Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
山本 真人*; 鬼沢 邦雄; 吉本 賢太郎*; 小川 琢矢*; 馬渕 靖宏*; Valo, M.*; Lambrecht, M.*; Viehrig, H.-W.*; 三浦 直樹*; 曽根田 直樹*
Small Specimen Test Techniques; 6th Volume (ASTM STP 1576), p.53 - 69, 2015/05
4mm厚のミニチュア破壊靭性試験片(微小C(T))によるマスターカーブ法の適用性を検証するため、日本の原子炉圧力容器鋼から採取した破壊靭性試験片を用いて、国内外の研究機関や産業界の参加を得てラウンドロビン試験を実施した。ASTM E1921規格に従って試験を行い、得られた破壊靭性参照温度の比較から、微小C(T)から得られる参照温度のばらつきは規格に示されている不確実さの範囲とほぼ同等であり、微小試験片に対するマスターカーブ法の有効性を確認した。また、本報では各機関が行った試験結果を取りまとめて統計処理を行い、参照温度
には大きな相違はなく、標準サイズの試験片との寸法効果も認められないことが確認できた。
伊藤 譲; 齋藤 正博*; 阿部 勝憲*; 若井 栄一
Small Specimen Test Techniques; 6th Volume (ASTM STP 1576), p.209 - 224, 2015/00
Crack growth is a one of the key mechanical properties of the design evaluation in fusion materials to be tested at the High Flux Test Module (HFTM) in IFMIF. In the IFMIF/EVEDA project under the BA agreement, effect of hydrogen on the crack growth in F82H steel was investigated by using the relatively small size specimen. The shape of an Wedge Opening Load (WOL) specimen is adapted as a miniaturized specimen because the loading mechanism of WOL specimen is relatively simple compared to that of the other notched specimen. The hydrogen charging process was conducted for about 600 hours in the electrolytic solution with the current density of -2 mA/cm at 35
C. And then, the testing load,
= 30 MPa
, was applied to the specimen for about 337 hours at room temperature in air as the crack growth rate test. From these results, the small size specimen used in this study is thought to be adequate to evaluate the effect of hydrogen on the crack behavior in F82H steel.