Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Shinto, Katsuhiro; Ichikawa, Masahiro; Takahashi, Hiroki; Kondo, Keitaro; Kasugai, Atsushi; Gobin, R.*; Sen
e, F.*; Chauvin, N.*; Ayala, J.-M.*; Marqueta, A.*; et al.
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.493 - 495, 2015/09
Development of the prototype accelerator (LIPAc) for the engineering validation of the International Fusion Materials Irradiation Facility (IFMIF) which is an accelerator driven neutron source has been progressed at Rokkasho. The LIPAc is a deuteron linear accelerator consisting of an injector, a radio-frequency quadrupole (RFQ) linac and a superconducting linac. The objective of LIPAc is to produce a CW beam with the energy and current of 9 MeV and 125 mA, respectively. The injector was developed at CEA/Saclay and succeeded to produce CW proton and deuteron beams of 100 keV/140 mA by autumn 2012. After the test at CEA/Saclay, the injector was shipped to the International Fusion Energy Research Centre (IFERC) in Rokkasho, Aomori and started to reassemble from the end of 2013. It was successfully produced proton beams in November 2014 at Rokkasho. While the ion source conditioning was done, the beam test was progressed. In this paper, the present status of the LIPAc injector at Rokkasho with some experimental results will be presented.
Nishimori, Nobuyuki; Nagai, Ryoji; Mori, Michiaki; Hajima, Ryoichi; Yamamoto, Masahiro*; Honda, Yosuke*; Miyajima, Tsukasa*; Uchiyama, Takashi*; Jin, X.*; Obina, Takashi*; et al.
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.511 - 515, 2015/09
no abstracts in English
Tamura, Fumihiko; Shimada, Taihei; Yoshii, Masahito*; Omori, Chihiro*; Yamamoto, Masanobu; Nomura, Masahiro; Toda, Makoto*; Hasegawa, Katsushi*; Hara, Keigo*
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.639 - 642, 2015/09
In the J-PARC RCS, magnetic alloy (MA) loaded rf cavities are employed to achieve a high accelerating voltage and to realize the dual harmonic operation, where a single cavity is driven by the fundamental accelerating rf and the second harmonic. The cavity is driven by a class-AB push-pull tetrode amplifier. R&D for a high power balun to mitigate the unbalanced output voltages of two tubes is undergoing. The balun is a rf transformer, which consists of a MA core and high voltage cables. In application to the RCS rf system, the maximum rf voltage is very high in the order of 15kV and suppression of corona dischages is a key. We presentthe techniques to suppress corona discharges. Also, the R&D status of cooling of the MA core and cables.
Yuri, Yosuke; Yuyama, Takahiro; Ishizaka, Tomohisa; Koka, Masashi; Yamada, Naoto
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.420 - 423, 2015/09
no abstracts in English
Sawabe, Yuki; Maruta, Tomofumi*; Liu, Y.*; Miura, Akihiko; Miyao, Tomoaki*; Ishiyama, Tatsuya; Kikuzawa, Nobuhiro; Hayashi, Naoki
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1202 - 1205, 2015/09
no abstracts in English
Miyawaki, Nobumasa; Fukuda, Mitsuhiro*; Kurashima, Satoshi; Kashiwagi, Hirotsugu; Okumura, Susumu
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.706 - 708, 2015/09
no abstracts in English
Takahashi, Hiroki; Narita, Takahiro; Usami, Hiroki; Sakaki, Hironao; Kojima, Toshiyuki*
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.756 - 759, 2015/09
no abstracts in English
Ikeda, Hiroshi; Kikuzawa, Nobuhiro; Yoshii, Akinobu*; Kato, Yuko
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1312 - 1316, 2015/09
The Linac and the RCS in J-PARC provide enormous operation data and we have been stored them into PostgreSQL. We are planning to replace it with HBase, a data store specialized for big-data and is on a distributed file system provided by Hadoop, using a cluster with advantages including automatically recovering and easily extending the capacity. In the previous presentation we reported we updated HBase/Hadoop in our test system and we showed issues to fix our tools in the new system, while we also mentioned issues about the construction of our cluster itself. In this presentation we are reporting we have re-designed and re-constructed the cluster with resolving the issues, including enhancing hardware of master nodes, creating automatic scripts to construct nodes, and introducing monitoring tools for nodes. Having accordingly adjusted the configurations of HBase/Hadoop and measured the performance of our new system, we are also reporting its results and considerations.
