Refine your search:     
Report No.
 - 
Search Results: Records 1-20 displayed on this page of 168

Presentation/Publication Type

Initialising ...

Refine

Journal/Book Title

Initialising ...

Meeting title

Initialising ...

First Author

Initialising ...

Keyword

Initialising ...

Language

Initialising ...

Publication Year

Initialising ...

Held year of conference

Initialising ...

Save select records

JAEA Reports

Basic policy for rational measures of radioactive waste processing and disposal; Results of studies for acceleration of waste processing

Nakagawa, Akinori; Oyokawa, Atsushi; Murakami, Masashi; Yoshida, Yukihiko; Sasaki, Toshiki; Okada, Shota; Nakata, Hisakazu; Sugaya, Toshikatsu; Sakai, Akihiro; Sakamoto, Yoshiaki

JAEA-Technology 2021-006, 186 Pages, 2021/06

JAEA-Technology-2021-006.pdf:54.45MB

Radioactive wastes generated from R&D activities have been stored in Japan Atomic Energy Agency. In order to reduce the risk of taking long time to process legacy wastes, countermeasures for acceleration of waste processing and disposal were studied. Work analysis of waste processing showed bottleneck processes, such as evaluation of radioactivity concentration, segregation of hazardous and combustibles materials. Concerning evaluation of radioactivity concentration, a radiological characterization method using a scaling factor and a nondestructive gamma-ray measurement should be developed. The number of radionuclides that are to be selected for the safety assessment of the trench type disposal facility can decrease using artificial barriers. Hazardous materials, will be identified using records and nondestructive inspection. The waste identified as hazardous will be unpacked and segregated. Preliminary calculations of waste acceptance criteria of hazardous material concentrations were conducted based on environmental standards in groundwater. The total volume of the combustibles will be evaluated using nondestructive inspection. The waste that does not comply with the waste acceptance criteria should be mixed with low combustible material waste such as dismantling concrete waste in order to satisfy the waste acceptance criteria on a disposal facility average. It was estimated that segregation throughput of compressed waste should be increased about 5 times more than conventional method by applying the countermeasures. Further study and technology development will be conducted to realize the plan.

Journal Articles

Measurement of displacement cross section for proton in the kinetic energy range from 0.4 GeV to 3 GeV

Meigo, Shinichiro; Matsuda, Hiroki; Iwamoto, Yosuke; Yoshida, Makoto*; Hasegawa, Shoichi; Maekawa, Fujio; Iwamoto, Hiroki; Nakamoto, Tatsushi*; Ishida, Taku*; Makimura, Shunsuke*

JPS Conference Proceedings (Internet), 33, p.011050_1 - 011050_6, 2021/03

R&D of the beam window is crucial in the ADS, which serves as a partition between the accelerator and the target region. Although the displacement per atom (DPA) is used to evaluate the damage on the window, experimental data on the displacement cross section is scarce in the energy region above 20 MeV. We started to measure the displacement cross section for the protons in the energy region between 0.4 to 3 GeV. The displacement cross section can be derived by resistivity change divided by the proton flux and the resistivity change per Frankel pair on cryo-cooled sample to maintain damage. Experiments were conducted at the 3 GeV proton synchrotron at the J-PARC Center, and aluminum and copper was used as samples. As a result of comparison between the present experiment and the calculation of the NRT model, which is widely used for calculation of the displacement cross section, it was found that the calculation of the NRT model overestimated the experiment by about 3 times.

Journal Articles

Measurements of displacement cross section of tungsten under 389-MeV proton irradiation and thermal damage recovery

Iwamoto, Yosuke; Yoshida, Makoto*; Matsuda, Hiroki; Meigo, Shinichiro; Satoh, Daiki; Yashima, Hiroshi*; Yabuuchi, Atsushi*; Shima, Tatsushi*

Materials Science Forum, 1024, p.95 - 101, 2021/03

To predict the lifetime of target materials in high-energy radiation environments at spallation neutron sources, radiation transport codes such as PHITS are used to calculate the displacements per atom (DPA) value. In this work, to validate calculated DPA values of tungsten, we implemented 0.25-mm-diameter wire sample of tungsten in a proton irradiation device with a Gifford-McMahon cryocooler and measured the defect-induced electrical resistivity changes related to the displacement cross section using 389-MeV protons at 10 K. As well as our previous results for aluminum and copper, calculated results with defect production efficiencies provided good agreements with experimental data. Based on measurements of recovery of the defects through annealing, about 85% of the damage remained at 60 K, and the same tendency is observed in other experimental result for reactor neutron irradiation.

