Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Takahashi, Yoshikazu; Suwa, Tomone; Nabara, Yoshihiro; Ozeki, Hidemasa; Hemmi, Tsutomu; Nunoya, Yoshihiko; Isono, Takaaki; Matsui, Kunihiro; Kawano, Katsumi; Oshikiri, Masayuki; et al.
IEEE Transactions on Applied Superconductivity, 25(3), p.4200904_1 - 4200904_4, 2015/06
Times Cited Count：4 Percentile：24.66(Engineering, Electrical & Electronic)The Japan Atomic Energy Agency (JAEA) is responsible for procuring all amounts of Central Solenoid (CS) Conductors for ITER, including CS jacket sections. The conductor is cable-in-conduit conductor (CICC) with a central spiral. A total of 576 Nb
Sn strands and 288 copper strands are cabled around the central spiral. The maximum operating current is 40 kA at magnetic field of 13 T. CS jacket section is circular in square type tube made of JK2LB, which is high manganese stainless steel with boron added. Unit length of jacket sections is 7 m and 6,300 sections will be manufactured and inspected. Outer/inner dimension and weight are 51.3/35.3 mm and around 90 kg, respectively. Eddy Current Test (ECT) and Phased Array Ultrasonic Test (PAUT) were developed for non-destructive examination. The defects on inner and outer surfaces can be detected by ECT. The defects inside jacket section can be detected by PAUT. These technology and the inspected results are reported in this paper.
Sn cable assembled with conduit for ITER central solenoidNabara, Yoshihiro; Suwa, Tomone; Takahashi, Yoshikazu; Hemmi, Tsutomu; Kajitani, Hideki; Ozeki, Hidemasa; Sakurai, Takeru; Iguchi, Masahide; Nunoya, Yoshihiko; Isono, Takaaki; et al.
IEEE Transactions on Applied Superconductivity, 25(3), p.4200305_1 - 4200305_5, 2015/06
Times Cited Count：0 Percentile：0.00(Engineering, Electrical & Electronic)Murakami, Haruyuki; Kizu, Kaname; Ichige, Toshikatsu; Furukawa, Masato; Natsume, Kyohei; Tsuchiya, Katsuhiko; Kamiya, Koji; Koide, Yoshihiko; Yoshida, Kiyoshi; Obana, Tetsuhiro*; et al.
IEEE Transactions on Applied Superconductivity, 25(3), p.4201305_1 - 4201305_5, 2015/06
Times Cited Count：6 Percentile：33.38(Engineering, Electrical & Electronic)JT-60U magnet system will be upgraded to the superconducting coils in the JT-60SA programme of the Broader Approach activities. Terminal joint of Central Solenoid (CS) is wrap type NbSn-NbTi joint used for connecting CS (NbSn) and current feeder (NbTi). The terminal joints are placed at the top and the bottom of the CS systems. CS modules located at middle position of CS system need the lead extension from the modules to the terminal joint. The joint resistance measurement of terminal joint was performed in the test facility of National Institute for Fusion Science. The joint resistance was evaluated by the operating current and the voltage between both ends of the terminal joint part. Test results met the requirement of JT-60SA magnet system. The structural analysis of the lead extension and its support structure was conducted to confirm the support design. In this paper, the results of resistance test of joint and the structural analysis results of lead extension are reported.
Ozeki, Hidemasa; Isono, Takaaki; Kawano, Katsumi; Saito, Toru; Kawasaki, Tsutomu; Nishino, Katsumi; Okuno, Kiyoshi; Kido, Shuichi*; Semba, Tomoyuki*; Suzuki, Yozo*; et al.
IEEE Transactions on Applied Superconductivity, 25(3), p.4200804_1 - 4200804_4, 2015/06
Times Cited Count：0 Percentile：0.00(Engineering, Electrical & Electronic)Nakamura, Kazuya*; Yamamoto, Yusuke*; Suzuki, K.*; Takao, Tomoaki*; Murakami, Haruyuki; Natsume, Kyohei; Yoshida, Kiyoshi
IEEE Transactions on Applied Superconductivity, 25(3), p.4200704_1 - 4200704_4, 2015/06
Times Cited Count：0 Percentile：0.00(Engineering, Electrical & Electronic)Nakamoto, Tatsushi*; Sugano, Michinaka*; Xu, Q.*; Kawamata, Hiroshi*; Enomoto, Shun*; Higashi, Norio*; Idesaki, Akira; Iio, Masami*; Ikemoto, Yukio*; Iwasaki, Ruri*; et al.
IEEE Transactions on Applied Superconductivity, 25(3), p.4000505_1 - 4000505_5, 2015/06
Times Cited Count：0 Percentile：0.00(Engineering, Electrical & Electronic)Recently, development of superconducting magnet system with high radiation resistance has been demanded for application in accelerator facilities such as CERN LHC. In order to realize superconducting magnet system with high radiation resistance, it is necessary to develop electrical insulator with high radiation resistance because the electrical insulator is made of organic materials whose radiation resistance is inferior to that of inorganic materials. We developed a glass fiber reinforced plastic with bismaleimide-triazine resin. The developed material showed excellent radiation resistance; the material evolved gases of 5
10 
mol/g and maintained flexural strength of 640MPa (90% of initial value).
Sueyoshi, Tetsuro*; Kotaki, Tetsuya*; Furuki, Yuichi*; Uraguchi, Yusei*; Kai, Takashi*; Fujiyoshi, Takanori*; Shimada, Yusuke*; Yasuda, Kazuhiro*; Ishikawa, Norito
IEEE Transactions on Applied Superconductivity, 25(3), p.6603004_1 - 6603004_4, 2015/06
Times Cited Count：11 Percentile：49.46(Engineering, Electrical & Electronic)To investigate the effect of discontinuity of 1-D pinning centers on the flux pinning in a wide range of magnetic field directions, discontinuous columnar defects (CDs) and continuous CDs were formed in GdBCO coated conductors using Xe-ion irradiations with 80 and 270 MeV, respectively. An overall shift upward in Jc, for the 80-MeV-irradiated sample compared to the 270-MeV-irradiated one, can be observed in every direction of magnetic field, which is more remarkable as temperature decreases. This implies a synergetic effect of the pinning interaction between the linearity and the discontinuity for the discontinuous CDs.
