Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Li, L.*; 宮本 吾郎*; Zhang, Y.*; Li, M.*; 諸岡 聡; 及川 勝成*; 友田 陽*; 古原 忠*
Journal of Materials Science & Technology, 184, p.221 - 234, 2024/06
被引用回数：0 パーセンタイル：0(Materials Science, Multidisciplinary)Dynamic transformation (DT) of austenite (
) to ferrite (
) in the hot deformation of various carbon steels was widely investigated. However, the nature of DT remains unclear due to the lack of quantitative analysis of stress partitioning between two phases and the uncertainty of local distribution of substitutional elements at the interface in multi-component carbon steels used in the previous studies. Therefore, in the present study, a binary Fe-Ni alloy with + duplex microstructure in equilibrium was prepared and isothermally compressed in + two-phase region to achieve quantitative analysis of microstructure evolution, stress partitioning and thermodynamics during DT. to DT during isothermal compression and to reverse transformation on isothermal annealing under unloaded condition after deformation were accompanied by Ni partitioning. The lattice strains during thermomechanical processing were obtained via in-situ neutron diffraction measurement, based on which the stress partitioning behavior between and was discussed by using the generalized Hooke's law. A thermodynamic framework for the isothermal deformation in solids was established based on the basic laws of thermodynamics, and it was shown that the total Helmholtz free energy change in the deformable material during the isothermal process should be smaller than the work done to the deformable material. Under the present thermodynamic framework, the microstructure evolution in the isothermal compression of Fe-14Ni alloy was well explained by considering the changes in chemical free energy, plastic and elastic energies and the work done to the material. In addition, the stabilization of the soft phase in Fe-14Ni alloy by deformation was rationalized since the to transformation decreased the total Helmholtz free energy by decreasing the elastic and dislocation energies.
Baccou, J.*; Glantz, T.*; Ghione, A.*; Sargentini, L.*; Fillion, P.*; Damblin, G.*; Sueur, R.*; Iooss, B.*; Fang, J.*; Liu, J.*; et al.
Nuclear Engineering and Design, 421, p.113035_1 - 113035_16, 2024/05
In the Best-Estimate Plus Uncertainty (BEPU) framework, the use of best-estimate code requires to go through a Verification, Validation and Uncertainty Quantification process (VVUQ). The relevance of the experimental data in relation to the physical phenomena of interest in the VVUQ process is crucial. Adequacy analysis of selected experimental databases addresses this problem. The outcomes of the analysis can be used to select a subset of relevant experimental data, to encourage designing new experiments or to drop some experiments from a database because of their substantial lack of adequacy. The development of a specific transparent and reproducible approach to analyze the relevance of experimental data for VVUQ still remains open and is the topic of this contribution. In this paper, the concept of adequacy initially introduced in the OECD/NEA SAPIUM (Systematic APproach for model Input Uncertainty quantification Methodology) activity is formalized. It is defined through two key properties, called representativeness and completeness, that allows considering the multifactorial dimension of the adequacy problem. A new systematic approach is then proposed to analyze the adequacy of a set of experimental databases. It relies on the introduction of two sets of criteria to characterize representativeness and completeness and on the use of multi-criteria decision analysis method to perform the analysis. Finally, the approach is applied in the framework of the new OECD/NEA ATRIUM activity which includes a set of practical IUQ exercises in thermal-hydraulics to test the SAPIUM guideline in determining input uncertainties and forward propagating them on an application case. It allows evaluating the adequacy of eight experimental databases coming from the Super Moby-dick, Sozzi-Sutherland and Marviken experiments and identifying the most adequate ones.
-MgAgSbLi, J.*; Li, X.*; Zhang, Y.*; Zhu, J.*; Zhao, E.*; 古府 麻衣子; 中島 健次; Avdeev, M.*; Liu, P.-F.*; Sui, J.*; et al.
