Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Tanaka, Masaaki; Enuma, Yasuhiro; Okano, Yasushi; Uchibori, Akihiro; Yokoyama, Kenji; Seki, Akiyuki; Wakai, Takashi; Asayama, Tai
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 11 Pages, 2023/05
Uesawa, Shinichiro; Yamashita, Susumu; Shibata, Mitsuhiko; Yoshida, Hiroyuki
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 9 Pages, 2023/05
For contaminated water management in decommissioning Fukushima Daiichi Nuclear Power Stations, reduction in water injection, intermittent injection water and air cooling are considered. However, since there are uncertainties of fuel debris in the PCV, it is necessary to examine and evaluate optimal cooling methods according to the distribution state of the fuel debris and the progress of the fuel debris retrieval work in advance. We have developed a method for estimating the thermal behavior in the air cooling, including the influence of the position, heat generation and the porosity of fuel debris. Since a large-scale thermal-hydraulics analysis of natural convection is necessary for the method, JUPITER developed independently by JAEA is used. It is however difficult to perform the large-scale thermal-hydraulics analysis with JUPITER by modeling the internal structure of the debris which may consist of a porous medium. Therefore, it is possible to analyze the heat transfer of the porous medium by adding porous models to JUPITER. In this study, we report the validation of JUPITER applied the porous model and discuss which heat transfer models are most effective in porous models such as series, parallel and geometric mean models. To obtain validation data of JUPITER for the natural convective heat transfer analysis around the porous medium, we performed the heat transfer and the flow visualization experiments of the natural convection in the experimental system including the porous medium. In the comparison between the experiment and the numerical analysis with each model, the numerical result with the geometric mean model was the closest of the models to the experimental results. However, the numerical results of the temperature and the velocity were overestimated for those experimental results. In particular, the temperature near the interface between the porous medium and air was more overestimated.
Shiba, Shigeki*; Iwahashi, Daiki*; Okawa, Tsuyoshi*; Gunji, Satoshi; Izawa, Kazuhiko; Suyama, Kenya
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 9 Pages, 2023/05
The Nuclear Regulation Authority (NRA) has tackled the experimental approach for determining the criticality of pseudo-fuel debris plausibly simulating actual fuel debris since 2014, collaborating with the Japan Atomic Energy Agency. To elucidate the characteristics of the pseudo-fuel debris, the Japan Atomic Energy Agency modified the STACY (STAtic experiment Critical facilitY) to conduct critical experiments simulating fuel debris. Thus, we proposed three types of modified STACY core configurations. In critical experiments in the modified STACY core, it is important to judge whether the proposed modified STACY core configurations are representative of molten core-concrete interaction debris or not. In this study, we built pseudo-fuel debris models considering a volume ratio of pseudo-fuel debris to moderation (V
/V
) and calculated uncertainty-based similarity values (C
) between the modified STACY core configurations and pseudo-fuel debris models using Tools for Sensitivity and Uncertainty Analysis Methodology Implementation-Indices and Parameters (TSUNAMI-IP) in SCALE 6.2. Consequently, the modified STACY core configuration loading structure rods we proposed completely resulted in high similarity to the pseudo-fuel debris models through V
/V
values. The main contributions to C values were 
U 
, U 
, and 
Fe (n,
), except for the pseudo-fuel debris model, including extremely high concrete components.
Iwamoto, Toshihiro; Saito, Madoka*; Takahatake, Yoko; Watanabe, So; Watanabe, Masayuki; Naruse, Atsuki*; Tsukahara, Takehiko*
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 4 Pages, 2023/05
Applicability of temperature swing extraction technology employing monoamides was examined for uranium contaminated waste treatment procedure. Separation experiments on simulated target solution with three kinds of monoamides with different structure showed that Ce(IV) in the solution was selectively recovered by the temperature swing extraction operation. Based on the experiments, an appropriate monoamide for the procedure was selected.
Choi, B.; Nishida, Akemi; Takito, Kiyotaka; Tsutsumi, Hideaki*; Takada, Tsuyoshi
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 8 Pages, 2023/05
no abstracts in English
Okita, Shoichiro; Mizuta, Naoki; Takamatsu, Kuniyoshi; Goto, Minoru; Yoshida, Katsumi*; Nishimura, Yosuke*; Okamoto, Koji*
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 10 Pages, 2023/05
Ozaki, Yusuke; Ishii, Eiichi
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 8 Pages, 2023/05
This study aims to verify the estimated hydrogeological model by simulating the monitoring data of pore pressure for longer than 14 years around Horonobe Underground Research Laboratory (URL). A previous study estimated hydrogeological structure around the URL by simulating the monitoring data for 1 year. The subsequent monitoring data of hydraulic head at the same location enabled to validate the hydrogeological structure.