Journal Articles

Morphological reproductive characteristics of testes and fertilization capacity of cryopreserved sperm after the Fukushima accident in raccoon (${it Procyon lotor}$)

Komatsu, Kazuki*; Iwasaki, Tsugumi*; Murata, Kosuke*; Yamashiro, Hideaki*; Goh, V. S. T.*; Nakayama, Ryo*; Fujishima, Yohei*; Ono, Takumi*; Kino, Yasushi*; Shimizu, Yoshinaka*; et al.

Reproduction in Domestic Animals, 56(3), p.484 - 497, 2021/03

We have established an archive system of livestock and wild animals from the surrounding ex-evacuation zone. Wildlife within the alert zone have been exposed to low-dose-rate (LDR) radiation for a long and continuous time. In this study, we analysed the morphological characteristics of the testes and in vitro fertilization (IVF) capacity of cryopreserved sperm of raccoons from the ex-evacuation zone of the FDNPP accident. This study revealed that the chronic and LDR radiation exposure associated with the FDNPP accident had no adverse effect on the reproductive characteristics and functions of male raccoons.

Journal Articles

Formation of $$alpha$$ clusters in dilute neutron-rich matter

Tanaka, Junki*; Yang, Z.*; Typel, S.*; Adachi, Satoshi*; Bai, S.*; Van Beek, P.*; Beaumel, D.*; Fujikawa, Yuki*; Han, J.*; Heil, S.*; et al.

Science, 371(6526), p.260 - 264, 2021/01

 Times Cited Count:8 Percentile:99.26(Multidisciplinary Sciences)

By employing quasi-free $$alpha$$-cluster-knockout reactions, we obtained direct experimental evidence for the formation of $$alpha$$ clusters at the surface of neutron-rich tin isotopes. The observed monotonous decrease of the reaction cross sections with increasing mass number, in excellent agreement with the theoretical prediction, implies a tight interplay between $$alpha$$-cluster formation and the neutron skin.

Journal Articles

Measurement of displacement cross-sections of copper and iron for proton with kinetic energies in the range 0.4 - 3 GeV

Matsuda, Hiroki; Meigo, Shinichiro; Iwamoto, Yosuke; Yoshida, Makoto*; Hasegawa, Shoichi; Maekawa, Fujio; Iwamoto, Hiroki; Nakamoto, Tatsushi*; Ishida, Taku*; Makimura, Shunsuke*

Journal of Nuclear Science and Technology, 57(10), p.1141 - 1151, 2020/10

 Times Cited Count:3 Percentile:76.41(Nuclear Science & Technology)

To estimate the structural damages of materials in accelerator facilities, displacement per atom (dpa) is widely employed as a damage index, calculated based on the displacement cross-section obtained using a calculation model. Although dpa is applied as standard, the experimental data of the displacement cross-section for a proton in the energy region above 20 MeV are scarce. Among the calculation models, difference of about factor 8 exist, so that the experimental data of the cross-section are crucial to validate the model. To obtain the displacement cross-section, we conducted experiments at J-PARC. The displacement cross-section of copper and iron was successfully obtained for a proton projectile with the kinetic energies, 0.4 - 3 GeV. The results were compared with those obtained using the widely utilized Norgertt-Robinson-Torrens (NRT) model and the athermal-recombination-corrected (arc) model based on molecular dynamics. It was found that the NRT model overestimates the present displacement cross-section by 3.5 times. The calculation results obtained using with the arc model based on the Nordlund parameter show remarkable agreement with the experimental data. It can be concluded that the arc model must be employed for the dpa calculation for the damage estimation of copper and iron.

Journal Articles

Measurement of displacement cross section of structural materials utilized in the proton accelerator facilities with the kinematic energy above 400 MeV

Meigo, Shinichiro; Matsuda, Hiroki; Iwamoto, Yosuke; Yoshida, Makoto*; Hasegawa, Shoichi; Maekawa, Fujio; Iwamoto, Hiroki; Nakamoto, Tatsushi*; Ishida, Taku*; Makimura, Shunsuke*

EPJ Web of Conferences, 239, p.06006_1 - 06006_4, 2020/09

 Times Cited Count:0 Percentile:0.19

R&D of the beam window is crucial in the ADS, which serves as a partition between the accelerator and the target region. Although the displacement per atom (DPA) is used to evaluate the damage on the window, experimental data on the displacement cross section is scarce in the energy region above 20 MeV. We started to measure the displacement cross section for the protons in the energy region between 0.4 to 3 GeV. The displacement cross section can be derived by resistivity change divided by the proton flux and the resistivity change per Frankel pair on cryo-cooled sample to maintain damage. Experiments were conducted at the 3 GeV proton synchrotron at the J-PARC Center, and copper was used as samples. As a result of comparison between the present experiment and the calculation of the NRT model, which is widely used for calculation of the displacement cross section, it was found that the calculation of the NRT model overestimated the experiment by about 3 times.

