Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Miyai, Hiromitsu; Suzuki, Miho; Kanazawa, Hiroyuki
Proceedings of 54th Annual Meeting of Hot Laboratories and Remote Handling (HOTLAB 2017) (Internet), 4 Pages, 2017/00
In the Reactor Fuel Examination Facility (RFEF) of Japan Atomic Energy Agency (JAEA), Post Irradiation Examinations (PIEs) have been carried out for a long time in order to verify the reliability and the safety of the nuclear fuels irradiated in nuclear power plants. Samples for the PIEs are small and have various shapes. In order to facilitate the handling of the samples using a manipulator, the several kinds of jigs have been used for PIEs at RFEF. Those jigs are usually manufactured by machining process. We tried to make the jigs, which is PLA resin, with 3D printer and instead of machining process for the reduction of the manufacturing time and the improvement of the dimensional accuracy of the jig this time. It became clear that the actual dimensions of the jigs manufactured with 3D printer were roughly smaller at the concave section and larger at the convex section compared with the dimensions of the plan. So it is necessary to make a plan for the jigs after consideration of the characteristic of the 3D printer. The jigs can be applied to SEM observation, because the deposition of carbon film onto the jigs was well. And the jigs can be used to for the metallography, because the jigs were applicable without any harmful effects on polishing and etching processes.
Furusawa, Akinori; Nishimura, Akihiko; Takenaka, Yusuke*; Nakamura, Kaori*
Proceedings of 54th Annual Meeting of Hot Laboratories and Remote Handling (HOTLAB 2017) (Internet), 6 Pages, 2017/00
Testing of concrete structures in NPPs is needed to guarantee hereafter workability. Recent work says Core Concrete Reaction advances erosion of the concrete structures of Fukushima NPPs and it's difficult to estimate the correct depth of CCR. In addition, it is clear that seawater intrusion makes the rebar in the concrete structures corroded, thus, advanced remote testing methods for the deterioration should be considered. Gap or decrease of the adhesiveness between rebar and outer concrete appears in its deterioration process. We had a sense of possibility introducing a new testing method based on that. The concept is to propagate laser-excited ultrasonic gathering the information about the deterioration inside and received at distance with LDV. In this work, we investigate and report how it has the effect on propagating ultrasonic along the rebar to decrease adhesiveness between the rebar and the concrete experimentally.
Sasaki, Shinji; Tanno, Takashi; Maeda, Koji
Proceedings of 54th Annual Meeting of Hot Laboratories and Remote Handling (HOTLAB 2017) (Internet), 6 Pages, 2017/00
During irradiation in a fast reactor, the microstructure change of the mixed oxide fuels and the changes of element distributions occur because of a radial temperature gradient. Therefore, it is important to study the irradiation behavior of MA-MOX for advancement of fast reactor fuels. In order to make detailed observations of microstructure and elemental analyses of MA-MOX, irradiated MA-MOX specimens were carried out PIE by using a FE-SEM equipped with WDX. Because fuel samples have high radio activities and emit alpha-particles, the instrument was modified. the instrument was installed in a lead shield box and the control unit was separately located outside the box. The microstructure changes were observed in irradiated MA-MOX specimen. The characteristic X-rays peaks were detected successfully. By measuring the intensities of characteristic X-rays, it was tried quantitative analysis of U, Pu, Am along radial direction of irradiated specimen.