Kashiwagi, Hirotsugu; Miyawaki, Nobumasa; Kurashima, Satoshi; Okumura, Susumu
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.703 - 705, 2015/09
no abstracts in English
-ray beamsHajima, Ryoichi; Sawamura, Masaru; Nagai, Ryoji; Nishimori, Nobuyuki; Hayakawa, Takehito; Shizuma, Toshiyuki; Angell, C.
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.79 - 83, 2015/09
Generation of energy-tunable narrow-bandwidth -rays via Laser Compton Scattering (LCS) is of great interest for scientific studies and applications of MeV photons which interact with nuclei. We are developing technologies relevant to generation of high-brightness LCS -ray beams. One of the promising applications of such -rays is the nondestructive detection and assay of nuclides which are necessary for nuclear security and safeguards. We summarize R-and-D status of LCS -ray sources and overview future applications.
Maebara, Sunao; Sukegawa, Keiichi*; Tadano, Shuya*; Kasugai, Atsushi; Suzuki, Hiromitsu; Abe, Kazuhiko*; Oku, Ryuji*; Sugimoto, Masayoshi
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1140 - 1142, 2015/09
For the IFMIF/EVEDA accelerator prototype RFQ linac, the operation frequency of 175MHz was selected to accelerate a large current of 125mA. The driving RF power of 1.28MW by 8 RF input couplers has to be injected to the RFQ cavity for CW operation mode. For each RF input coupler, nominal RF power of 160kW and maximum transmitted RF power of 200kW are required. For this purpose, an RF input coupler with cooling functions was designed, based on a 6 1/8 inch co-axial waveguide, and the RF coupler was manufactured by way of trial. For the trial RF coupler, high-power tests using a high voltage standing wave on a high-Q load circuit wave were carried out, and a 200kW-14 sec CW operation were performed after four days of RF aging. No RF contact defects, unnecessary low-Q value and extraordinary outgassing were observed. This report describes the high-power tests of the RF input coupler.
Hori, Toshihiko; Shinozaki, Shinichi; Sato, Fumiaki; Fukui, Yuji*; Futatsukawa, Kenta*
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.643 - 646, 2015/09
We are making efforts to decrease the fault rate of the high voltage power supplies for 324 MHz klystron. A new Veto module has been developed to prevent the 25 Hz trigger fan out module from malfunction due to the klystron discharge. As the result of installing the Veto module to the SDTL#16 klystron station, the klystron had never stopped for two months operation although the discharge occurred forty-two times during the operation. It confirmed that the installation of the Veto module is extremely useful to operate the klystron stably.
Usami, Hiroki; Takahashi, Hiroki; Komukai, Satoshi*
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.760 - 763, 2015/09
EU and JAEA are advancing development of Linear IFMIF Prototype Accelerator (LIPAc) control system jointly, but JAEA keeps developing central control system (CCS) mainly. Data transfer during an equipment control system of CCS and EU is performed through EPICS. JAEA is using PostgreSQL as 1 of development elements in CCS and is advancing development of the system to record the whole EPICS data of LIPAc (the data acquisition system). On the other hand, a data acquisition is performed using BEAUTY (Best Ever Archive Toolset, yet) in an element test of equipment at Europe. Therefore "1 client refers to collected data by more than one server machine" with "compatibility securement of data with BEAUTY" in case of development of the data acquisition system of CCS, and, it's necessary to consider "To do a data acquisition and backup work at the same time". For the moment, former 2 are in progress. And a demonstration of the data acquisition system is being performed simultaneously with commissioning in injector. The data acquisition system is collecting data of injector other ones, and the data reference by a monitor with CSS (Control System Studio) is also possible. We will report on the current state of the development of the data acquisition system by making reference to a result of the test by injector commissioning.
