Refine your search:     
Report No.
 - 
Search Results: Records 1-20 displayed on this page of 32

Presentation/Publication Type

Initialising ...

Refine

Journal/Book Title

Initialising ...

Meeting title

Initialising ...

First Author

Initialising ...

Keyword

Initialising ...

Language

Initialising ...

Publication Year

Initialising ...

Held year of conference

Initialising ...

Save select records

Journal Articles

Evaluation of the cryogenic tensile properties for aramid fiber rod

Saito, Toru; Okubo, Toshikazu*; Izumi, Keisuke*; Okawa, Yoshinao*; Kobayashi, Norihiro*; Yamazaki, Toru; Kawano, Katsumi; Isono, Takaaki

Teion Kogaku, 50(8), p.400 - 408, 2015/08

Aramid fiber-reinforced plastic (AFRP) has been developed as a structural material that has the advantages of light weight and high strength. In this study, tensile tests were carried out to measure the tensile properties of AFRP rod on the market for reinforcement of concrete at room temperature, 77 K and 4.2 K. Especially at cryogenic temperatures, it is difficult to perform a tensile test of the bar because the specimen slips through the jig grip. To prevent the rod from slipping, tensile tests were carried out with some filling conditions. The applicable and appropriate tensile test conditions were established by modifying the jig grip, treating the surface of the rod and using cryogenic epoxy infill to grip the rod. They were more than 1100 MPa. Additionally, the AFRP rod included a temperature dependence in which the Young's modulus increased as the test temperature decreased. It was confirmed that the Young's modulus increased because aramid fiber was more dominant than epoxy.

JAEA Reports

Dataset of the relationship between unconfined compressive strength and tensile strength of rock mass

Sugita, Yutaka; Yui, Mikazu

JNC-TN8450 2001-007, 16 Pages, 2002/02

JNC-TN8450-2001-007.pdf:0.78MB

This report summary the dataset of the relationship between unconfined compressive strength and tensile strength of the rock mass described in supporting report 2; repository design and engineering technology of second progress report (H12 report) on research and development for the geological disposal of HLW in Japan.

Journal Articles

Radiation crosslinking of rubber

Makuuchi, Keizo

Nippon Gomu Kyokai-Shi, 75(2), p.85 - 89, 2002/02

no abstracts in English

Journal Articles

Reduction of protein content by RVNRL

Makuuchi, Keizo; Haque, M. H.*; Ikeda, Kenichi*; Yoshii, Fumio; Kume, Tamikazu

Nippon Ratekkusu Arerugi Kenkyukai Kaishi, 4(1), p.7 - 10, 2001/01

no abstracts in English

Journal Articles

Evaluation of high temperature tensile and greep properties of light water reactor coolant piping materials for severe accident analyses

Harada, Yuhei; Maruyama, Yu; Maeda, Akio*; Chino, Eiichi; Shibazaki, Hiroaki*; Kudo, Tamotsu; Hidaka, Akihide; Hashimoto, Kazuichiro; Sugimoto, Jun

Journal of Nuclear Science and Technology, 37(6), p.518 - 529, 2000/06

no abstracts in English

JAEA Reports

Material test data of SUS304

; *

JNC-TN9450 2000-001, 1370 Pages, 1999/10

JNC-TN9450-2000-001.pdf:117.18MB

This report summarizes the material test data of SUS304. Numbers of the data are as follows. (1)Tensile tests 738 (Post-irradiation: 250, others: 488) (2)Creep tests 434 (Post-irradiation: 89, others: 345) (3)Fatigue tests 612 (Post-irradiation: 60, others: 552) (4)Creep-fatigue tests 200 (Post-irradiation: 40, others: 160) This report consists of the printouts from "the structural material data processing system".

