In addition to that, the ring-tensile test results of samples after corrosion test was obtained and compared with that of samples before corrosion test, indicating that no significant degradation in mechanical property was confirmed. These results would have indicated that integrity of FAs was kept to be high as same as what it was before conducting corrosion test.
Hayashi, Takehiro; Sasaki, Shinji; Mashiko, Shinichi*; Yamagata, Ichiro; Ogawa, Ryuichiro; Inoue, Masaki; Yamashita, Shinichiro
no journal, ,
In the Great East Japan Earthquake, the Fukushima Dai-ichi Nuclear Power Plants (1F) were in station blackout and dropped their cooling power. To cool the plants, seawater was poured into 1F buildings included SFP. In this study, the immersion tests were carried out with artificial seawater to evaluate the effect on the strength properties of Zircaloy-2 cladding tubes in seawater. The results indicated the growth of corrosion was not observed in microstructures on the surface of Zircaloy-2 tubes, and there were no significant changes in the tensile properties.
Sato, Takumi; Nishi, Tsuyoshi*; Shirasu, Noriko; Kurata, Masaki; Yamashita, Yuichiro*
no journal, ,
no abstracts in English
