検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 5 件中 1件目~5件目を表示
  • 1

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

発表言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Status of the laser manipulations of H$$^{-}$$ beam at J-PARC

Saha, P. K.; 原田 寛之; 米田 仁紀*; 道根 百合奈*; 佐藤 篤*; 柴田 崇統*; 金正 倫計; Johnson, D. E.*

Proceedings of 14th International Particle Accelerator Conference (IPAC 23) (Internet), p.2335 - 2338, 2023/09

We are studying the laser manipulations of H$$^{-}$$ ion beam for single or double neutralization for multi-dimensional applications to utilized in accelerator processes such as stripping, pulse chopping, collimation, extraction, and beam diagnostics for the present and future high-intensity proton accelerators. At J-PARC, a POP (Proof-of-Principle) demonstration 400 MeV H$$^{-}$$ stripping by using only lasers is under preparation. A prototype YAG laser system and a laser cavity system to reduce the laser power has been developed and tested for 3 MeV H$$^{-}$$ neutralization. This allows us established a new generation laser cavity system by recycling/reusing of the seed laser pulse to maximize the interaction efficiency by minimizing pulse energy of the seeder, which can be beneficial for both J-PARC and Fermilab. In addition, we are also developing non-destructive beam diagnostic systems single neutralization at lower H$$^{-}$$ energy, which will be implemented to 400 MeV and can also be easily applicable to Fermilab present Linac including future PIP-II Linac. The 400 MeV H$$^{-}$$ stripping and POP experimental study is expected to start in 2023.

論文

Development of a tool for cavity failure compensation in superconducting linacs; Progress and comparative study

Pla$c{c}$ais, A.*; Bouly, F.*; Yee-Rendon, B.

Proceedings of 14th International Particle Accelerator Conference (IPAC 23) (Internet), p.4097 - 4100, 2023/09

大強度ハドロン加速器の信頼性は、特に加速器駆動システム(ADS)にとって大きな問題となる。例として、日本原子力研究開発機構(JAEA)で検討を進めているADSでは、5分以上のビーム停止の最大頻度は年間42回に設定されている。ビーム停止の大半は加速空洞または関連するシステムの故障によって引き起こされるため、これらを効果的に削減する方法を検討した。この目的のため任意の超伝導(SC)リニアックの補償設定を、自動かつ体系的に決定することを目的とした数値ツールLightWinを開発した。このツールは、MYRRHA SCリニアックに使用されて成功した。本報告では、JAEA ADSリニアックの最後段に関連するいくつかの障害シナリオをLightWinにより補償し、関連する再調整された設定とビーム性能とを以前にTraceWinを適用し行った結果と比較した。

論文

Ionization of the muonium using the electron

北村 遼; 河村 成肇; 柴田 崇統*

Proceedings of 14th International Particle Accelerator Conference (IPAC 23) (Internet), p.1432 - 1433, 2023/05

ミュオニウムは正のミュオンと電子の結合状態である。ミュオニウムは専用のレーザーでイオン化することにより超低速ミュオンビームを生成できる。一つの提案として、高密度な電子をミュオニウムのイオン化レーザーの代替として使用することが考えられる。電子を用いたミュオニウムのイオン化について、予備的な研究を報告する。

論文

Design and optimization of a proton source extraction system for the JAEA-ADS linac

Yee-Rendon, B.; 近藤 恭弘; 田村 潤; 前川 藤夫; 明午 伸一郎

Proceedings of 14th International Particle Accelerator Conference (IPAC 23) (Internet), p.1591 - 1593, 2023/05

日本原子力研究開発機構(JAEA)は、加速器駆動システム(ADS)の開発のため、ビーム出力が30MWとなる連続波(cw)超伝導陽子線形加速器(リニアック)を設計している。JAEA-ADSリニアックのイオン源は、エネルギーが35keV、正規化されたrmsエミッタンスが0.1$$pi$$mm mrad未満で、20mAを超える陽子ビームを提供する必要がある。イオン源におけるビーム引出し部がビーム特性と品質を決定するため、目標の達成のためAXCEL-INP 2-Dシミュレーションプログラムを使用して、引き出し部の設計における幾何形状に関して最適化した。本報告は、イオン源引き出し部の設計について説明し、JAEA-ADSリニアックの陽子イオン源に関するビームダイナミクスを最初の結果として報告する。

論文

Recent status of J-PARC 3 GeV rapid cycling synchrotron

山本 風海; 山田 逸平

Proceedings of 14th International Particle Accelerator Conference (IPAC 23) (Internet), p.2339 - 2341, 2023/05

J-PARC 3GeVシンクロトロンでは、大強度陽子ビームを中性子実験施設および後段の主リングシンクロトロンに安定に供給するため、ビーム調整と高度化を行っている。近年、設計出力である1MW出力での数日間にわたる連続運転試験を行っているが、2020年の試験の結果から、6月後半以降の高温多湿な屋外環境下では、冷却水の冷却能力が低下し、加速器を安定に運転できない事が判明した。その原因を調査した結果、加速器装置を直接冷却する一次冷却水と屋外で排熱する二次冷却水の熱交換器の性能が劣化していることを突き止めた。2021年の夏季に分解洗浄による性能回復を行い、2022年6月に1MWの試験を行った。熱交換器の性能は改善されていたが、2022年6月の試験時は猛暑日となり、1MWでは運転を継続できなかった。一方、600kWであれば真夏の猛暑であっても運転できることを確認した。

5 件中 1件目~5件目を表示
  • 1