Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Ikeda, Atsushi
Bunseki Kagaku, 73(4.5), p.147 - 159, 2024/04
Factor analysis (FA), one of the multivariate analysis methods that are frequently employed in chemometrics, is a powerful tool to extract physical/chemical information of pure components from the analytical data of the mixture of the components. Although FA has been applied mainly to the quantitative analysis in the field of analytical chemistry, its application to the qualitative analysis has been limited. This article aims at introducing FA to the qualitative analysis for determining the speciation/structure of individual chemical species/compounds by X-ray absorption spectroscopy (XAS). The fundamental concept to extract physically/chemically meaningful information from XAS-FA is described, and some reported studies using XAS-FA for the qualitative determination of chemical species/compounds are summarized.
Morii, Shiori; Yomogida, Takumi; Asai, Shiho*; Ouchi, Kazuki; Oka, Toshitaka; Kitatsuji, Yoshihiro
Bunseki Kagaku, 72(10.11), p.441 - 448, 2023/10
Rapid analytical method for the determination of Zr-93 in radioactive wastes has been developed. Laser ablation (LA)-ICP-MS was applied to the analysis of Zr isotopes in simulated high-level radioactive waste (HLW). Sample preparation time was dramatically reduced by using a DGA resin as the adsorbent for Zr. Direct quantification of Zr isotopes in this resin sample was carried out by LA-ICP-MS. Laser settings were optimized to obtain a reliable isotope ratio of the sample by LA-ICP-MS. Quantification of Zr isotopes in the simulated HLW solution by isotope dilution mass spectrometry (IDMS) was examined. The amount of Zr-90 in the sample obtained by IDMS corresponded to a value calculated from the given concentration of Zr in the sample within uncertainty. Thus, this method can be applied for the quantification of Zr-93 in radioactive wastes.
Osawa, Takahito
Hoshaka Bunseki, (34), p.34 - 50, 2023/04
This paper describes the nomenclature, principles, advantages and disadvantages of prompt gamma-ray analysis, the configuration of the PGA installed in JRR-3, what kind of analysis can be performed with the PGA, and how to use the PGA, respectively.
Cs concentration and Cs/
Cs isotopic ratio measurementShimada, Asako
Bunseki Kagaku, 71(12), p.625 - 633, 2022/12
Cesium-135 is one of the important nuclides to assess the safe disposal of High Level Waste (HLW). Therefore, the calculation code and library to evaluate the Cs concentration in HLW have been improved through comparisons with experimental results. On the other hand, even basic data of Cs, such as its half-life, have large uncertainty. Because the Cs/Cs isotopic ratio suggests its origin and introduction date, the ratios in environmental samples are measured to study global fallout from nuclear weapons testing and nuclear accidents. Such measurement methods was attracted attention, in particular, after the accident at the Fukushima Daiichi Nuclear Power Station. Measurement of the Cs/Cs isotopic ratio in environmental samples was challenging because the radiocesium has a very low concentration and it co-exists with huge amounts of Ba isotopes, which are isobaric interfering nuclides, are co-exist. Chemical separation methods were developed to eliminate interfering nuclides and improve the performance of the mass spectrometer to enable the measurement of the ratios. In this review, the features of the Cs/Cs isotopic ratio for each origin and recent developments in measurement techniques are summarized.
Haraga, Tomoko; Saito, Shingo*
Bunseki Kagaku, 70(12), p.671 - 679, 2021/12
We developed highly sensitive capillary electrophoresis-laser-induced fluorescence detection methods for lanthanide (Ln) and actinide (An) ions with small sample volume and low emission of waste, by which the radiation risk can be minimized. Specifically, determination of Nd ion in spent nuclear fuel, effective separation between Am and Cm ion, and specific detection of UO
in real radioactive samples were achieved by molecular design of fluorescence probes composed of an aminocarboxylate chelating moiety, a fluorophore and a spacer, and unique separation mode based on dynamic ternary complexation. We found that there are appropriate combination of probe and ternary complexation for detection and separation of each Ln and An ions. For example, acyclic and macrocyclic hexadentate is suitable for Ln
, Am and Cm, and planer tetradentate with 
electron system is specific for UO, with ppt-sub ppt level detection.
