Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Sawamura, Masaru; Hajima, Ryoichi; Kikuzawa, Nobuhiro; Minehara, Eisuke; Nagai, Ryoji; Nishimori, Nobuyuki
Proceedings of 2003 Particle Accelerator Conference (PAC 2003) (CD-ROM), p.3446 - 3448, 2003/00
no abstracts in English
Maebara, Sunao; Morishita, Takatoshi; Sugimoto, Masayoshi; Imai, Tsuyoshi; Takeuchi, Hiroshi; Sazawa, Shingo*; Saigusa, Mikio*
Proceedings of 2003 Particle Accelerator Conference (PAC 2003) (CD-ROM), p.2829 - 2831, 2003/00
It is indispensable to obtain the technical know-how of the IFMIF RFQ design in the development of RFQ system. It is very important to determine the mesh size in analysis code of the RFQ design. The design of 175MHz RFQ mock-up modules has been done by MAFIA code. Based on this design, the 175MHz RFQ mock-up which consists of two end-plate modules and RFQ modules are fabricated for low power tests. The resonant frequencies have been measured in RFQ length of 1.1m and 2.1m.The measured frequencies are in a good agreement with the calculated values within 1MHz when the mesh size is 1/350 of the longitudinal length.
Sawamura, Masaru; Hajima, Ryoichi; Kikuzawa, Nobuhiro; Minehara, Eisuke; Nagai, Ryoji; Nishimori, Nobuyuki
Proceedings of 2003 Particle Accelerator Conference (PAC 2003) (CD-ROM), p.3449 - 3451, 2003/00
no abstracts in English
Nagai, Ryoji; Hajima, Ryoichi; Kikuzawa, Nobuhiro; Minehara, Eisuke; Nishimori, Nobuyuki; Sawamura, Masaru
Proceedings of 2003 Particle Accelerator Conference (PAC 2003) (CD-ROM), p.3443 - 3445, 2003/00
no abstracts in English
Yamazaki, Yoshishige
Proceedings of 2003 Particle Accelerator Conference (PAC 2003) (CD-ROM), p.576 - 580, 2003/00
The JAERI-KEK Joint Project for the High Intensity Proton Accelerator, now referred to as the J-PARC Project (Japan Proton Accelerator Research Complex), comprises a 400-MeV linac, a 3-GeV, 25-Hz Rapid-Cycling Synchrotron (RCS), and a 50-GeV Main Synchrotron (MR). In contrast to the SNS or the ESS, the J-PARC makes use of the RCS in order to produce MW-class pulsed spallation neutrons rather than a combination of the full-energy linac and the compressor ring.
Ao, Hiroyuki; Hayashizaki, Noriyosu*; Paramonov, V.*
Proceedings of 2003 Particle Accelerator Conference (PAC 2003) (CD-ROM), p.2826 - 2828, 2003/00
An Annular Coupled Structure (ACS) has been developed for upgrade of a J-PARC (Japan Proton Accelerator Research Complex) linac from 180 MeV to 400 MeV. Although install area is prepared for the ACS cavities at an initial construction, it will be used as a beam-transport line temporarily. Aluminum and copper models were fabricated for RF properties confirmation based on an initial design, and for final optimization. RF measurement procedure of the ACS structure was also studied thorough the R&D process. Many items should be considered for mass production; schedule, handling parts, utilities, and so on. The measurement results of models and some fabrication status are presented.