Applied Physics Reviews (Internet), 11(1), p.011406_1 - 011406_8, 2024/03
被引用回数：0 パーセンタイル：0.01(Physics, Applied)The desire for intrinsically low lattice thermal conductivity (
) in thermoelectrics motivates numerous efforts on understanding the microscopic mechanisms of heat transport in solids. Here, based on theoretical calculations, we demonstrate that -MgAgSb hosts low-energy localized phonon bands and avoided crossing of the rattler modes, which coincides with the inelastic neutron scattering result. Using the two-channel lattice dynamical approach, we find, besides the conventional contribution (
70% at 300 K) from particlelike phonons propagating, the coherence contribution dominated by the wavelike tunneling of phonons accounts for 30% of total at 300 K. By considering dual contributions, our calculated room-temperature of 0.64 Wm
K well agrees with the experimental value of 0.63 WmK. More importantly, our computations give a nonstandard 
dependence, perfectly explaining the abnormal temperature-trend of 
in experiment for -MgAgSb. By molecular dynamics simulation, we reveal that the structure simultaneously has soft crystalline sublattices with the metavalent bonding and fluctuating liquid-like sublattices with thermally induced large amplitude vibrations. These diverse forms of chemical bonding arouse mixed part-crystal part-liquid state, scatter strongly heat-carrying phonons, and finally produce extremely low . The fundamental research from this study will accelerate the design of ultralow- materials for energy-conversion applications.
neutron diffractionZhou, Y.*; Song, W.*; Zhang, F.*; Wu, Y.*; Lei, Z.*; Jiao, M.*; Zhang, X.*; Dong, J.*; Zhang, Y.*; Yang, M.*; et al.
Journal of Alloys and Compounds, 971, p.172635_1 - 172635_7, 2024/01
被引用回数：0 パーセンタイル：0(Chemistry, Physical)The grain orientation-dependent lattice strain evolution of a (TiZrHfNb)
refractory high-entropy alloy (HEA) during tensile loading has been investigated using neutron diffraction. The equivalent strain-hardening rate of each of the primary 
-oriented grain families was found to be relatively low, manifesting the macroscopically weak work-hardening ability of such a body-centered cubic (BCC)-structured HEA. This finding is indicative of a dislocation planar slip mode that is confined in a few single-slip planes and leads to in-plane softening by high pile-up stresses.
-Ti alloyZhang, B.*; Xin, S.*; Huang, M.*; Mao, W.; Jia, W.*; Li, Q.*; Li, S.*; Zhang, S.*; Mao, C.*
Materials Science & Engineering A, 890, p.145898_1 - 145898_7, 2024/01
被引用回数：0 パーセンタイル：0(Nanoscience & Nanotechnology)本研究では、高Zr--Ti合金の変形温度を300Kから77Kに下げると回復ひずみが2.25%から5.5%に大幅に増加することを報告した。この合金の超弾性は77Kにおいて粒径に依存しないことがわかった。その結果、粗粒試料は77Kで超微粒試料とほぼ同じ超弾性を示すことがわかった。変形誘起マルテンサイト変態と転位すべりの相対的な容易さは77Kで大きく変化し、転位すべりは強く抑制され、超弾性に対する結晶粒の微細化の影響は影を潜めた。
Hu, Q.*; Wang, Q. M.*; Zhang, T.*; Zhao, C.*; Iltaf, K. H.*; Liu, S. Q.*; 深津 勇太
Energy Reports (Internet), 9, p.3661 - 3682, 2023/12
被引用回数：3 パーセンタイル：78.24(Energy & Fuels)This study evaluates petrophysical properties of representative geological rocks in the context of injectivity, storage space, and caprock integrity for effective utilization and long-term storage of carbon dioxide. A total of 10 geological rocks were selected as representative storage media for consideration as saline aquifers & depleted oil and gas reservoirs, basalts, and cap rocks, as well as utilization in organic-rich shale and coal seams. An integrated suite of laboratory tests, including liquid immersion porosimetry, gas expansion porosimetry, grain size distribution, mercury intrusion porosimetry, and gas diffusion, were performed on these various rock samples. The results exhibit a disparity of petrophysical properties among two broad groups of rocks: rocks selected for possible storage of CO
have porosities of 10-25%, permeabilities of 10
-10
m
, 
m-sized pore-throat size distribution, and mostly good pore connectivity; in contrast, the potential caprocks have porosities of 0.5-5%, permeabilities of 10
-10
m, pore throat sizes of 
50 nm, and probably poorly connected pore networks. An understanding of the measured facets of pore structure and contribution of fractures is also critical in the context of different testing principles and data interpretation of petrophysical analyses, as well as observational scales in the laboratory and field, and therefore reliable confidence of CO storage and utilization performance. Our work further illustrates the controlling influence of grain size distribution and geological processes on pore size distribution and pore connectivity for a wide range of rock types and lithologies, and particularly presents the extent and behavior of CO gas diffusion with a custom-designed apparatus for a holistic understanding of various petrophysical attributes of widely different geological rocks.
