Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yang, X.*; Che, G.*; Wang, Y.*; Zhang, P.*; Tang, X.*; Lang, P.*; Gao, D.*; Wang, X.*; Wang, Y.*; Hattori, Takanori; et al.
Nano Letters, 25(3), p.1028 - 1035, 2025/01
Times Cited Count:1 Percentile:0.00(Chemistry, Multidisciplinary)Saturated sp-carbon nanothreads (CNTh) have garnered significant interest due to their predicted high Young's modulus and thermal conductivity. While the incorporation of heteroatoms into the central ring has been shown to influence the formation of CNTh and yield chemically homogeneous products, the impact of pendant groups on the polymerization process remains underexplored. In this study, we investigate the pressure-induced polymerization of phenol, revealing two phase transitions occurring below 0.5 and 4 GPa. Above 20 GPa, phenol polymerizes into degree-4 CNThs featuring hydroxyl and carbonyl groups. Hydrogen transfer of hydroxyl groups was found to hinder the formation of degree-6 nanothreads. Our findings highlight the crucial role of the hydroxyl group in halting further intracolumn polymerization and offer valuable insights for future mechanism research and nanomaterial synthesis.
Fujita, Yoshitaka; Hu, X.*; Yang, Y.*; Kitagawa, Taiga*; Fujihara, Yasuyuki*; Yoshinaga, Hisao*; Hori, Junichi*; Do, T. M. D.*; Suzuki, Tatsuya*; Suematsu, Hisayuki*; et al.
KURNS Progress Report 2023, P. 122, 2024/07
no abstracts in English
Wang, S.*; Wang, J.*; Zhang, S.*; Wei, D.*; Chen, Y.*; Rong, X.*; Gong, W.; Harjo, S.; Liu, X.*; Jiao, Z.*; et al.
Journal of Materials Science & Technology, 185, p.245 - 258, 2024/06
Times Cited Count:15 Percentile:97.90(Materials Science, Multidisciplinary)Zhou, Y.*; Song, W.*; Zhang, F.*; Wu, Y.*; Lei, Z.*; Jiao, M.*; Zhang, X.*; Dong, J.*; Zhang, Y.*; Yang, M.*; et al.
Journal of Alloys and Compounds, 971, p.172635_1 - 172635_7, 2024/01
Times Cited Count:2 Percentile:12.80(Chemistry, Physical)Quach, N. M.*; Ngo, M. C.*; Yang, Y.*; Nguyen, T. B.*; Nguyen, V. T.*; Fujita, Yoshitaka; Do, T. M. D.*; Nakayama, Tadachika*; Suzuki, Tatsuya*; Suematsu, Hisayuki*
Journal of Radioanalytical and Nuclear Chemistry, 332(10), p.4057 - 4064, 2023/10
Times Cited Count:4 Percentile:62.75(Chemistry, Analytical)Technetium-99m (Tc) is the most widely used medical radioisotope in the world and is produced from molybdenum-99 (
Mo). Production of
Mo via the neutron capture method draws attention as an alternative to fission-derived
Mo due to non-proliferation issues, but the specific radioactivity of
Mo is extremely low. In this work, a porous
-MoO
wire was prepared as an irradiation target in order to improve the specific activity by extracting
Mo. Porous
-MoO
wire is synthesized from Mo metal wire by a two-step heating procedure. The hot atom effect of
Mo was confirmed by activity and isotope measurements of the porous
-MoO
wire after neutron irradiation and the water used for extraction. In term of the extraction effectiveness, the effectiveness of
Mo extraction in the porous
-MoO
wire was comparable to that of commercial
-MoO
powder.
Yang, D. S.*; Wu, Y.*; Kanatzidis, E. E.*; Avila, R.*; Zhou, M.*; Bai, Y.*; Chen, S.*; Sekine, Yurina; Kim, J.*; Deng, Y.*; et al.
Materials Horizons, 10(11), p.4992 - 5003, 2023/09
Times Cited Count:12 Percentile:79.80(Chemistry, Multidisciplinary)This paper presents a set of findings that enhances the performance of these systems through the use of microfluidic networks, integrated valves and microscale optical cuvettes formed by three-dimensional printing in hard/soft hybrid materials systems, for accurate spectroscopic and fluorometric assays. Field studies demonstrate the capability of these microcuvette systems to evaluate the concentrations of copper, chloride, and glucose in sweat, along with the sweat pH, with laboratory grade accuracy and sensitivity.