Tuya, D.; Nagaya, Yasunobu
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 8 Pages, 2023/05
Adjoint angular neutron flux is used as weighting function in various reactor applications such as calculation of kinetics parameters, importance sampling variance reduction techniques, etc. Iterated fission probability (IFP), which is proportional to a fundamental mode of adjoint angular neutron flux, has increasingly been used as weighting function in Monte Carlo calculations. The Monte Carlo based IFP methods stochastically estimate IFP for a given phase-space location. In this work, we investigated the applicability of a deep neural network for approximating an unknown underlying function, which maps from a phase-space location to an IFP in a given fissile system, from dataset produced by a Monte Carlo based IFP method. The preliminary application has been performed for the Godiva and simplified STACY cores. The comparison showed a varying degree of agreement and discrepancy between the results by the DNN and the reference results by a deterministic neutron transport code PARTISN.
Horiguchi, Naoki; Yoshida, Hiroyuki; Kitatsuji, Yoshihiro; Hasegawa, Makoto*; Kishimoto, Tadafumi*
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 7 Pages, 2023/05
From the viewpoint of energy security in Japan and reduction of the environmental load, continuous operation of light water reactors is essential. Since a pH adjuster with enriched Li-7 ions is required for water quality control on PWR, the development of Li-7 enrichment technology is one of the key issues. The multi-channel counter-current electrophoresis (MCCCE) method has been developed as the technology with a low environmental load. To put this method into practical use, it is necessary to understand Li-7 ion behavior in the channel flow and optimize the experimental condition to separate Li-7 and its isotope. In this paper, to understand Li-7 ion behavior in a single channel of the experimental apparatus, a numerical simulation method based on a computational fluid dynamics (CFD) code with a particle tracking method, TPFIT-LPT, was developed. In the method, the motion of multiple ions under the electric field was simulated as a particle with an added velocity by the electric field. The difference in the isotopes was represented by changing of the magnitude of the added velocity. We also considered that although it is impossible to measure the behavior of each ion, it is important to measure the flow velocity of the bulk fluid for the validation of the numerical simulation. We developed a lab-scale experimental apparatus in which the single channel of the actual apparatus was simplified to measure the flow velocity by Particle Image Velocimetry (PIV). We set a pulsation flow condition on the lab-scale experiment, which is one of difficult conditions for the numerical simulation, and measured the velocity. As the result, we confirmed that the pulsation flow was reproduced. We set the measured data as the inlet boundary condition of the numerical simulation and conducted it. As the numerical result, we confirmed the ions affected by the electric field moved upstream with pulsation. We also confirmed the effect of the electric field on the motion of the isotope.
Ishii, Katsunori; Aoki, Takeshi; Isaka, Kazuyoshi; Noguchi, Hiroki; Shimizu, Atsushi; Sato, Hiroyuki
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 9 Pages, 2023/05
Aoki, Takeshi; Shimizu, Atsushi; Noguchi, Hiroki; Kurahayashi, Kaoru; Yasuda, Takanori; Nomoto, Yasunobu; Iigaki, Kazuhiko; Sato, Hiroyuki; Sakaba, Nariaki
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 9 Pages, 2023/05
The safety design philosophy is developed for the HTTR (High Temperature Engineering Test Reactor) heat application test facility connecting high temperature gas-cooled reactor (HTGR) and the hydrogen production plant. The philosophy was proposed to apply proven conventional chemical plant standards to the hydrogen production facility for ensuring public safety against anticipated disasters caused by high pressure and combustible gases. The present study also proposed the safety design philosophy to meet specific safety requirements identified to the nuclear facilities with coupling to the hydrogen production facility such as measures to ensure a capability of normal operation of the nuclear facility against a fire and/or explosion of leaked combustible material, and fluctuation of amount of heat removal occurred in the hydrogen production plant. The safety design philosophy will be utilized to establish its basic and detailed designs of the HTTR-heat application test facility.
Nomoto, Yasunobu; Mizuta, Naoki; Morita, Keisuke; Aoki, Takeshi; Okita, Shoichiro; Ishii, Katsunori; Kurahayashi, Kaoru; Yasuda, Takanori; Tanaka, Masato; Isaka, Kazuyoshi; et al.
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 7 Pages, 2023/05
Okuda, Yukihiko; Takito, Kiyotaka; Nishida, Akemi; Li, Y.