Journal Articles

Interfacial cross-link inhomogeneity of a phenolic resin on a silica surface as revealed by X-ray and neutron reflection measurements

Izumi, Atsushi*; Shudo, Yasuyuki*; Shibayama, Mitsuhiro*; Yoshida, Tessei*; Miyata, Noboru*; Miyazaki, Tsukasa*; Aoki, Hiroyuki

Macromolecules, 53(10), p.4082 - 4089, 2020/05

 Times Cited Count:4 Percentile:62.52(Polymer Science)

Journal Articles

Shell structure of the neutron-rich isotopes $$^{69,71,73}$$Co

Lokotko, T.*; Leblond, S.*; Lee, J.*; Doornenbal, P.*; Obertelli, A.*; Poves, A.*; Nowacki, F.*; Ogata, Kazuyuki*; Yoshida, Kazuki; Authelet, G.*; et al.

Physical Review C, 101(3), p.034314_1 - 034314_7, 2020/03

 Times Cited Count:4 Percentile:79.36(Physics, Nuclear)

The structures of the neutron-rich $$^{69,71,73}$$Co isotopes were investigated via ($$p,2p$$) knockout reactions at the Radioactive Isotope Beam Factory, RIKEN. Level schemes were reconstructed using the $$gamma-gamma$$ coincidence technique, with tentative spin-parity assignments based on the measured inclusive and exclusive cross sections. Comparison with shell-model calculations suggests coexistence of spherical and deformed shapes at low excitation energies in the $$^{69,71,73}$$Co isotopes.

Journal Articles

Measurement of defect-induced electrical resistivity change of tungsten wire at cryogenic temperature using high-energy proton irradiation

Iwamoto, Yosuke; Yoshida, Makoto*; Matsuda, Hiroki; Meigo, Shinichiro; Satoh, Daiki; Yashima, Hiroshi*; Yabuuchi, Atsushi*; Kinomura, Atsushi*; Shima, Tatsushi*

JPS Conference Proceedings (Internet), 28, p.061003_1 - 061003_5, 2020/02

To predict the lifetime of target materials in high-energy radiation environments at spallation neutron sources, radiation transport codes such as PHITS are used to calculate the displacements per atom (DPA) value. In this work, to validate calculated DPA values of tungsten, we implemented 0.25-mm-diameter wire sample of tungsten in a proton irradiation device with a Gifford-McMahon cryocooler and measured the defect-induced electrical resistivity changes related to the displacement cross section using 389-MeV protons at 10 K. In comparison with experimental data under 1.1 and 1.9 GeV proton irradiation, we found that damage rate of tungsten increases with proton energy due to increase the number of secondary particle s produced by nuclear reactions.

Journal Articles

Measurement of displacement cross section of structural materials utilized in the proton accelerator facilities with the kinematic energy above 400 MeV

Meigo, Shinichiro; Matsuda, Hiroki; Iwamoto, Yosuke; Yoshida, Makoto*; Hasegawa, Shoichi; Maekawa, Fujio; Iwamoto, Hiroki; Nakamoto, Tatsushi*; Ishida, Taku*; Makimura, Shunsuke*

JPS Conference Proceedings (Internet), 28, p.061004_1 - 061004_6, 2020/02

no abstracts in English

Journal Articles

Experimental study of Gamow-Teller transitions via the high-energy-resolution $$^{18}$$O($$^3$$He,$$t$$)$$^{18}$$F reaction; Identification of the low-energy "super" -Gamow-Teller state

Fujita, Hirohiko*; Fujita, Yoshitaka*; Utsuno, Yutaka; Yoshida, Kenichi*; Adachi, Tatsuya*; Algora, A.*; Csatl$'o$s, M.*; Deaven, J. M.*; Estevez-Aguado, E.*; Guess, C. J.*; et al.

Physical Review C, 100(3), p.034618_1 - 034618_13, 2019/09

AA2019-0318.pdf:1.1MB

 Times Cited Count:6 Percentile:69.53(Physics, Nuclear)

no abstracts in English

Journal Articles

Nuclear structure of $$^{76}$$Ni from the ($$p$$,$$2p$$) reaction

Elekes, Z.*; Kripk$'o$, $'A$*; Sohler, D.*; Sieja, K.*; Ogata, Kazuyuki*; Yoshida, Kazuki; Doornenbal, P.*; Obertelli, A.*; Authelet, G.*; Baba, Hidetada*; et al.