JAEA Reports

Characteristics and experimental evaluation of super-heat-resisting Nb-based and Mo-based Alloys

Morinaga, Masahiko*; *; *; *

PNC-TJ9603 97-001, 95 Pages, 1997/03

PNC-TJ9603-97-001.pdf:3.95MB

[PURPOSE] Nb-based and Mo-basd alloys have been investigated in order to develop the frontiers of matelials technique which will be utililized in the environment of high-temperature liquid alkali metals. In this study, both mechanical properties and corrosion resistance to liquid Li were evaluated for two designed Mo-based alloys, Mo-15Re-0.1Zr and Mo-15Re-0.1Zr-0.1Ti. In addition, a series of corrosion test was performed with provisionally designed Nb-based alloys, Nb-(1-4)Hf. [EXPERIMENTAL METHODS] (1)High-temperature tensile test : A tensile test in the Ar atmosphere was carried out at 1473K for the designed Mo-based alloys. Commercial TZM alloy was also tested as a reference. (2)High-temperature creep test : A Creep test in the Ar atmosphere was performed at 1473K under the several applied stress levels for the designed Mo-based alloys. (3)Workability test : A three-point bend test was carried out at room temperature to evaluate the workability of the designed Mo-based alloys. (4)Corrosion resistance to liquid Li : Both the provisionally desingned Nb-based alloys and the designed Mo-based alloys were immersed in the liquid Li at 1473K. The weight change was measured as an indication of the corrosion resistance. Also, the Auger electron spectroscopy analysis was performed with several specimens to examine the surface state of them after corrosion tests. [RESULTS AND DISCUSSIONS] (1)High-temperature tensile properties : The designed Mo-based alloys were superior in the tensile properties at 1473K to the commercial TZM alloy. In fact, both the tensile and yield strengths of them were about 1.5 and 2.3 times higher than the TZM alloy, respectively. (2)High-temperature creep properties : The creep rate of the designed Mo-based alloys at 1473K was lower, compared to other solid solution hardening Mo-based alloys, but higher than the precipitation hardening TZM alloy. (3)Workability : The workability of the designed Mo-based alloys was satisfactory regardless ...

JAEA Reports

High-temperature strength test of the liner material [II]; High-temperature tensile and creep property of SM400B welded joint material

; Aoto, Kazumi;

PNC-TN9450 97-012, 75 Pages, 1996/11

PNC-TN9450-97-012.pdf:25.58MB

This report described the results of tensile and creep tests under a high temperature with the welded joints of liner plate (SM400B) used in SHTS cells of leaked sodium storage system of "NONJU plant". Results obtained are summarized as follows. (1)Foundmental high temperature strength characteristics data of the welded Joints were acquired. (2)There is no effect of heat treatment and cut-out direction on tensile strength and rupture elongation of liner plate. (3)The rupture ductility (rupture elongation and reduction of area) is lower than one of the base metal. Especially, rapidly droped in the temperature over 800 $$^{circ}$$C. (4)The creep strength of welded joint is almost same as one of the based metal. It will be estimated the effect of change of the micro-structure on the ductility. (5)Generally speaking, two phases of $$alpha$$ phase and $$gamma$$ phase intermingled exist under about 800$$^{circ}$$C, and $$alpha$$ phases transform to the $$gamma$$ phase under about 900$$^{circ}$$C over Ac3 transformation point. Then the grain boundary in HAZ, begin to grow, and the intergranular failure appears in over 900$$^{circ}$$C. The results will be applied to evaluate the stractural integrity of SHTS cells of leaked sodium storage system of "MONJU plant". (SHTS ; Secondary Heat Transfer System)

JAEA Reports

The material properties of a rolled steel for welded structure (SM400B)

Aoto, Kazumi; ;

PNC-TN9410 97-037, 51 Pages, 1996/11

PNC-TN9410-97-037.pdf:0.77MB

The basic material properties of a rolled steel for welded structure (present standard name is SM400B, old standard name SM41B) which is used as the liner plate in SHTS cells of "Monju plant". Based on the material testing data for evaluation of structural integity of the liner during sodium leakage are tentatively proposed. Main basic material properties are shown as follows. (1)The 0.2% offset yield stress (lower yield point). (2)The ultimate tensile strength. (3)The modulus of the longitudinal elasticity. (4)Static stress-strain relation. (Physical property in Ludwik equation). (5)The creep strain. (6)The linear thermal expansion coefficient. (7)The density. (8)A specific heat. (9)The thermal conductivity.

