Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Amamoto, Ippei
Nihon Gakujutsu Shinkokai Gokin Jotaizu Dai-172 Iinkai Kenkyu Hokokusho Vol.14, No.1, p.1 - 11, 2014/05
no abstracts in English
Nagae, Yuji; Enuma, Yasuhiro*; Oshikiri, Masato*; Date, Shingo*; Toyoshi, Akira*; Aizawa, Taiki*; Koyama, Yoichi*; Yanagisawa, Yusuke*
Tainetsu Kinzoku Zairyo Dai-123-Iinkai Kenkyu Hokoku, 52(2), p.161 - 169, 2011/07
no abstracts in English
Nagae, Yuji
Tainetsu Kinzoku Zairyo Dai-123-Iinkai Kenkyu Hokoku, 52(2), p.125 - 134, 2011/07
no abstracts in English
Wakai, Takashi; Onizawa, Takashi; Obara, Satoshi; Nakashima, Takashi*; Yokoyama, Tetsuo*; Iseda, Atsuro*; Ogumo, Shinya*; Futagami, Satoshi*
Tainetsu Kinzoku Zairyo Dai-123-Iinkai Kenkyu Hokoku, 52(2), p.171 - 181, 2011/07
To enhance the economic competitiveness, high-Cr ferritic steels are adopted as the structural materials for JSFR, because the steels have both excellent high temperature strength and thermal properties. Among the high-Cr ferritic steels, modified 9Cr-1Mo steel (compatible to ASTM A213 T91) is a candidate of the structural material for the demonstration facility of JSFR, because the steel has superior microstructure stability at elevated temperature for long time. As for the steam generator tubes, to enhance the safety, straight double-walled tubes will be employed. In this study, the following technical issues were investigated; (1) Industrial manufacturability of thin-walled small bore tubes made of modified 9Cr-1Mo steel, (2) performance demonstration of the thin-walled small bore tubes, (3) industrial manufacturability of double-walled tubes using the thin-walled small bore tubes and (4) extraction of technical problems to manufacture the double-walled tubes for the JSFR steam generator. As a result, thin-walled small bore tubes made of modified 9Cr-1Mo steel were successfully manufactured by using the existing industrial facilities, up to 17m in length. The mechanical properties of the tubes satisfy the requirements from plant designing, as well as those from the material strength standards. Further, double walled tubes were also manufactured, up to 15m in length. The surface conditions of the tubes and the contact pressure between inner and outer tubes should be optimized.
Wakai, Takashi; Nagae, Yuji; Takaya, Shigeru; Obara, Satoshi; Date, Shingo*; Yamamoto, Kenji*; Kikuchi, Koichi*; Sato, Kenichiro*
Tainetsu Kinzoku Zairyo Dai-123-Iinkai Kenkyu Hokoku, 52(2), p.147 - 159, 2011/07
By employing high-Cr ferritic steels to the structural materials for JSFR, a compact plant designing can be achieved. It contributes to reduce the construction cost and to enhance the freedom of designing. Among the high-Cr ferritic steels, modified 9Cr-1Mo steel (compatible to ASTM A335 P91) is a candidate of the structural material for the demonstration facility of JSFR, because the steel has superior microstructure stability at elevated temperature for long time. However, remarkable creep strength degradation has been observed in the welded joint of high-Cr ferritic steels, especially in long-term region. It is known as "Type-IV damage". In the elevated temperature designing for the fast reactors, such creep strength degradation must be taken into account properly. Therefore, the creep strength assessment procedure and the allowable stress for the welded joints made of modified 9Cr-1Mo steel have been proposed. In this study, (1) a series of creep rupture tests to verify the validity of the creep strength assessment procedure was performed. (2) Applicability of the creep strength assessment procedure to the creep fatigue strength assessment of the welded joints made of modified 9Cr-1Mo steel was investigated. (3) Metallurgical examinations of creep ruptured specimens were carried out to confirm the contribution of "Type-IV damage". As a result, it was demonstrated that the creep strength assessment procedure was validated using the long-term creep rupture test results less than 30,000h and that the creep strength assessment procedure was applicable to the creep-fatigue strength assessment based on some uniaxial creep-fatigue test results.