TaSPark, P.*; Cho, W.*; Kim, C.*; An, Y.*; Kang, Y.-G.*; Avdeev, M.*; Sibille, R.*; 飯田 一樹*; 梶本 亮一; Lee, K. H.*; et al.
Nature Communications (Internet), 14, p.8346_1 - 8346_9, 2023/12
被引用回数：0 パーセンタイル：0(Multidisciplinary Sciences)The triangular lattice antiferromagnet (TLAF) has been the standard paradigm of frustrated magnetism for several decades. The most common magnetic ordering in insulating TLAFs is the 120
structure. However, a new triple-
chiral ordering can emerge in metallic TLAFs, representing the short wavelength limit of magnetic skyrmion crystals. We report the metallic TLAF CoTaS as the first example of tetrahedral triple- magnetic ordering with the associated topological Hall effect (non-zero 
). We also present a theoretical framework that describes the emergence of this magnetic ground state, which is further supported by the electronic structure measured by angle-resolved photoemission spectroscopy. Additionally, our measurements of the inelastic neutron scattering cross section are consistent with the calculated dynamical structure factor of the tetrahedral triple- state.
Esser, S. P.*; Rahlff, J.*; Zhao, W.*; Predl, M.*; Plewka, J.*; Sures, K.*; Wimmer, F.*; Lee, J.*; Adam, P. S.*; McGonigle, J.*; et al.
Nature Microbiology (Internet), 8(9), p.1619 - 1633, 2023/09
被引用回数：2 パーセンタイル：79.73(Microbiology)CRISPR-Cas systems defend prokaryotic cells from viruses, plasmids, and other mobile genetic elements. Capitalizing on multi-omics approaches, we show here that the CRISPR-Cas systems of uncultivated archaea also play an integral role in mitigating potentially detrimental interactions with episymbionts. A comprehensive analysis of CRISPR-Cas-based infection histories revealed that uncultivated deep-subsurface archaeal primary-producers defend themselves from archaeal episymbionts of the DPANN superphylum of archaea, some of which are known to fuse their membranes with their host. We show that host cells counter these attacks by deploying one of two CRISPR-Cas systems (type I-B and type III-A) to target and disrupt essential genes in the episymbiont. However, genome-scale modeling of metabolic interactions between two deep subsurface host-symbiont systems revealed that host cells also benefit from the symbionts via metabolic complementation. We speculate that populations of these uncultivated archaeal episymbionts are currently transitioning from a parasitic lifestyle to one of mutualism, as must have occurred in countless mutualistic systems known today. By expanding our analysis to thousands of archaeal genomes, we conclude that CRISPR-Cas mediated resistance to archaeal episymbiosis evolved independently in various archaeal lineages and may be a wide-spread evolutionary phenomenon.
Jiang, X.*; 服部 高典; Xu, X.*; Li, M.*; Yu, C.*; Yu, D.*; Mole, R.*; 矢野 真一郎*; Chen, J.*; He, L.*; et al.
