Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kurata, Yuji; Kikuchi, Kenji; Saito, Shigeru; Futakawa, Masatoshi; Sasa, Toshinobu
FZKA-6876, p.190 - 198, 2003/12
A report at MEGAPIE(Megawatt Pilot Experiment) Technical R & D Meeting is collected into an FZK report. According to the static corrosion tests, Al surface-treated layer produced by the gas diffusion method exhabited corrosion resistance to liquid Pb-Bi, while Al surface-treated layer produced by the melt dipping method suffered a severe corrosion attack. Furtheremore, it was found that a thick ferrite layer was formed in the surface of austenitic stainless steel at 550
C. Dissolution at high temperature parts, precipitation of Fe-Cr alloy and deposition of PbO at low temperature parts occured in the first loop corrosion test. These caused plugging of the narrow passage in electro-magnetic pumu(EMP) system. Adoption of filters and a wide passage in an EMP system, and the use of an inner-polished tube specimen brought about a good effect.
Futakawa, Masatoshi; Kurata, Yuji; Henry, J.*; Ioka, Ikuo; Saito, Shigeru; Naito, Akira
FZKA-6876, p.166 - 171, 2003/12
A report at MEGAPIE(Megawatt Pilot Experiment) Technical R & D Meeting is collected into an FZK report. Triple ion beam irradiation tests on T91 specimens were conducted under MEGAPIE condition using TIARA facility at JAERI. Results of triple ion beam irradiation up to 15dpa, 1400appm He, 10000appm H at 320C were compared with those of single or dual beam irradiation of Fe or He ions by use of a micro-indentation method. Hardsness increase was mainly attributed to displacement damage by Fe ions. A little effect on hardness was found on simultaneous implantation of He and H ions. An analysis method to predict mechanical characterization form micro-indentation test results was developed on ion irradiated materials.