Liu, S.*; Yang, D. S.*; Wang, S.*; Luan, H.*; Sekine, Yurina; Model, J. B.*; Aranyosi, A. J.*; Ghaffari, R.*; Rogers, J. A.*
EcoMat (Internet), 5(1), p.e12270_1 - e12270_18, 2023/01
Times Cited Count:38 Percentile:92.75(Chemistry, Physical)Advanced capabilities in noninvasive, in situ monitoring of sweat serve as the basis for obtaining real-time insights into human physiological state, health, and performance. Although recently reported microfluidic systems support powerful functions, most are designed as single-use disposables. Here, we introduce materials and molding techniques that bypass these concerns through biodegradable microfluidic systems with a full range of features. The key components fully degrade through the enzymatic action of microorganisms in natural soil environments. Detailed characterization of the device reveal a set of essential performance parameters that are comparable to, or even better than, those of non-degradable counterparts. Human subject studies illustrate the ability of these devices to acquire accurate measurements of sweat loss, sweat rate, pH, and chloride concentration.
Tripathi, R.*; Adroja, D. T.*; Ritter, C.*; Sharma, S.*; Yang, C.*; Hillier, A. D.*; Koza, M. M.*; Demmel, F.*; Sundaresan, A.*; Langridge, S.*; et al.
Physical Review B, 106(6), p.064436_1 - 064436_17, 2022/08
Times Cited Count:8 Percentile:59.76(Materials Science, Multidisciplinary)Fujita, Yoshitaka; Seki, Misaki; Ngo, M. C.*; Do, T. M. D.*; Hu, X.*; Yang, Y.*; Takeuchi, Tomoaki; Nakano, Hiroko; Fujihara, Yasuyuki*; Yoshinaga, Hisao*; et al.
KURNS Progress Report 2021, P. 118, 2022/07
no abstracts in English
Furuike, Yoshihiko*; Ouyang, D.*; Tominaga, Taiki*; Matsuo, Tatsuhito*; Mukaiyama, Atsushi*; Kawakita, Yukinobu; Fujiwara, Satoru*; Akiyama, Shuji*
Communications Physics (Internet), 5(1), p.75_1 - 75_12, 2022/04
Times Cited Count:7 Percentile:59.84(Physics, Multidisciplinary)Gao, D.*; Tang, X.*; Wang, X.*; Yang, X.*; Zhang, P.*; Che, G.*; Han, J.*; Hattori, Takanori; Wang, Y.*; Dong, X.*; et al.
Physical Chemistry Chemical Physics, 23(35), p.19503 - 19510, 2021/09
Times Cited Count:7 Percentile:37.22(Chemistry, Physical)Pressure-induced phase transition and polymerization of nitrogen-rich molecules are widely focused due to its extreme importance for the development of green high energy density materials. Here, we present a study of the phase transition and chemical reaction of 1H-tetrazole up to 100 GPa by using Raman, IR, X-ray diffraction, neutron diffraction techniques and theoretical calculation. A phase transition above 2.6 GPa was identified and the high-pressure structure was determined with one molecule in a unit cell. The 1H-tetrazole polymerizes reversibly below 100 GPa, probably through a carbon-nitrogen bonding instead of nitrogen-nitrogen bonding. Our studies updated the structure model of the high pressure phase of 1H-tetrazole, and presented the possible intermolecular bonding route for the first time, which gives new insights to understand the phase transition and chemical reaction of nitrogen-rich compounds, and benefit for designing new high energy density materials.
Tanaka, Junki*; Yang, Z.*; Typel, S.*; Adachi, Satoshi*; Bai, S.*; van Beek, P.*; Beaumel, D.*; Fujikawa, Yuki*; Han, J.*; Heil, S.*; et al.
Science, 371(6526), p.260 - 264, 2021/01
Times Cited Count:72 Percentile:99.32(Multidisciplinary Sciences)By employing quasi-free -cluster-knockout reactions, we obtained direct experimental evidence for the formation of
clusters at the surface of neutron-rich tin isotopes. The observed monotonous decrease of the reaction cross sections with increasing mass number, in excellent agreement with the theoretical prediction, implies a tight interplay between
-cluster formation and the neutron skin.
Martin, P. G.*; Louvel, M.*; Cipiccia, S.*; Jones, C. P.*; Batey, D. J.*; Hallam, K. R.*; Yang, I. A. X.*; Satou, Yukihiko; Rau, C.*; Mosselmans, J. F. W.*; et al.