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 9 Pages, 2023/05
After the Great East Japan earthquake and the accident at the TEPCO's Fukushima Daiichi Nuclear Power Stations in March 2011, the regulation for nuclear power plants (NPPs) has been enhanced to take countermeasures against beyond-design-basis events. To improve the seismic safety of nuclear facilities against earthquakes that exceed the design input ground motion, the importance of seismic probabilistic risk assessment (PRA) has drawn much attention. It is essential to evaluate the realistic seismic response of the equipment and piping in NPPs for fragility assessment in seismic PRA. In particular, since piping systems have plant-specific complex route geometries, it is known that the arrangement and stiffness of piping support structures have a significant impact on seismic response characteristics of the entire piping system. In contrast, the current seismic design procedure adopts an evaluation method assuming an elastic response. To construct a realistic seismic response analysis method for excessive input ground motion exceeding the elastic response, it is desired to develop an elastic-plastic response analysis method that can estimate the realistic response of piping systems including pipe support structures. In this study, the applicability of the method is confirmed by the simulation analysis of the elasto-plastic response for the piping support structure loading test previously reported. Moreover, based on the good correlation between the ductility factor and the damage status obtained from the test results and simulation analysis results, it is shown that the ductility factor is effective as a damage evaluation index for piping support structures.
Kurisaka, Kenichi
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 10 Pages, 2023/05
This study aims to understand a time trend of the occurrence rate of steam generator (SG) tube leak in the existing sodium-cooled fast reactors (SFRs) based on the observed data. The target on SFRs in the present paper is Phenix in France and BN600 in Russia. From the open literature review, we investigated the number of tube-to-tube plate weld, the number of tube-to-tube weld, heat transfer area of tube base metal, operating time of SGs, dates when SG tube leak occurred, leaked location, corrective action after tube leak such as replacement of leaked module. Based on these observed data, time to leak is estimated and then time trend of the occurrence rate of SG tube leak for each of the above-mentioned parts was quantitatively analyzed by the hazard plotting method. As a result, the rate of leak at tube-to-tube weld in Phenix shows increase with time due to probable cause of cyclic thermal stress in a short term. As for a long-term trend, the rate of tube leak in both Phenix and BN600 SGs indicated decrease with time probably thanks to improvement in welding and in SG operating condition and to removal of initial failure.
Watanabe, So; Takahatake, Yoko; Hasegawa, Kenta; Goto, Ichiro*; Miyazaki, Yasunori; Watanabe, Masayuki; Sano, Yuichi; Takeuchi, Masayuki
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 6 Pages, 2023/05
Hasegawa, Kenta; Goto, Ichiro*; Miyazaki, Yasunori; Ambai, Hiromu; Watanabe, So; Watanabe, Masayuki; Sano, Yuichi; Takeuchi, Masayuki
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 5 Pages, 2023/05
Watakabe, Tomoyoshi; Okuda, Takahiro; Okajima, Satoshi
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 5 Pages, 2023/05
A three-dimensional seismic isolation system is planed for application to the conceptual design of a sodium-cooled fast reactor (SFR) in Japan. The crossover piping is laid between the nuclear building with the isolation system and the turbine building without the isolation system. A large displacement of the nuclear building with the isolation system is imposed on the crossover piping, which situation is a particular seismic issue because of the isolation system employment. Furthermore, it should be considered that the SFR operates at elevated temperatures compared with light water reactors. In this study, seismic evaluation using an example of a crossover piping layout was performed in accordance with the elevated temperature code of Japan Society of Mechanical Engineers. According to the evaluation results and the up to date technologies such as knowledge obtained from existing dynamic failure tests of piping components, an appropriate seismic evaluation method for the crossover piping was studied.
Aizawa, Kosuke; Hiyama, Tomoyuki; Kobayashi, Jun; Kurihara, Akikazu
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 6 Pages, 2023/05
Self-actuated shutdown system (SASS) is a passive reactor-shutdown system that utilizes a Curie-point electromagnet (CPEM), which features the characteristic of loss in magnetism when the magnet temperature reaches the Curie point. A control rod with SASS is inserted into the core by gravity without recourse to any active shutdown system. To allow the SASS to effectively function, efficiently guiding high-temperature fluid from the fuel assembly to CPEM is important. Therefore, CPEM features a complicated shape such as having 45 fins, and a flow collector is installed upstream of CPEM to direct the flow from the fuel subassembly outlet to CPEM. In this report, the water experiment was performed on the full-scale model that simulates from the outlets of the fuel assemblies to the SASS flow collector, and flow phenomena around the temperature sensing part was analyzed from the data obtained by PIV measurement.
Ueki, Yoshitaka*; Hashimoto, Shunsaku*; Shibahara, Masahiko*; Aizawa, Kosuke; Ara, Kuniaki
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 5 Pages, 2023/05
Konno, Chikara; Kochiyama, Mami; Hayashi, Hirokazu
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 9 Pages, 2023/05
JENDL-5 released in 2021 includes enough cross section data for neutron activation calculations. Thus we have produced ORIGEN and ORIGEN-S libraries from JENDL 5. We also produced the similar libraries from JENDL/AD-2017 for comparison. Analyses of the JPDR decommissioning data with these libraries demonstrated that the libraries had no problem.