Daido, Hiroyuki; Kawatsuma, Shinji; Kojima, Hisayuki; Ishihara, Masahiro; Nakayama, Shinichi
Proceedings of 54th Annual Meeting of Hot Laboratories and Remote Handling (HOTLAB 2017) (Internet), 8 Pages, 2017/00
Shibata, Akira; Nakamura, Natsuki; Naka, Michihiro
Proceedings of 54th Annual Meeting of Hot Laboratories and Remote Handling (HOTLAB 2017) (Internet), 11 Pages, 2017/00
An earthquake with magnitude 9.0 hit eastern Japan on 11th March 2011. It is known as "The 2011 Great East Japan Earthquake". The JMTR hot laboratory was damaged by the earthquake. This paper describes various damages on the JMTR Hot Laboratory caused by the earthquake. In the concrete cell, an electric lock of the shielding door of a hot cell was broken by the earth quake. Cracks were found in the walls of hot laboratory building. The exhaust stack of JMTR Hot Laboratory is a part of gaseous waste treatment system. Thinning was found at anchor bolts on base of the stack in 2015. When thinning of anchor bolts were investigated, gaps between anchor bolt nuts and flange plate were found. It was concluded that the thinning was caused by water infiltration over a long period of time and the gaps were caused by elongation of thinning part of anchor bolts by series of earthquakes start from the 2011 Great East Japan Earthquake.
Sugaya, Yuki; Sakazume, Yoshinori; Akutsu, Hideyuki; Inoue, Toshihiko; Yoshimochi, Hiroshi; Sato, Soichi; Koyama, Tomozo; Nakayama, Shinichi
Proceedings of 54th Annual Meeting of Hot Laboratories and Remote Handling (HOTLAB 2017) (Internet), 8 Pages, 2017/00
The Japan Atomic Energy Agency has been developing the research and development facilities, "Okuma Analysis and Research Center", in order to ascertain the properties of radioactive wastes and fuel debris towards the decommissioning of TEPCO's Fukushima Daiichi Nuclear Power Station. This paper outlines the concept of "Laboratory-1" which will analyze low and medium level samples in the Okuma Analysis and Research Center with a focus on the research plan.
Ito, Masayasu; Ogawa, Miho; Inoue, Toshihiko; Yoshimochi, Hiroshi; Koyama, Shinichi; Koyama, Tomozo; Nakayama, Shinichi
Proceedings of 54th Annual Meeting of Hot Laboratories and Remote Handling (HOTLAB 2017) (Internet), 7 Pages, 2017/00
Laboratory-2 of the Okuma Analysis and Research Center will be used for the technological development of techniques to treat and dispose fuel debris, etc. The specific analytical content and its importance has been discussed by an experts committee in FY 2016. The committee regarded fuel debris retrieval and criticality control related topics as the most important content. As a result, it will be a priority to introduce equipment to perform examination such as shape and size measurement, compositional and nuclide analysis, hardness and toughness test, and radiation dose rate measurement. In addition, since sample will have high dose rates (1 Sv/h or more) at the time of reception, hot cells with enough radiation shielding ability will be used. In the hot cell, the pre-processing will be performed, such as cutting and dissolution of samples. Processed samples will be examined in concrete cells, steel cells, glove boxes and fume hoods. Detail design of Laboratory-2 started on FY 2017.
Shiina, Hidenori; Ono, Katsuto; Nishi, Masahiro; Nihei, Yasuo
Proceedings of 54th Annual Meeting of Hot Laboratories and Remote Handling (HOTLAB 2017) (Internet), 7 Pages, 2017/00
The Research Hot Laboratory (RHL) in Japan Atomic Energy Agency (JAEA) is the first facility in Japan for the post irradiation examination (PIE) on reactor fuels and structural materials, which had contributed to advancement of the fuels and materials since 1961. The building of RHL consists of two stories above ground and a basement, in which 10 heavy concrete and 38 lead cells were installed. In RHL, all operations for PIE had been completed in 2003. Then the decommissioning program has been implemented in order to promote the rationalization of research facilities in JAEA. As the first step of the program, PIE apparatuses and irradiated samples were removed from the cells, which have been managed as radioactive wastes. The dismantling of lead cells was initiated in 2005. At present 26 lead cells are successfully dismantled. This paper shows technical review of dismantling operations for the lead cells.