Materials Horizons, 10(3), p.977 - 982, 2023/03
被引用回数：5 パーセンタイル：87.86(Chemistry, Multidisciplinary)現在の蒸気圧縮式冷凍機に代わる環境に優しい冷凍機として、バロカロリック効果に基づく固体冷凍機が世界的に注目されている。一般に、バロカロリック効果が発現する相はいずれも常圧でも存在する。ここでは、それらの物質と違って、KPF
が高圧の菱面体晶相を生成することにより、巨大なバロカロリック効果を示すことを実証した。相図は、圧力依存の熱量測定、ラマン散乱測定、中性子回折測定に基づいて構築されたものである。本研究は、巨大バロカロリー効果に、高圧相の生成という新たな手法をもたらすと期待される。
Chong, Y.*; Gholizadeh, R.*; 都留 智仁; Zhang, R.*; 井上 耕治*; Gao, W.*; Godfrey, A.*; 光原 昌寿*; Morris, J. W. Jr.*; Minor, A. M.*; et al.
Nature Communications (Internet), 14, p.404_1 - 404_11, 2023/02
被引用回数：6 パーセンタイル：93.59(Multidisciplinary Sciences)チタンは格子間酸素によって脆化する。特に極低温では顕著な脆化挙動を示すため、チタンやその合金の製造において酸素含有量を厳しく管理する必要がある。この問題を解決するために、我々は結晶粒の微細化という構造戦略を提案した。77Kで非常に脆い粗粒の組織と比較して、Ti-0.3wt.%Oの超微細粒(UFG)組織(粒径2.0m)は、UFG組織特有の超高降伏強度を維持したまま均一延びを1桁上昇させることに成功した。UFG Ti-0.3wt.%Oにおけるこの特異な強度-延性相乗効果は、粒界凝集エネルギー向上に寄与する希薄な酸素の粒界偏析と優れたひずみ硬化能に寄与する
転位の活性化の複合効果によって達成された。この方法は、低温での高強度Ti-O合金の応用の可能性を高めるだけでなく、格子間固溶硬化による延性の低下を生じる他の合金系にも適用できる可能性がある。
Chen, J.*; 山本 慧; Zhang, J.*; Ma, J.*; Wang, H.*; Sun, Y.*; Chen, M.*; Ma, J.*; Liu, S.*; Gao, P.*; et al.
Physical Review Applied (Internet), 19(2), p.024046_1 - 024046_9, 2023/02
被引用回数：4 パーセンタイル：90.23(Physics, Applied)Coherent coupling in magnon based hybrid system has many potential applications in quantum information processing. Magnons can propagate in magnetically ordered materials without any motion of electrons, offering a unique method to build low-power-consumption devices and information channels free of heat dissipation. In this article, we demonstrate the coherent propagation of hybridized modes between spin waves and Love surface acoustic waves in a multiferroic BiFeO
and ferromagnetic La
Sr
MnO based heterostructure. The magneto-elastic coupling enables a giant enhancement of strength of the hybridized mode by a factor of 26 compared to that of the pure spin waves. A short wavelength down to 250 nm is demonstrated for the hybridized mode, which is desirable for nanoscale acousto-magnonic applications. Our combined experimental and theoretical analyses represent an important step towards the coherent control in hybrid magnonics, which may inspire the study of magnon-phonon hybrid systems for coherent information processing and manipulation.
Liu, B.*; Feng, R.*; Busch, M.*; Wang, S.*; Wu, H.*; Liu, P.*; Gu, J.*; Bahadoran, A.*; 松村 大樹; 辻 卓也; et al.
