Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Hoshino, Yuzuru; Sakamoto, Yoshiaki; Muroi, Masayuki*; Mukai, Satoru*
JAEA-Technology 2015-015, 96 Pages, 2015/07
In order to dispose of the radioactive waste which generates from post-irradiation examination (PIE) facilities, the common evaluation method of radioactivity in wastes from PIE should be established by the actual data such as radioactivity values and the theoretical calculation. In this study, the radioactivity concentrations of 17 nuclides (H-3, C-14, Co-60, Ni-63, Sr-90, Tc-99, Cs-137, Eu-154, U-234, U-235, U-238, Pu-238, Pu-239, Pu-240, Pu-241, Am-241, Cm-244) in combustible wastes stored in NUCLEAR DEVELOPMENT CORPORATION were measured from 3 samples and the radioactivity was calculated by ORIGEN-2 based on initial contents and operation record of the spent fuel. From the comparison of the obtained data by the radiological measurement with the calculated values, the subject to be solved for establishment of the radioactivity evaluation method for PIE was extracted.
Asai, Shiho; Sakai, Akihiro; Yoshimori, Michiro; Kihara, Shinji
JAERI-Tech 2003-071, 46 Pages, 2003/08
As part of survey concerning radioactive inventory of radwastes arising from research institutes, an analytical scheme has been studied for verifying their nuclide composition based on calculation analysis and record, in consideration of the its characteristics. In this study, radwastes are used as samples, which arise from research and testing reactors and post-irradiation examination facilities (PIE facilities). Though separation procedures are simplified and rationalized, quantifiable values could be obtained with relative errors under 10% for almost all the samples containing nuclides like Ni and
U which concentrations are low, and recoveries were high on the whole. These show that the analytical scheme is useful for chemical separation of radwastes arising from research and testing reactors and PIE facilities.
Sakai, Akihiro; Yoshimori, Michiro; Abe, Masayoshi
JAERI-Tech 2000-012, p.107 - 0, 2000/03
no abstracts in English