Watanabe, Yukinobu*; Sadamatsu, Hiroki*; Araki, Shohei*; Nakano, Keita*; Kawase, Shoichiro*; Kin, Tadahiro*; Iwamoto, Yosuke; Satoh, Daiki; Hagiwara, Masayuki*; Yashima, Hiroshi*; et al.
EPJ Web of Conferences, 239, p.20012_1 - 20012_4, 2020/09
Accelerator-based neutron sources induced by deuteron beams are attractive for study of nuclear transmutation of radioactive waste as well as radiation damage for fusion reactor materials. In the present work, we have carried out a Double Differential cross section (DDX) measurement for Li at 200 MeV in the Research Center for Nuclear Physics (RCNP), Osaka University. A deuteron beam accelerated to 200 MeV was transported to the neutron experimental hall and focused on a thin Li target. Emitted neutrons from the target were detected by two different-size EJ301 liquid organic scintillators located at two distances of 7 m and 20 m, respectively. The neutron DDXs were measured at six angles from 0 to 25). The neutron detection efficiencies of the detectors were calculated by SCINFUL-QMD code. We will present the results of the present DDX measurement and compare them with theoretical model calculations with DEURACS and PHITS.
Nakayama, Shinsuke; Iwamoto, Osamu; Watanabe, Yukinobu*
EPJ Web of Conferences, 239, p.03014_1 - 03014_4, 2020/09
Intensive neutron sources using deuteron accelerators have been proposed for various applications such as irradiation test for fusion reactor materials and production of radioisotopes for medical use. In addition, transmutation system using deuteron-induced spallation reactions has been recently proposed for LLFPs. Accurate and comprehensive deuteron nuclear data are indispensable in the design study of such facilities. Under the above situations, we have been developing a code system dedicated for deuteron-induced reactions, which is called DEURACS. In the present work, calculations using DEURACS are compared with available experimental data up to 200 MeV such as DDXs for emission of neutron or light charged particles. We also analyze isotopic production cross sections of residual nuclei. Validation of the present modelling in DEURACS is discussed through comparison with the experimental data.
Iwamoto, Osamu; Iwamoto, Nobuyuki; Shibata, Keiichi; Ichihara, Akira; Kunieda, Satoshi; Minato, Futoshi; Nakayama, Shinsuke
EPJ Web of Conferences, 239, p.09002_1 - 09002_6, 2020/09
Iwamoto, Nobuyuki; Nakamura, Shoji; Kimura, Atsushi; Katabuchi, Tatsuya*; Rovira, G.*; Hara, Kaoru*; Iwamoto, Osamu
EPJ Web of Conferences, 239, p.17016_1 - 17016_4, 2020/09
Iwamoto, Yosuke; Meigo, Shinichiro
EPJ Web of Conferences, 239, p.20011_1 - 20011_4, 2020/09
PHITS including the NRT model can calculate displacement cross sections of materials for various particle irradiations in wide energy range. Recently, Nordlund et al. provided the athermal recombination corrected (arc) displacement per atom (dpa) function providing more physically realistic descriptions of primary defect creation in materials. Therefore, the arc-dpa will be used for efficient predictions of the usable lifetime of materials in various accelerator facilities. In this work, the arc-dpa function related with the defect production efficiency was implemented in the radiation damage model in PHITS. As a result, for the displacement cross sections of Cu and W under proton irradiations with energies above 100 MeV, the arc-dpa cross sections are smaller than the NRT-dpa cross sections by a factor of about 3. In this presentation, we will present the arc-dpa cross sections for proton, deuteron and heavy-ion irradiations in the energy region between 100 MeV/u and 3 GeV/u.
Hashimoto, Shintaro; Sato, Tatsuhiko
EPJ Web of Conferences, 239, p.03015_1 - 03015_4, 2020/09
Particle transport simulation codes based on the Monte Carlo technique have been successfully applied to shielding calculations in accelerator facilities. Estimation of not only statistical uncertainties, which depend on the number of trials, but also systemic uncertainties, which are caused by uncertainty of total cross section models, is required to confirm the reliability of the simulation results. We evaluated unclear quantities of internal parameters included in the total cross section model by the KALMAN code, which is based on the least squares technique, comparing with experimental data of the total cross section. The uncertainties in the total cross sections obtained by the new model are comparable to the experimental errors. In the present study, the systematic uncertainty included in the simulation results can be estimated by performing the transport calculations with variation of the internal parameters within their unclear quantities.
Dupont, E.*; Bossant, M.*; Capote, R.*; Carlson, A. D.*; Danon, Y.*; Fleming, M.*; Ge, Z.*; Harada, Hideo; Iwamoto, Osamu; Iwamoto, Nobuyuki; et al.
EPJ Web of Conferences, 239, p.15005_1 - 15005_4, 2020/09
Katabuchi, Tatsuya*; Iwamoto, Osamu; Hori, Junichi*; Kimura, Atsushi; Iwamoto, Nobuyuki; Nakamura, Shoji; Shibahara, Yuji*; Terada, Kazushi*; Rovira, G.*; Matsuura, Shota*
EPJ Web of Conferences, 239, p.01044_1 - 01044_4, 2020/09
Fleming, M.*; Chadwick, M.*; Brown, D.*; Capote, R.*; Ge, Z.*; Herman, M.*; Ignatyuk, A.*; Ivanova, T.*; Iwamoto, Osamu; Koning, A.*; et al.