ACS Nano, 16(9), p.14121 - 14133, 2022/09
被引用回数：49 パーセンタイル：98.33(Chemistry, Multidisciplinary)Pt single-atom materials possess an ideal atom economy but suffer from limited intrinsic activity and side reaction of producing HO in catalyzing the oxygen reduction reaction (ORR). Here, we demonstrate that anchoring platinum alloys on single-atom Pt-decorated carbon (Pt- SAC) surmounts their inherent deficiencies, thereby enabling a complete four-electron ORR pathway catalysis with high efficiency and durability. PtCo@Pt-SAC demonstrates an exceptional mass and specific activities 1 order of magnitude higher than those of commercial Pt/C. They are durable throughout 50000 cycles, showing only a 10 mV decay in halfwave potential. The superior durability is attributed to the shielding effect of the Pt-SAC coating, which significantly mitigates the dissolution of PtCo cores.
Khalil, A. M. E.*; Han, L.*; Maamoun, I.; Tabish, T. A.*; Chen, Y.*; Eljamal, O.*; Zhang, S.*; Butler, D.*; Memon, F. A.*
Advanced Sustainable Systems (Internet), 6(8), p.2200016_1 - 2200016_16, 2022/08
被引用回数：2 パーセンタイル：29.01(Green & Sustainable Science & Technology)Graphene-based materials have emerged as alternative adsorbents, but their success in removing pharmaceutical contaminants has been limited due to degradation caused by restacking and limited control over their sizes and porosities. Driven by this issue, in the current study, to counteract the restacking behavior, graphene sheets are supported on a thread/rod-like matrix structure in a boron nitride foam material, and a novel porous composite foam-supported graphene is synthesized. The as-prepared novel composite offers extraordinary features, such as high absorption kinetics, large available surface area, high porosity, ecofriendliness and cost-effective synthesis, and excellent affinity to emerging pharmaceutical contaminants. When batch-testing graphene-based foam material and porous graphene nanosheets to remove gemfibrozil (GEM) from wastewater samples, rapid adsorption kinetics (less than 5 min) are exhibited by the graphene-based foam. Column filter studies are conducted for both materials to test their performance in removing GEM from distilled water, synthetic graywater, and actual wastewater. Overall, the foam composite-based filter marginally outperforms the sand-supported graphene filter and significantly outperforms the unsupported graphene filter. A numerical MATLAB model is developed to simulate the reactive solute transport of GEM influent through the foam filter. Also, a formal sensitivity analysis is conducted to identify the key parameters influencing the model results.
decay of the 8
isomer in 
UZhang, M. M.*; Tian, Y. L.*; Wang, Y. S.*; Zhang, Z. Y.*; Gan, Z. G.*; Yang, H. B.*; Huang, M. H.*; Ma, L.*; Yang, C. L.*; Wang, J. G.*; et al.
Physical Review C, 106(2), p.024305_1 - 024305_6, 2022/08
被引用回数：2 パーセンタイル：52.69(Physics, Nuclear)The extremely neutron-deficient even-even uranium isotopes U were produced in the complete-fusion reactions induced by impinging 
Ar and Ca ions on 
W targets. Fusion evaporation residues were separated in flight by the gas-filled recoil separator SHANS (Spectrometer for Heavy Atoms and Nuclear Structure) and subsequently identified using the recoil--correlation method. In this paper, we report on new -decay activities with 
keV for 
U and 
keV for 
U, which decay from the 8 isomeric states of U into the 2 states of their daughter nuclei 
Th, respectively. The new results extend the systematics of the -decay fine structure for the 
= 124 and 126 even-even isotones.
Walter, H.*; Colonna, M.*; Cozma, D.*; Danielewicz, P.*; Ko, C. M.*; Kumar, R.*; 小野 章*; Tsang, M. Y. B*; Xu, J.*; Zhang, Y.-X.*; et al.