Journal Articles

Generating material strength standards of aluminum alloys for research reactors,I; Yield strength values Sy and tensile strength values Su

Tsuji, Hirokazu; Miya, Kenzo*

Nucl. Eng. Des., 155, p.527 - 546, 1995/00

 Times Cited Count:1 Percentile:83.78

no abstracts in English

JAEA Reports

Ultra-high temperature tensile properties on Mod.9Cr-1M0, 2.25Cr-1Mo and SUS321 steel(I)

; Yoshida, Eiichi;

PNC-TN9410 94-262, 120 Pages, 1994/09

PNC-TN9410-94-262.pdf:6.07MB

This study clarified the tensie properties of Mod.9Cr-1Mo, 2.25Cr-1Mo and SUS321 steels at ultra-high temperature up to 1,200$$^{circ}$$C which will be used in analysys and evaluation of the tube burst in steam generators of fast breeder reaetors. (1)Tensile strength of Mod.9Cr-1Mo, 2.25Cr-1Mo and SUS321 steels at 1,200$$^{circ}$$C were 2.5, 2,and 2.5kg/mm$$^{2}$$, respectively. (2)The difference for tensile strength and 0.2% yeild strength between specimen heat rate and heat holding time could not be found in the present. (3)The temperatures of the tube burst at the maximum internal pressure of 150kg/cm$$^{2}$$ corresponding to the practical use condition were expected to be approximately 960$$^{circ}$$C for Mod.9Cr-1M0, 860$$^{circ}$$C for 2.25Cr-1Mo and 1040$$^{circ}$$C for SUS321, respectively. These tests result will be reflected to evaluation of tube burst by sodium water reaction.

JAEA Reports

Mechanical properties on high Cr-Mo steels at elevated temperature (V); Tensile, creep and relaxation properties of Mod.9Cr-1Mo steel plate and tube for steam generator.

; *; ; Yoshida, Eiichi;

PNC-TN9410 94-261, 143 Pages, 1994/06

PNC-TN9410-94-261.pdf:2.54MB

In this study, tensile, creep and relaxation test in air were performed in order to examine the mechanical properties of Mod.9Cr-1Mo steel which is a candidate material for once throuth type steam generator of large scale fast breeder reactor. Tested materials were plate(12mmt) simulating heat exchenger tube and heat exchenger tube of Mod.9Cr-1Mo steel and 9Cr-2Mo steel was also tested as reference material. Results obtained are summarized as follows. (1)Tensile properties (a)Ultimate tensile strength and 0.2% yield strength of Mod.9Cr-1Mo steels were higher than the tentative Su and Sy values of the design allowable stress in the test temperature below 600$$^{circ}$$C. (b)Ultimate tensile strength of Mod.9Cr-1Mo steels plate and tube were higher than that of 9Cr-2Mo Steels. (3)The difference in ultimate tensile strength and 0.2% yield strength between steel plate and tube could not be found in these tests. (2)Creep properties (a)Creep rupture strength of Mod.9Cr-1Mo steel plate and tube was higher than the tentative S$$_{R}$$ value of the design creep-rupture stress intensity at 500$$sim$$600$$^{circ}$$C, and this tendency is significant in the range of longer rupture time. (b)For the relation between steady creep rate and creep rupture time, steady creep rates obtained in this study coincided well with the $$varepsilon$$$$_{m}$$ of tentative creep strain equation. (c)Creep rupture strength of Mod.9Cr-1Mo steel plate and tube was higher than that of 9Cr-2Mo steel. (3)Relaxation properties (a)In the strain range of 0.1$$sim$$0.5%, stress rapidly relaxed during the short hold time, and stress relaxation tended to be saturate beyond 50hours. These relaxation stresses became large in higher temperature and higher strain level. (b)Stress relaxation behavior was predicted approximately by tentative creep equation of Mod.9Cr-1Mo steel. The analysis of these test results is continued to develop of evaluation method of material strength.