Nature Communications (Internet), 10, p.2801_1 - 2801_7, 2019/06
Times Cited Count:33 Percentile:80.28(Multidisciplinary Sciences)Synchrotron radiation (SR) analysis techniques alongside secondary ion mass spectrometry (SIMS) measurements have been made on sub-mm particulate material derived from reactor Unit 1 of the Fukushima Daiichi Nuclear Power Plant (FDNPP). Using these methods, it has been possible to investigate the distribution, state and isotopic composition of micron-scale U particulate contained within the larger Si-based ejecta material. Through combined SR micro-focused X-ray fluorescence (SR-micro-XRF) and absorption contrast SR micro-focused X-ray tomography (SR-micro-XRT), the U particulate was found to be located around the exterior circumference of the highly-porous particle. Synchrotron radiation micro-focused X-ray absorption near edge structure (SR-micro-XANES) analysis of a number of these entrapped particles revealed them to exist within the U(IV) oxidation state, as UO, and identical in structure to reactor fuel. Confirmation that this U was of nuclear origin (
U-enriched) was provided through secondary ion mass spectrometry (SIMS) analysis with an isotopic enrichment ratio characteristic of a provenance from reactor Unit 1 at the FDNPP. These results provide clear evidence of the event scenario (that a degree of core fragmentation and release occurred from reactor Unit 1), with such spent fuel ejecta existing; (i) within the stable U(IV) oxidation state; and (ii) contained within a bulk Si-based particle. While this U is unlikely to represent an environmental or health hazard, such assertions would likely change, however, should break-up of the Si-containing bulk particle occur. However, more important to the long-term decommissioning of the reactors (and clean-up) on the FDNPP, is the knowledge that core integrity of reactor Unit 1 was compromised with nuclear material existing outside of the reactors primary containment.
Samarakoon, A. M.*; Takahashi, Mitsuru*; Zhang, D.*; Yang, J.*; Katayama, Naoyuki*; Sinclair, R.*; Zhou, H. D.*; Diallo, S. O.*; Ehlers, G.*; Tennant, D. A.*; et al.
Scientific Reports (Internet), 7(1), p.12053_1 - 12053_8, 2017/09
Times Cited Count:11 Percentile:58.95(Multidisciplinary Sciences)Ye, M.*; Li, W.*; Zhu, S.-Y.*; Takeda, Yukiharu; Saito, Yuji; Wang, J.*; Pan, H.*; Nurmamat, M.*; Sumida, Kazuki*; Ji, F.*; et al.
Nature Communications (Internet), 6, p.8913_1 - 8913_7, 2015/11
Times Cited Count:60 Percentile:90.36(Multidisciplinary Sciences)Magnetically doped topological insulators are predicted to exhibit exotic phenomena including the quantized anomalous Hall effect and a dissipationless transport, which facilitate the development of low-power-consumption devices using electron spins. The realization of the quantized anomalous Hall effect is so far restricted to the Cr-doped (Sb,Bi)Te
system at extremely low temperature; however, the microscopic origin of its ferromagnetism is poorly understood. Here we present an element-resolved study for Cr-doped (Sb,Bi)
Te
using X-ray magnetic circular dichroism to unambiguously show that the long-range magnetic order is mediated by the p-hole carriers of the host lattice, and the interaction between the Sb(Te) p and Cr d states is crucial.
Lipschultz, B.*; Asakura, Nobuyuki; Bonnin, X.*; Coster, D. P.*; Counsell, G.*; Doerner, R.*; Dux, R.*; Federici, G.*; Fenstermacher, M. E.*; Fundamenski, W.*; et al.
Proceedings of 21st IAEA Fusion Energy Conference (FEC 2006) (CD-ROM), 8 Pages, 2007/03
The work of the ITPA SOL/divertor group is reviewed. The high-n nature of ELMs has been elucidated and new measurements have determined that they carry 10-20% of the ELM energy to the far SOL with implications for ITER limiters and the upper divertor. Analysis of ELM measurements imply that the ELM continuously loses energy as it travels across the SOL. The prediction of ITER divertor disruption power loads have been reduced as a result of finding that the divertor footprint broadens during the thermal quench and that the plasma can lose up to 80% of its thermal energy before the thermal quench (not for VDEs or ITBs). Disruption mitigation through massive gas puffing has been successful at reducing divertor heat loads but estimates of the effect on the main chamber walls indicate 10s of kG of Be would be melted/mitigation. Long-pulse studies have shown that the fraction of injected gas that can be recovered after a discharge decreases with discharge length. The use of mixed materials gives rise to a number of potential processes.
Arai, Yosuke*; Kuroda, Kenta*; Tsutsui, Satoshi*; Hirai, Daigoro*; Tanaka, Hiroaki*; Yuyang, D.*; Iwata, Takuma*; Katayama, Kazu*; Shin, S.*; Kubota, Masato; et al.
no journal, ,
no abstracts in English