Takeda, Masayasu
Bunseki, 2021(11), p.611 - 615, 2021/11
no abstracts in English
Matsueda, Makoto; Takagai, Yoshitaka*
Bunseki, 2021(4), p.160 - 161, 2021/04
no abstracts in English
Mochizuki, Akihito
Bunseki, 2021(1), p.2 - 7, 2021/01
no abstracts in English
Shimada, Asako
Nihon Bunseki Kagakukai Kanto Shibu Nyusu, (31), p.7 - 8, 2021/00
I am very glad to win a prize, new century award of Kanto branch of The Japan Society for Analytical Chemistry. I deeply appreciate recommender and co-workers. The title of award was "Development of analytical method of difficult to measure nuclides in radioactive wastes", and especially development of analytical method for Am-242m, Mo-93, and I-129 was recognized. By measuring beta-ray of Am-242, which is progeny nuclide of Am-242m and having high intensity and shorter half-life, measuring time was shortened to approximately 1/20 compare to traditional method. Analyzed Mo-93 example was extremely few. When Mo-93 was analyzed via X-ray, Zr-93 and Nb-93m were the interfering nuclides, therefore, separation method of Mo from Zr and Nb was developed and the method was applied to the rubble sample collected at the Fukushima Daiichi Nuclear Power Station (FDNPS). Official method to measure I-129 in environmental samples were optimized to measure I-129 in the contaminated water collected at FDNPS.
Sr analysisHorita, Takuma; Asai, Shiho*; Konda, Miki; Matsueda, Makoto; Hanzawa, Yukiko; Kitatsuji, Yoshihiro
Bunseki Kagaku, 69(10/11), p.619 - 626, 2020/10
Times Cited Count：0 Percentile：0(Chemistry, Analytical)We have developed a Sr adsorption fiber for rapid analysis of Sr. The prepared Sr adsorption fiber has a Sr-extraction layer that densely retains a Sr-selective extractant, an 18-crown-6 ether derivative, on the fiber surface. Hydrophobic group-containing polymer chains embedded onto the surface of the fiber allow to form a hydrophobic phase, incorporating Sr-selective extractants. This unique surface structure provides high adsorption capacity, leading to rapid and highly efficient adsorption of Sr. The adsorption capacity of the Sr adsorption fiber was 3 times higher than commercially available 18-crown-6 ether derivative-impregnated resin (Sr Resin). The equilibrium adsorption capacity of the Sr adsorption fiber was comparable to the Sr Resin. The retained Sr was finally determined by a GM counter. The total analysis time including the Sr adsorption and measurement was about 1 hour.
Komeda, Masao
Bunseki, 2019(10), p.459 - 461, 2019/10
no abstracts in English
Tomita, Jumpei
Bunseki, 2019(3), p.112 - 113, 2019/03
no abstracts in English
Taguchi, Shigeo; Miyauchi, Hironari*; Horigome, Kazushi; Yamamoto, Masahiko; Kuno, Takehiko
Bunseki Kagaku, 67(11), p.681 - 686, 2018/11
In thermal ionization mass spectrometry, de-gassing is one of the important treatments to release impurities of filaments and to minimize the influence of background. In this work, the effect of the surface change in the tungsten filament induced by the conductively heating treatment on uranium isotopic (
U/
U) measurement has been investigated. It was found that the conductively heating treatment of the filament has the effect of smoothing the surface of the filament and also has the effect of improving the deposition of the sample on the filament surface. As a result of either these effects, the precision of uranium isotopic (U/U) measurement was improved.
Esaka, Fumitaka
Bunseki, 2018(10), p.408 - 411, 2018/10
Recent development of analytical techniques for identification of particles containing nuclear materials, isotope ratio analysis of uranium and plutonium using mass spectrometry, and age determination is described in this paper. These techniques are successfully applied to the trace analysis for nuclear non-proliferation.
Mochizuki, Akihito
Bunseki, 2018(10), P. 461, 2018/10
no abstracts in English
Saeki, Morihisa*; Asai, Shiho; Oba, Hironori*
Bunseki, 2018(4), p.138 - 143, 2018/04
Platinum group metal (PGM) has attracted much attention in light of increasing demands in the industrial sector. A wide variety of techniques specialized for PGM separation, such as, solvent extraction, solid phase extraction, and molten salt electrolysis have been developed so far. Among such techniques, a newly developed separation technique based on laser-induced particulate formation can be a promising alternative to conventional ones. It enables non-contact and highly-selective separation with a simple operation. In this review, the research history and the basic mechanism of laser-induced particulate formation were outlined. Several applications were also mentioned, focusing on our latest research progress which achieved a world first quantitation of radioactive palladium in a spent nuclear fuel sample.