Kato, Shinichi; Takayanagi, Tomohiro; Harada, Hiroyuki; Horino, Koki; Tobita, Norimitsu; Ueno, Tomoaki*; Kinsho, Michikazu
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1180 - 1184, 2015/09
For the high intensity proton accelerator, the mitigation of the space charge force is most important because it causes the beam loss. For mitigation, the painting injection method which arranges the injection beam on the wide phase-space area during the multi-turn injection has been performed to expand the circulating beam in the J-PARC RCS. In the horizontal plane, the position and angle of the injection beam are fixed and these of the circulating beam are changed during the painting injection. Specifically, the time variation of the bump orbit height at the injection point is generated by the 4 paint bump magnet whose power supply are separate. Hence, the accuracy of the painting injection depend on the power conditioning precision of the magnet power supply. Therefore, the output characteristics of the power supply was examined for the precise power conditioning. In addition, the automatic conditioning tool has been developed based on that results.
Shinoe, Kenji*; Sakai, Hiroshi*; Umemori, Kensei*; Enami, Kazuhiro*; Sawamura, Masaru; Egi, Masato*; Furuya, Takaaki*
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.548 - 552, 2015/09
no abstracts in English
Nagai, Ryoji; Hajima, Ryoichi; Shizuma, Toshiyuki; Mori, Michiaki; Akagi, Tomoya*; Kosuge, Atsushi*; Honda, Yosuke*; Araki, Sakae*; Terunuma, Nobuhiro*; Urakawa, Junji*
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1328 - 1330, 2015/09
Accelerator and laser technologies required for laser Compton scattering (LCS) photon source based on an energy-recovery linac (ERL) have been developed at the Compact ERL (cERL) facility. A high-flux, energy tunable, and monochromatic photon source such as the ERL-based LCS photon source is necessary for nondestructive assay of nuclear materials. For the demonstration of the ERL-based LCS photon generation, a laser enhancement cavity was installed at the recirculation loop of the cERL. The electron beam energy, the laser wavelength, and the collision angle are 20 MeV, 1064 nm, and 18 
, respectively. The calculated maximum energy of the LCS photons is about 7 keV. A silicon drift detector (SDD) with active area of 17 mm
placed 16.6 m from the collision point was used for observation of the LCS photons. As a result of the measurement, the flux on the detector, central energy, and energy width of the LCS photons were obtained as 1200/s, 6.91 keV, and 81 eV, respectively.
Yamamoto, Kazami; Kinsho, Michikazu
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.377 - 381, 2015/09
The J-PARC 3-GeV Rapid Cycling Synchrotron (RCS) aims to deliver 1 MW proton beam to the materials and life science experimental facility (MLF) and the main ring synchrotron. While the energy and the peak current of J-PARC linac had been increased in 2013 and 2014, preparations of RCS for 1 MW operation were also arranged. As a result of the injection energy upgrade in 2013, we confirmed that the space charge effect during acceleration process was well eased and the beam loss was drastically reduced. After increment of the peak current from the linac, we tried 1 MW-equivalent operation. This first trial revealed that the power supply of the RF cavity was insufficient to accelerate 1 MW-equivalent beam. The RF system was improved at the end of 2014, and 1 MW-equivalent beam operation was achieved in January, 2015. The beam power for MLF users was also increased to 500 kW in April. In this paper, we report the improvement and status of RCS for high power operation.
Sawamura, Masaru; Hajima, Ryoichi; Nishimori, Nobuyuki; Nagai, Ryoji; Iwashita, Yoshihisa*; Tongu, Hiromu*; Kubo, Takayuki*; Saeki, Takayuki*
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.583 - 586, 2015/09
no abstracts in English
Matsuda, Makoto; Osa, Akihiko; Abe, Shinichi; Ishizaki, Nobuhiro; Tayama, Hidekazu; Nakanoya, Takamitsu; Kabumoto, Hiroshi; Nakamura, Masahiko; Kutsukake, Kenichi; Otokawa, Yoshinori; et al.
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.357 - 360, 2015/09
no abstracts in English
Nishimori, Nobuyuki; Nagai, Ryoji; Sawamura, Masaru; Hajima, Ryoichi
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.508 - 510, 2015/09
no abstracts in English