Progress in Particle and Nuclear Physics, 125, p.103962_1 - 103962_90, 2022/07
被引用回数：48 パーセンタイル：96.94(Physics, Nuclear)原子核-原子核衝突や原子核の状態方程式の研究において、反応計算モデルは重要なツールとなり、世界中で開発が進んでいる。本論文は、原子力機構のJQMD-2.0を含め、現在開発中の複数のコード開発者の協力により、これらコードを同じ条件で比較することで共通点や差異を明らかにしたプロジェクトTransport Model Evaluation Project (TMEP)を総括したものである。参加したコードはBoltzmann-Uehling-Uhlenbeck(BUU)法に基づく13のコードと、Quantum Molecular Dynamics (QMD)法に基づく12のコードであった。プロジェクトでは、Au原子核同士を衝突させてその終状態を観測する現実的な計算や、一辺が640nmの箱に核子を詰めて時間発展させる仮想的な計算を行った。その結果、BUU法コードとQMD法コードは計算原理が異なるため、計算の設定に関係なく系統的な差異が生じることが明らかになった。その一方で、同じ方法を採用するコード間の比較では、時間発展を細かく計算することでコード間の差は埋まっていき、一定の収束値を持つことが示された。この結果は今後開発される同分野のコードのベンチマークデータとして有用なものであるだけでなく、原子核基礎物理学の実験や理論研究の標準的な指針としても役に立つことが期待される。
scaling of the vibrational density of states in quasi-2D nanoconfined solidsYu, Y.*; Yang, C.*; Baggioli, M.*; Phillips, A. E.*; Zaccone, A.*; Zhang, L.*; 梶本 亮一; 中村 充孝; Yu, D.*; Hong, L.*
Nature Communications (Internet), 13, p.3649_1 - 3649_10, 2022/06
被引用回数：8 パーセンタイル：81.66(Multidisciplinary Sciences)The vibrational properties of crystalline bulk materials are well described by Debye theory, which successfully predicts the quadratic 
low-frequency scaling of the vibrational density of states. However, the analogous framework for nanoconfined materials with fewer degrees of freedom has been far less well explored. Using inelastic neutron scattering, we characterize the vibrational density of states of amorphous ice confined inside graphene oxide membranes and we observe a crossover from the Debye scaling to an anomalous behaviour upon reducing the confinement size L.
Brumm, S.*; Gabrielli, F.*; Sanchez-Espinoza, V.*; Groudev, P.*; Ou, P.*; Zhang, W.*; Malkhasyan, A.*; Bocanegra, R.*; Herranz, L. E.*; Berda
, M.*; et al.
Proceedings of 10th European Review Meeting on Severe Accident Research (ERMSAR 2022) (Internet), 13 Pages, 2022/05
The current HORIZON-2020 project on "Management and Uncertainties of Severe Accidents (MUSA)" aims at applying Uncertainty Quantification (UQ) in the modeling of Severe Accidents (SA), particularly in predicting the radiological source term of mitigated and unmitigated accident scenarios. Within its application part, the project is devoted to the uncertainty quantification of different severe accident codes when predicting the radiological source term of selected severe accident sequences of different nuclear power plant designs, e.g. PWR, VVER, and BWR. Key steps for this investigation are, (a) the selection of severe accident sequences for each reactor design, (b) the development of a reference input model for the specific design and SA-code, (c) the selection of a list of uncertain model parameters to be investigated, (d) the choice of an UQ-tool e.g. DAKOTA, SUSA, URANIE, etc., (e) the definition of the figures of merit for the UA-analysis, (f) the performance of the simulations with the SA-codes, and, (g) the statistical evaluation of the results using the capabilities, i.e. methods and tools offered by the UQ-tools. This paper describes the project status of the UQ of different SA codes for the selected SA sequences, and the technical challenges and lessons learnt from the preparatory and exploratory investigations performed.