EPJ Web of Conferences, 239, p.15003_1 - 15003_5, 2020/09
Fleming, M.*; Bernard, D.*; Brown, D.*; Chadwick, M. B.*; De Saint Jean, C.*; Dupont, E.*; Ge, Z.*; Harada, Hideo; Hawari, A.*; Herman, M.*; et al.
EPJ Web of Conferences, 239, p.15002_1 - 15002_4, 2020/09
Rodriguez, D.; Abbas, K.*; Crochemore, J.-M.*; Koizumi, Mitsuo; Nonneman, S.*; Pedersen, B.*; Rossi, F.; Seya, Michio*; Takahashi, Tone
EPJ Web of Conferences, 239, p.17005_1 - 17005_5, 2020/09
Iwamoto, Hiroki; Meigo, Shinichiro; Matsuda, Hiroki
EPJ Web of Conferences, 239, p.06001_1 - 06001_6, 2020/09
no abstracts in English
Matsuda, Hiroki; Meigo, Shinichiro; Iwamoto, Hiroki; Maekawa, Fujio
EPJ Web of Conferences, 239, p.06004_1 - 06004_4, 2020/09
For the Accelerator-Driven nuclear transmutation System (ADS), nuclide production yield estimation in the lead-bismuth target is important to manage the target. However, experimental data of nuclide production yield by spallation and high-energy fission reactions are scarce. In order to obtain the experimental data, we experimented in J-PARC using Pb and Bi samples. The samples were irradiated with protons at various kinematic energy points between 0.4 and 3.0 GeV. After the irradiation, the nuclide production cross section over Be to Re was obtained by spectroscopic measurement of decay gamma-rays from the samples with HPGe detectors. The present experimental results were compared with the evaluated data (JENDL-HE/2007) and the calculation with the PHITS code and the INCL++ code. The present experiment data showed consistency with other experimental data with better accuracy than other ones. In reactions to produce light nuclides, JENDL and calculation with the PHITS and INCL++ for Be production agreed with the data.Na production, however, underestimated about 1/10 times. For middle to heavy nuclide productions cases, both calculations agreed with the experiment by a factor of two. JENDL showed lower energy having a maximum value of excitation function maximal value than the experimental data.
Meigo, Shinichiro; Matsuda, Hiroki; Iwamoto, Yosuke; Yoshida, Makoto*; Hasegawa, Shoichi; Maekawa, Fujio; Iwamoto, Hiroki; Nakamoto, Tatsushi*; Ishida, Taku*; Makimura, Shunsuke*
EPJ Web of Conferences, 239, p.06006_1 - 06006_4, 2020/09
R&D of the beam window is crucial in the ADS, which serves as a partition between the accelerator and the target region. Although the displacement per atom (DPA) is used to evaluate the damage on the window, experimental data on the displacement cross section is scarce in the energy region above 20 MeV. We started to measure the displacement cross section for the protons in the energy region between 0.4 to 3 GeV. The displacement cross section can be derived by resistivity change divided by the proton flux and the resistivity change per Frankel pair on cryo-cooled sample to maintain damage. Experiments were conducted at the 3 GeV proton synchrotron at the J-PARC Center, and copper was used as samples. As a result of comparison between the present experiment and the calculation of the NRT model, which is widely used for calculation of the displacement cross section, it was found that the calculation of the NRT model overestimated the experiment by about 3 times.
Dimitriou, P.*; Basunia, S*; Bernstein, L.*; Chen, J.*; Elekes, Z.*; Huang, X.*; Hurst, A.*; Iimura, Hideki; Jain, A. K.*; Kelley, J.*; et al.
EPJ Web of Conferences, 239, p.15004_1 - 15004_4, 2020/09
The Evaluated Nuclear Structure Data File (ENSDF) includes the most extensive and comprehensive set of nuclear structure and decay data evaluations performed by the international network of Nuclear Structure and Decay Data evaluators (NSDD) under the auspices of the IAEA. In this report we describe some of the recent NSDD activities and provide future perspectives.
Chiaveri, E.*; Aberle, O.*; Alcayne, V.*; Kimura, Atsushi; 124 of others*
EPJ Web of Conferences, 239, p.17001_1 - 17001_8, 2020/09
Terranova, N.*; Aberle, O.*; Alcayne, V.*; Kimura, Atsushi; 125 of others*
EPJ Web of Conferences, 239, p.01024_1 - 01024_5, 2020/09
Manna, A.*; Aberle, O.*; Alcayne, V.*; Kimura, Atsushi; 125 of others*
EPJ Web of Conferences, 239, p.01008_1 - 01008_5, 2020/09
no journal, ,
As a keynote talk requested by the conference organizer, the past and current status of evaluated nuclear data files, which is the final product of nuclear data research, is reviewed. perspective of the nuclear data files is also discussed as well as future research direction.