Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Sakasegawa, Hideo; Nomura, Mitsuo; Sawayama, Kengo; Nakayama, Takuya; Yaita, Yumi*; Yonekawa, Hitoshi*; Kobayashi, Noboru*; Arima, Tatsumi*; Hiyama, Toshiaki*; Murata, Eiichi*
Progress in Nuclear Energy, 153, p.104396_1 - 104396_9, 2022/11
Times Cited Count:0 Percentile:0.01(Nuclear Science & Technology)When dismantling centrifuges in uranium-enrichment facilities, decontamination techniques must be developed to remove uranium-contaminated surfaces of dismantled parts selectively. Dismantled uranium-contaminated parts can be disposed of as nonradioactive wastes or recycled after decontamination appropriate for clearance. previously, we developed a liquid decontamination technique using acidic electrolyzed water to remove uranium-contaminated surfaces. However, further developments are still needed for its actual application. Dismantled parts have various uranium-contaminated surface features due to varied operational conditions, inhomogeneous decontamination using iodine heptafluoride gas, and changes in long-term storage conditions after dismantling. Here, we performed liquid decontamination on specimens with varying uranium-contaminated surfaces cut from a centrifuge made of low-carbon steel. From the results, the liquid decontamination can effectively remove the uranium-contaminated surfaces, and radioactive concentrations fell below the target value within twenty minutes. Although the required time should also depend on dismantled parts' sizes and shapes in their actual application, we demonstrated that it could be an effective decontamination technique for uranium-contaminated steels of dismantled centrifuges.
Shimizu, Akira; Ohashi, Hirofumi; Kato, Michio; Hayashi, Koji; Aita, Hideki; Nishihara, Tetsuo; Inaba, Yoshitomo; Takada, Shoji; Morisaki, Norihiro; Sakaki, Akihiro*; et al.
JAERI-Tech 2005-031, 174 Pages, 2005/06
Connection of hydrogen production system by steam reforming of methane to the High Temperature Engineering Test Reactor (HTTR) of the Japan Atomic Energy Research Institute (JAERI) has been surveyed until now. Mock-up test facility of this steam reforming system with full-scale reaction tube was constructed in FY 2001, and a lot of operational test data on heat exchanges were obtained in these tests.In this report specifications, structures and heat transfer formulae of steam reformer, steam superheater, steam generator, condenser, helium gas cooler, feed gas heater and feed gas superheater were described. Evaluation codes were newly made to evaluate heat transfer characteristics from measured test data. Overall heat-transfer coefficient obtained from the experimental data were compared and evaluated with the prospective value calculated with heat transfer formulae. As a result, heat transfer performance and thermal efficiency of these heat exchangers were confirmed to be appropriate.
Sakaki, Akihiro*; Kato, Michio; Hayashi, Koji; Fujisaki, Katsuo*; Aita, Hideki; Ohashi, Hirofumi; Takada, Shoji; Shimizu, Akira; Morisaki, Norihiro; Maeda, Yukimasa; et al.
JAERI-Tech 2005-023, 72 Pages, 2005/04
In order to establish the system integration technology to connect a hydrogen production system to a high temperature gas cooled reactor, the mock-up test facility with a full-scale reaction tube for the steam reforming HTTR hydrogen production system was constructed in fiscal year 2001 and its functional test operation was performed in the year. Seven experimental test operations were performed from fiscal year 2001 to 2004. On a period of each test operation, there happened some troubles. For each trouble, the cause was investigated and the countermeasures and the improvement works were performed to succeed the experiments. The tests were successfully achieved according to plan.This report describes the improvement works on the test facility performed from fiscal year 2001 to 2004.