Physical Review C, 99(1), p.014312_1 - 014312_7, 2019/01

 Times Cited Count:7 Percentile:80.58(Physics, Nuclear)

The nuclear structure of the $$^{76}$$Ni nucleus was investigated by ($$p$$,$$2p$$) reaction using a NaI(Tl) array to detect the deexciting prompt $$gamma$$ rays. A new transition with an energy of 2227 keV was identified by $$gamma gamma$$ and $$gamma gamma gamma$$ coincidences. Our shell-model calculations using the Lenzi, Nowacki, Poves, and Sieja interaction produced good candidates for the experimental proton hole states in the observed energy region, and the theoretical cross sections showed good agreement with the experimental values. Although we could not assign all the experimental states to the theoretical ones unambiguously, the results are consistent with a reasonably large Z = 28 shell gap for nickel isotopes in accordance with previous studies.

Journal Articles

Measurement of displacement cross sections of aluminum and copper at 5 K by using 200 MeV protons

Iwamoto, Yosuke; Yoshida, Makoto*; Yoshiie, Toshimasa*; Satoh, Daiki; Yashima, Hiroshi*; Matsuda, Hiroki; Meigo, Shinichiro; Shima, Tatsushi*

Journal of Nuclear Materials, 508, p.195 - 202, 2018/09

 Times Cited Count:8 Percentile:81.13(Materials Science, Multidisciplinary)

To validate the displacement damage model in radiation transport codes used for the estimation of radiation damages at accelerator facilities, we measured electrical resistance increase of aluminum and copper induced by radiation defects under the cryogenic 200 MeV proton irradiation. The irradiation device had the structure to cool two irradiation samples at same time using thermal conductance. The aluminum and copper wire with 250 $$mu$$m diameter was sandwiched between two AlN plates with excellent thermal conductivity and electrical insulation. As a result, temperature of irradiation samples was kept at below 5 K under proton irradiation with beam intensity below 3 nA. The experimental displacement cross section agreed with calculated results with defect production efficiency.

Journal Articles

Radiation damage calculation in PHITS and benchmarking experiment for cryogenic-sample high-energy proton irradiation

Iwamoto, Yosuke; Matsuda, Hiroki; Meigo, Shinichiro; Satoh, Daiki; Nakamoto, Tatsushi*; Yoshida, Makoto*; Ishi, Yoshihiro*; Kuriyama, Yasutoshi*; Uesugi, Tomonori*; Yashima, Hiroshi*; et al.

Proceedings of 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB 2018) (Internet), p.116 - 121, 2018/07

The radiation damage model in the radiation transport code PHITS has been developed to calculate the basic data of the radiation damage including the energy of the target Primary Knock on Atom (PKA). For the high-energy proton incident reactions, a target PKA created by the secondary particles was more dominant than a target PKA created by the projectile. To validate the radiation damage model in metals irradiated by $$>$$100 MeV protons, we developed a proton irradiation device with a Gifford-McMahon cryocooler to cryogenically cool wire samples. By using this device, the defect-induced electrical resistivity changes related to the DPA cross section of copper and aluminum were measured under irradiation with 125 and 200 MeV protons at cryogenic temperature. A comparison of the experimental data with the calculated results indicates that the DPA cross section with defect production efficiencies provide better quantitative descriptions.

Journal Articles

Measurement of displacement cross-section for structural materials in High-Power Proton Accelerator Facility

Meigo, Shinichiro; Matsuda, Hiroki; Iwamoto, Yosuke; Iwamoto, Hiroki; Hasegawa, Shoichi; Maekawa, Fujio; Yoshida, Makoto*; Ishida, Taku*; Makimura, Shunsuke*; Nakamoto, Tatsushi*

Proceedings of 9th International Particle Accelerator Conference (IPAC '18) (Internet), p.499 - 501, 2018/06

no abstracts in English

Journal Articles

Determination of fusion barrier distributions from quasielastic scattering cross sections towards superheavy nuclei synthesis

Tanaka, Taiki*; Narikiyo, Yoshihiro*; Morita, Kosuke*; Fujita, Kunihiro*; Kaji, Daiya*; Morimoto, Koji*; Yamaki, Sayaka*; Wakabayashi, Yasuo*; Tanaka, Kengo*; Takeyama, Mirei*; et al.