Ishikawa, Takashi; Onishi, Takashi; Hirosawa, Takashi; Tanaka, Kosuke; Katsuyama, Kozo
Proceedings of 54th Annual Meeting of Hot Laboratories and Remote Handling (HOTLAB 2017) (Internet), 10 Pages, 2017/00
Inoue, Toshihiko; Ogawa, Miho; Sakazume, Yoshinori; Yoshimochi, Hiroshi; Sato, Soichi; Koyama, Shinichi; Koyama, Tomozo; Nakayama, Shinichi
Proceedings of 54th Annual Meeting of Hot Laboratories and Remote Handling (HOTLAB 2017) (Internet), 7 Pages, 2017/00
Decommissioning of TEPCO's 1F is in progress according to the Roadmap. The Roadmap assigned the construction of a hot laboratory and analysis to the JAEA. The hot laboratory, Okuma Analysis and Research Center consists of the three buildings; Administrative building, the Laboratory-1 and Laboratory-2. The Laboratory-1 and Laboratory-2 are hot laboratories. Laboratory-1 is for radiometric analysis of low and medium level radioactive rubble and secondary wastes. The license of the Laboratory-1's implementation was approved by The Secretariat of the Nuclear Regulation Authority and the construction started in April 2017 and plans an operational start in 2020. Laboratory-2 provides concrete cells, steel cells for the analysis of the fuel debris and high level radioactive rubble. The Laboratory-2's major analysis items is reviewed by review meeting organized of cognoscente.
Sato, Yoshiyuki; Aono, Ryuji; Konda, Miki; Tanaka, Kiwamu; Ueno, Takashi; Ishimori, Kenichiro; Kameo, Yutaka
Proceedings of 54th Annual Meeting of Hot Laboratories and Remote Handling (HOTLAB 2017) (Internet), 13 Pages, 2017/00
no abstracts in English
Shizukawa, Yuta; Sekio, Yoshihiro; Sato, Isamu*; Maeda, Koji
Proceedings of 54th Annual Meeting of Hot Laboratories and Remote Handling (HOTLAB 2017) (Internet), 5 Pages, 2017/00
Electrochemical corrosion behavior under salt water in a type 304L stainless steel used to a part of BWR core materials was investigated to evaluate the possibility of crevice corrosion occurrence for the fuel assemblies which experienced seawater exposure in Fukushima Daiichi Nuclear Power Plant (1F) accident. Especially, focusing on the upper end plug part having the 304L SS crevice structure, measurement of repassivation potential for crevice corrosion () were carried out using the crevice test pieces fabricated by 304L SS plates. From the results, was lower than the spontaneous potential () when the conditions of 2500 ppm chloride ion concentration at over 50 C or that of 2500 ppm at over 80 C, which are included in the SFP water quality conditions. Therefore, in the 304L SS parts of the 1F fuel assemblies that experienced seawater exposure, there is a possibility of crevice corrosion occurrence.
Nakamura, Natsuki; Shibata, Akira; Naka, Michihiro
Proceedings of 54th Annual Meeting of Hot Laboratories and Remote Handling (HOTLAB 2017) (Internet), 4 Pages, 2017/00
no abstracts in English
Matsueda, Makoto; Irisawa, Eriko; Kato, Chiaki; Matsui, Hiroki
Proceedings of 54th Annual Meeting of Hot Laboratories and Remote Handling (HOTLAB 2017) (Internet), 4 Pages, 2017/00
In the PUREX method, spent fuels are dissolved with nitric acid media. The reprocessing solution containing Fission Products derived from spent fuels is very corrosive to metal materials, the corrosion problem often appears on the surface stainless steel devices. The oxidizing metal ions such as Ruthenium (Ru) and Neptunium (Np) in the process solution is the key reason for severe corrosion of stainless steel. In order to obtain the corrosion rate of stainless steel, we installed the corrosion test apparatus inside an airtight concrete cell in a hot laboratory (the WAste Safety TEsting Facility (WASTEF) of the Japan Atomic Energy Agency), and performed the corrosion tests of stainless steel in the heated nitric acid solution containing Np. The corrosion tests were performed in the temperature range from room temperature to boiling point for 500 hours per batch. The results show that the presence of Np accelerate the stainless steel corrosion in the nitric acid solution.