Yoshida, Yu*; Mitsuhara, Masatoshi*; Ikeda, Kenichi*; Nakashima, Hideharu*; Wakai, Takashi
Tainetsu Kinzoku Zairyo Dai-123-Iinkai Kenkyu Hokoku, 47(10), p.109 - 113, 2006/07
This paper studies the influence of V and Nb on the creep strength and behavior of high Cr ferritic steels. A series of creep tests of 11 steels having various V and Nb contents is conducted. The test results are analyzed by omega-method and the microstructures of the damaged specimens are examined by EBSP. As a result, it is shown that omega-method gives good prediction of creep lives of the steels and that the influence of V and Nb on the omega-parameters is significant. In addition, it is clarified that the martensitic microstructure of the steels depends upon Nb content.
Kurata, Yuji; Saito, T.*; Tsuji, Hirokazu; Takatsu, T.*; Shindo, Masami; Nakajima, Hajime
Nihon Gakujutsu Shinkokai Genshiro Zairyo Dai-122-Iinkai Shiryoshu, p.279 - 282, 2000/11
no abstracts in English
Kurata, Yuji; *; ; Shindo, Masami; Nakajima, Hajime; *
Tainetsu Kinzoku Zairyo Dai-123-Iinkai Kenkyu Hokoku, 36(2), p.149 - 156, 1995/07
no abstracts in English
Suzuki, Masahide
Nihon Gakujutsu Shinkokai Genshiro Zairyo Dai-122 Iinkai Shiryo, 0, p.1 - 8, 1995/00
no abstracts in English
Yamahara, Takeshi
Nihon Gakujutsu Shinkokai Genshiro Zairyo Dai-122 Iinkai Shiryo; Heisei-6-Nendo Dai-4-Kai Iinkai Shiryo, 0, 8 Pages, 1994/00
no abstracts in English
*; Nagai, Shiro
Nihon Gakujutsu Shinkokai Maikurobimu Anarishisu Dai-141 Iinkai Dai-73-Kai Kenkyukai Shiryo, No.849, p.7 - 12, 1992/00
no abstracts in English
Watanabe, Katsutoshi; Nakajima, Hajime; Sahira, Kensho*; Marushichi, Koki*; Takeiri, Toshiki*; Saito, Teiichiro*; Takatsu, Tamao*; Nakanishi, Tsuneo*; Koikegami, Hajime*; Higuchi, Makoto*
Tainetsu Kinzoku Zairyo Dai-123-Iinkai Kenkyu Hokoku, 33(2), p.227 - 242, 1992/00
no abstracts in English
Fujita, Mitsutane*; *; Nakajima, Hajime; *; *; Ueno, Fumiyoshi*; Iwata, Shuichi*
Genshiro Zairyo Dai-122 Iinkai Heisei-2-Nendo Dai-5-Kai Iinkai Shiryo (Nihon Gakujutsu Shinkokai), p.7 - 14, 1991/00
no abstracts in English
Genshiro Zairyo Dai-122 Iinkai Showa-63-Nendo Dai-1-Kai Iinkai Shiryo, p.8 - 15, 1988/00
no abstracts in English
Kurata, Yuji; *; Nakajima, Hajime
Tainetsu Kinzoku Zairyo Dai-123-Iinkai Kenkyu Hokoku 29(2), p.109 - 120, 1988/00
no abstracts in English
Kurata, Yuji; *; Nakajima, Hajime
Tainetsu Kinzoku Zairyo Dai-123-Iinkai Kenkyu Hokoku 29(2), p.97 - 107, 1988/00
no abstracts in English
Kiuchi, Kiyoshi; ; Kondo, Tatsuo
Tainetsu Kinzoku Zairyo Dai-123-Iinkai Kenkyu Hokoku 29(2), p.177 - 188, 1988/00
no abstracts in English
Kiuchi, Kiyoshi; B.Harald*; ; Seki, Masahiro; Araki, Masanori
Tainetsu Kinzoku Zairyo Dai-123-Iinkai Kenkyu Hokoku 29(2), p.189 - 197, 1988/00
no abstracts in English
Kiuchi, Kiyoshi; ; Hishinuma, Akimichi
Tainetsu Kinzoku Zairyo Dai-123-Iinkai Kenkyu Hokoku 29(2), p.231 - 239, 1988/00
no abstracts in English
*; *; *; *; *; *
Tainetsu Kinzoku Zairyo Dai-123-Iinkai Kenkyu Hokoku 29(2), p.265 - 273, 1988/00
no abstracts in English