Saito, Kyoichi*; Asai, Shiho
Bunseki Kagaku, 66(11), p.771 - 782, 2017/11
Times Cited Count：1 Percentile：3.38(Chemistry, Analytical)Recovery and purification of rare metals, which are essential ingredients for highly functional materials, generally comes with operational difficulty. In this study, we have developed polymer adsorbents specially designed for highly-efficient adsorption of rare metal ions and exhibited their practical adsorption performances. Radiation-induced graft polymerization, one of the effective modification techniques for polymers, was employed for preparing the proposed adsorbents. Among such adsorbents, a 6-nylon fiber with nucleic-acid base, adenine, on the surface of the fiber demonstrated specific adsorption of ruthenium and palladium ions. In addition, a 6-nylon fiber with an extractant HDEHP (bis (2-ethylhexyl) phophoric acid) that has high affinity for lanthanides, achieved higher separation speed than a commercially available HDEHP-impregnated resin.
Naganawa, Hirochika
Bunseki Kagaku, 66(11), p.797 - 808, 2017/11
Times Cited Count：6 Percentile：22.41(Chemistry, Analytical)A new liquid-liquid extraction method, called the emulsion-flow method, has recently been developed at Japan Atomic Energy Agency (JAEA). The emulsion-flow method, where low cost, simplicity, high efficiency, compactness, safety, and eco-friendly go together, has attracted attention, and has been expected to bring innovation to liquid-liquid extraction technologies. Compared with conventional industrial apparatuses, an emulsion-flow apparatus successfully combines the lowest cost superior to a spray column and the highest performance (the highest efficiency and the highest processing speed) comparable to a centrifugal extractor. Furthermore, the emulsion-flow method can also be used for collecting particulate components by utilizing their aggregation onto a liquid-liquid interface and for purifying water polluted by oil with its remarkable phase-separating ability.
Pd by ICP-MS; The Relation between separation conditions and Pd recoveryYomogida, Takumi; Asai, Shiho; Saeki, Morihisa*; Hanzawa, Yukiko; Horita, Takuma; Esaka, Fumitaka; Oba, Hironori*; Kitatsuji, Yoshihiro
Bunseki Kagaku, 66(9), p.647 - 652, 2017/09
Times Cited Count：2 Percentile：6.78(Chemistry, Analytical)Palladium-107 is a long-lived fission product, which can be found in high-level radioactive liquid wastes (HLLW). Determination of the Pd contents in HLLW is essential to evaluate the long-term safety of HLLW repositories. However, the Pd content in HLLW has not been reported because of difficulties in pretreatment for the measurement. In this study, we investigated applicability of laser-induced photoreduction to HLLW solution: it enables a simple and non-contact separation of Pd. The results showed the recovery of 60% was achieved at the conditions: 40% ethanol, 20 min irradiation, 100 mJ of pulse energy. Additionally, major radionuclides and potentially interfering components in ICP-MS were removed from the simulated HLLW over a wide concentration range of Pd from 0.24 to 24 mg L
, showing the applicability of the proposed separation technique to HLLW samples.
Okamura, Hiroyuki
Bunseki Kagaku, 66(7), p.531 - 532, 2017/07
This paper summarizes the author's doctoral thesis on analytical chemistry. In this study, the ionic liquid (IL) extraction of various metal(II, III) complexes with macrocyclic and anionic chelating ligands has been investigated to clarify the solvent effect of ILs and to demonstrate the specificity and superiority of the IL extraction systems over conventional ones. The evaluation of the extraction equilibrium of Eu(III) with 2-thenoyltrifluoroacetone (Htta) in 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C
mim][TfN]) and time-resolved laser-induced fluorescence spectroscopy revealed the specific solute-solvent interactions between Eu(tta)
and [Cmim][TfN]. The IL synergistic extraction with Htta and 
-dicyclohexano-18-crown-6 was developed. The extractability of lighter lanthanides(III) was remarkably enhanced by a synergistic effect of crown ethers. A macrocyclic ligand (H
DA18C6) composed of diaza-18-crown-6 and two 4-acyl-5-pyrazolones was synthesized for the extraction of Sr(II). The extraction performance of HDA18C6 was significantly enhanced only in [Cmim][TfN] by the intramolecular cooperative effect.
