Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Hamase, Erina; Doda, Norihiro; Ono, Ayako; Tanaka, Masaaki; Miyake, Yasuhiro*; Imai, Yasutomo*
Proceedings of 14th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation, and Safety (NTHOS-14) (Internet), 12 Pages, 2024/08
We have been developed a thermal-hydraulic analysis model in the reactor vessel using the computational fluid dynamics code with a low computational cost to evaluate core-plenum interactions during a natural circulation decay heat removal using a dipped-type direct heat exchanger in a design of sodium-cooled fast reactors. In this study, we investigate the coarse mesh modeling of interwrapper gap (IWG) using correlations for the purpose of the development of a practical model which can reduce the computational cost maintaining the prediction accuracy. An influence of combinations of the coarse mesh and the correlation for pressure loss in the IWG on the thermal-hydraulics and the core temperature distribution is revealed through the numerical analysis of a sodium experiment.
Morita, Koji*; Yamano, Hidemasa
Proceedings of 14th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation, and Safety (NTHOS-14) (Internet), 12 Pages, 2024/08
This paper describes the generalized model developed for these eutectic reactions between boron carbide (B
C) and stainless steel (SS) as well as for the reactions that occur between eutectic reaction products in the solid and liquid states and SS or BC. We also describe the thermophysical property model based on thermophysical property data.
Kikuchi, Shin; Kondo, Toshiki; Doi, Daisuke; Seino, Hiroshi; Ogawa, Kengo*; Nakagawa, Takeshi*
Proceedings of 14th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation, and Safety (NTHOS-14) (Internet), 12 Pages, 2024/08
Yamano, Hidemasa; Takai, Toshihide; Emura, Yuki; Fukuyama, Hiroyuki*; Higashi, Hideo*; Nishi, Tsuyoshi*; Morita, Koji*; Nakamura, Kinya*; Ahmed, Z.*; Pellegrini, M.*
Proceedings of 14th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation, and Safety (NTHOS-14) (Internet), 12 Pages, 2024/08
This paper describes the project overview and progress of experimental and analytical studies conducted until 2022. A specific result in this paper is to obtain first experimental data of BC-SS eutectic freezing.
C-stainless steel using the Moving Particle Semi-Implicit (MPS) MethodAhmed, Z.*; Wu, S.*; Pellegrini, M.*; Okamoto, Koji*; Sharma, A.*; Yamano, Hidemasa
Proceedings of 14th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation, and Safety (NTHOS-14) (Internet), 14 Pages, 2024/08
The analysis show that once eutectic reaction occurs, the boron diffuses into the stainless steel (SS) wall. Melting initiates at the BC and SS interface, with melt flow following SS cladding penetration. Also, we observed that as temperature rises, a proportional increase in the boron concentration within the melt. The updated MPS method indicated a computational capability of the eutectic reaction model used to effectively analyze control rod eutectic reactions, simulating severe accidents, and its subsequent relocation to understand the effect of BC ingress into the core.
Yamano, Hidemasa; Futagami, Satoshi; Higurashi, Koichi*
Proceedings of 14th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation, and Safety (NTHOS-14) (Internet), 12 Pages, 2024/08
This paper describes the application of safety design criteria (SDC) and safety design guidelines (SDG) developed in the Generation-IV International Forum on the natural circulation of sodium to sodium-cooled fast reactors (SFRs) recently designed in Japan.