Journal of the Physical Society of Japan, 87(1), p.014201_1 - 014201_9, 2018/01

 Times Cited Count:10 Percentile:72.43(Physics, Multidisciplinary)

Excitation functions of quasielastic scattering cross sections for the $$^{48}$$Ca + $$^{208}$$Pb, $$^{50}$$Ti + $$^{208}$$Pb, and $$^{48}$$Ca + $$^{248}$$Cm reactions were successfully measured by using the gas-filled recoil-ion separator GARIS. Fusion barrier distributions were extracted from these data, and compared with the coupled-channels calculations. It was found that the peak energies of the barrier distributions for the $$^{48}$$Ca + $$^{208}$$Pb and $$^{50}$$Ti + $$^{208}$$Pb systems coincide with those of the 2n evaporation channel cross sections for the systems, while that of the $$^{48}$$Ca + $$^{248}$$Cm is located slightly below the 4n evaporation ones. This results provide us helpful information to predict the optimum beam energy to synthesize superheavy nuclei.

Journal Articles

Study of the reaction $$^{48}$$Ca + $$^{248}$$Cm $$rightarrow$$ $$^{296}$$Lv$$^{ast}$$ at RIKEN-GARIS

Kaji, Daiya*; Morita, Kosuke*; Morimoto, Koji*; Haba, Hiromitsu*; Asai, Masato; Fujita, Kunihiro*; Gan, Z.*; Geissel, H.*; Hasebe, Hiroo*; Hofmann, S.*; et al.

Journal of the Physical Society of Japan, 86(3), p.034201_1 - 034201_7, 2017/03

 Times Cited Count:16 Percentile:79.57(Physics, Multidisciplinary)

The fusion reaction of $$^{48}$$Ca + $$^{248}$$Cm $$rightarrow$$ $$^{296}$$Lv$$^{ast}$$ was studied using the gas-filled recoil-ion separator GARIS at RIKEN. A total of seven $$alpha$$ and spontaneous-fission decay chains were observed, which would originate from the reaction products of the element 116, $$^{292}$$Lv and $$^{293}$$Lv. Decay properties observed in the chains are in good agreement with the previously published ones. However, one of the chains showed a discrepancy, indicating the new spontaneous-fission branch in $$^{285}$$Cn or the production of the new isotope $$^{294}$$Lv.

Journal Articles

Evaluation of dark current profile for prediction of voltage holding capability on multi-aperture multi-grid accelerator for ITER

Nishikiori, Ryo; Kojima, Atsushi; Hanada, Masaya; Kashiwagi, Mieko; Watanabe, Kazuhiro; Umeda, Naotaka; Tobari, Hiroyuki; Yoshida, Masafumi; Ichikawa, Masahiro; Hiratsuka, Junichi; et al.

Plasma and Fusion Research (Internet), 11, p.2401014_1 - 2401014_4, 2016/03

One of critical issues for high-energy high-current beam acceleration in ITER and JT-60SA is the high voltage holding which is dominated by vacuum discharges. The past results suggest that vacuum discharge occurs beyond the threshold of the dark current. The dark current can be derived from F-N theory where electric field enhancement factor beta is included. Though, beta could only be evaluated from the experiment previously. Therefore, the method to decide beta without experiment is required. This time dark currents were measured at three different areas to compare beta in different electric field. As a result, the effective electric field $$beta$$E, where E is average electric field, were found to be almost constant for different areas although the beta is largely different. By applying $$beta$$E, beta can be evaluated analytically, leading to the analytical prediction of the dark current and voltage holding capability without the measurements.

Journal Articles

Progress report of Japanese simulation research projects using the high-performance computer system Helios in the International Fusion Energy Research Centre

Ishizawa, Akihiro*; Idomura, Yasuhiro; Imadera, Kenji*; Kasuya, Naohiro*; Kanno, Ryutaro*; Satake, Shinsuke*; Tatsuno, Tomoya*; Nakata, Motoki*; Nunami, Masanori*; Maeyama, Shinya*; et al.

Purazuma, Kaku Yugo Gakkai-Shi, 92(3), p.157 - 210, 2016/03

The high-performance computer system Helios which is located at The Computational Simulation Centre (CSC) in The International Fusion Energy Research Centre (IFERC) started its operation in January 2012 under the Broader Approach (BA) agreement between Japan and the EU. The Helios system has been used for magnetised fusion related simulation studies in the EU and Japan and has kept high average usage rate. As a result, the Helios system has contributed to many research products in a wide range of research areas from core plasma physics to reactor material and reactor engineering. This project review gives a short catalogue of domestic simulation research projects. First, we outline the IFERC-CSC project. After that, shown are objectives of the research projects, numerical schemes used in simulation codes, obtained results and necessary computations in future.

168 (Records 1-20 displayed on this page)