Journal Articles

Development of comprehensive material performance database for nuclear applications

Tsuji, Hirokazu; *; Tsukada, Takashi; Nakajima, Hajime

Journal of Nuclear Science and Technology, 30(12), p.1234 - 1242, 1993/12

 Times Cited Count:3 Percentile:60.66(Nuclear Science & Technology)

no abstracts in English

JAEA Reports

Development of JAERI material performance database(JMPD) and examples of its utilization

Tsuji, Hirokazu; *; Tsukada, Takashi; Nakajima, Hajime

JAERI-M 93-204, 24 Pages, 1993/10

JAERI-M-93-204.pdf:0.79MB

no abstracts in English

Journal Articles

Reliability evaluation of nuclear structural materials through JAERI Material Performance Database(JMPD)

Tsuji, Hirokazu; *; Tsukada, Takashi; Nakajima, Hajime

Proc. of the 4th Int. Symp. on Advanced Nuclear Energy Research (JAERI-CONF 1/JAERI-M 92-207), p.426 - 433, 1992/12

no abstracts in English

JAEA Reports

None

Morinaga, Masahiko*; *; *; *; *; Kano, Shigeki; Yoshida, Eiichi

PNC-TY9623 92-001, 73 Pages, 1992/04

PNC-TY9623-92-001.pdf:6.17MB

None

Journal Articles

Generation of material strength standards of aluminum alloys for research reactors, 1; Yield strength values Sy and tensile strength values Su

Tsuji, Hirokazu; Miya, Kenzo*

Preprints of the Post SMiRT Seminar No. ll on Construction Codes and Engineering, p.3.4-1 - 3.4-19, 1991/08

no abstracts in English

JAEA Reports

Design of super-heat-resisting structural materials using a d-electron alloy theory (II)

*; Morinaga, Masahiko*; *; *; *

PNC-TJ9623 92-001, 81 Pages, 1991/07

PNC-TJ9623-92-001.pdf:6.46MB

[PURPOSE] For structural materials serviced in the Li environments, both Nb-based and Mo-based alloys are selected as the candidate materials. In this study, a simple method was proposed for evaluating the high temperature strength of these alloys. Also, the corrosion resistance in liquid metals was investigated in order to get fundamental information for the design and development of high performance alloys. [EXPERIMENTAL AND CALCULATING METHODS] With a variety of ternary alloys high temperature micro-hardness was measured systematically. The results were analyzed by referring to the relationship between the hardness and the tensile strength reported in previous publications. Also, some alloys designed last year were exposed to the liquid Na at 650 $$^{circ}$$C, and the attendant changes were examined with respect to the weight, microstructure and local composition of alloys. Some of the results were understood in terms of the free energy for the oxide formation of Na and other elements in alloys. Another effort to understand the corrosion properties was made by the molecular orbital calculation of the electronic states of various elements in liquid Li, K and Na. [RESULTS] The high temperature tensile strength of both the alloys was found to be predictable by using a linear relationship between the hardness and the tensile strength of room temperature to 1200 $$^{circ}$$C. The corrosion resistance was much poorer in the Nb-based alloys than in the Mo-based alloys. This is partially due to the enhancement of corrosion by the preferred oxidation of Nb and Ta in the Nb-based alloys, whereas no such oxidation took place in the Mo-based alloys. In addition, it was found from the molecular orbital calculation that Li is the liquid metal of more strongly-bonded with every alloying element, compared to K and Na liquid metals. Futhermore, it was shown that the hardness of each alloy correlated well with the atomic-size difference and also the young's modulus difference ...

JAEA Reports

None

Tsutagi, Koichi; ; Tobita, Noriyuki; ; *; *

PNC-TN8410 91-174, 40 Pages, 1991/02

PNC-TN8410-91-174.pdf:5.06MB

None

32 (Records 1-20 displayed on this page)