Liu, M.*; Gong, W.; Zheng, R.*; Li, J.*; Zhang, Z.*; Gao, S.*; Ma, C.*; 辻 伸泰*
Acta Materialia, 226, p.117629_1 - 117629_13, 2022/03
被引用回数：45 パーセンタイル：99.49(Materials Science, Multidisciplinary)One hopeful path to realize good comprehensive mechanical properties in metallic materials is to accomplish homogeneous nanocrystalline (NC) or ultrafine grained (UFG) structure with low dislocation density. In this work, high pressure torsion deformation followed by appropriate annealing was performed on 316 stainless steel (SS). For the first time, we successfully obtained NC/UFG 316 SS having uniform microstructures with various average grain sizes ranging from 46 nm to 2.54 m and low dislocation densities. Among the series, an un-precedentedly high yield strength (2.34 GPa) was achieved at the smallest grain size of 46 nm, in which dislocation scarcity induced hardening accounting for 57% of the strength. On the other hand, exceptional strength-ductility synergy with high yield strength (900 MPa) and large uniform elongation (27%) was obtained in the fully recrystallized specimen having the grain size of 0.38 m. The high yield stress and scarcity of dislocation sources in recrystallized UFGs activated stacking faults and deformation twins nucleating from grain boundaries during straining, and their interaction with dislocations allowed for sustainable strain hardening, which also agreed with the plaston concept recently proposed. The multiple deformation modes activated, together with the effective strengthening mechanisms, were responsible for the outstanding comprehensive mechanical performance of the material.
Zhang, X. X.*; Lutz, A.*; Andr
, H.*; Lahres, M.*; Gong, W.; Harjo, S.; Emmelmann, C.*
Journal of Alloys and Compounds, 898, p.162890_1 - 162890_8, 2022/03
被引用回数：6 パーセンタイル：71.08(Chemistry, Physical)The ductility of the Al alloys produced by additive manufacturing (AM) has become a critical property, as the AM Al alloys are increasingly used in the automotive industry. However, the ductility of as-built AM Al alloys is relatively low, even with optimized AM conditions. The post-annealing treatment provides an efficient way to improve ductility. Previous investigation has shown that the annealed AM AlSi3.5Mg2.5 alloy possesses superior ductility. However, the plastic deformation micro-mechanisms of the annealed AM AlSi3.5Mg2.5 alloy remain unclear. In this study, in-situ neutron diffraction was employed to explore the annealed AM AlSi3.5Mg2.5 alloy. The evolutions of phase stresses, dislocation density, and crystallite size in the annealed AM AlSi3.5Mg2.5 alloy during tensile deformation were analyzed. The experimental investigation reveals that the dislocation density in the Al matrix of the annealed AM AlSi3.5Mg2.5 alloy increases slowly in the early plastic deformation stage, and it reaches a saturated level upon the following uniform deformation. The crystallite size decreases quickly in the early deformation stage, and then it decreases slowly. The Kocks-Mecking model and the Voce model can capture the strain hardening behavior well. The determined physical constitutive equations can be applied in continuum mechanical computer simulations.
Arokiaswamy, J. A.*; Batra, C.*; Chang, J. E.*; Garcia, M.*; Herranz, L. E.*; Klimonov, I. A.*; Kriventsev, V.*; Li, S.*; Liegeard, C.*; Mahanes, J.*; et al.
IAEA-TECDOC-2006, 380 Pages, 2022/00
IAEAの共同研究プロジェクト「シビアアクシデント条件下におけるプロトタイプナトリウム冷却高速炉からの放射性物質の放出」は、シビアアクシデント条件下における、リファレンスとなるナトリウム冷却高速炉の施設内における放射性物質および燃料粒子の存在量の、異なる時間スケールにおける現実的な数値シミュレーションを目的として実施された。解析のスコープは3つに分割され、3つのワークパッケージ(WP)として定義された:(1)炉内ソースターム評価、(2)一次系/格納容器系境界のソースターム評価、および(3)格納容器内の現象分析。WP-1の参加機関の結果を比較すると、希ガスおよび放射性セシウムの放出割合、およびカバーガスへの放射性核種の放出割合はよく一致した。共通の圧力履歴を用いたWP-2の解析では、各機関の解析結果はよく一致し、いずれの機関の解析手法も同程度の精度を有することが示された。先行するWPにおける解析と分離するため、放出割合をあらかじめ設定したスタンドアロンケースがWP-3にて定義された。WP-3の全参加機関によるスタンドアロンケースの解析結果は全般的に一致した。
