Refine your search:     
Report No.
 - 
Search Results: Records 1-7 displayed on this page of 7
  • 1

Presentation/Publication Type

Initialising ...

Refine

Journal/Book Title

Initialising ...

Meeting title

Initialising ...

First Author

Initialising ...

Keyword

Initialising ...

Language

Initialising ...

Publication Year

Initialising ...

Held year of conference

Initialising ...

Save select records

Journal Articles

Effect of specimen size and oxygen partial pressure on creep characteristics for mod. 9Cr-1Mo steel

Kanayama, Hideyuki; Hiyoshi, Noritake*; Ito, Takamoto*; Ogawa, Fumio*; Wakai, Takashi

Zairyo, 66(2), p.86 - 92, 2017/02

This study presents creep characteristics of Mod. 9Cr-1Mo steel with various sized specimens and environment. Creep tests were performed using three different sizes of specimen and three different type of testing environment. Specimens are a bulk specimen which has 6mm diameter and 30mm gage length, a miniature specimen which has 2mm diameter and 10mm gage length and a thin plate specimen which has 0.76mm thickness, 1.5mm width and 7.62mm gage length. Three different type of testing environment are air, 99.99% Ar gas and vacuum. In the same environmental condition, there was no effect of specimen size on time to rupture. Time to rupture of Mod. 9Cr-1Mo steel in Ar gas was shorter than that in air and vacuum. Oxide thickness is not dominant factor in time to rupture. Fracture mode at specimen surface in Ar gas might be dominant factor in shorter time to rupture. Effect of specimen size and environment on creep strength of Mod. 9Cr-1Mo steel was evaluated on the basis of thinning.

JAEA Reports

Changes in tensile property and X-ray parameter for carbon fiber after high temperature heat-treatment

Saito, Tamotsu; Baba, Shinichi; Eto, Motokuni

JAERI-Research 99-070, p.21 - 0, 2000/01

JAERI-Research-99-070.pdf:1.32MB

no abstracts in English

JAEA Reports

Evaluation on materials performance of Hastelloy alloy XR for HTTR, uses-5; Creep properties of base metal and weldment in air

Watanabe, Katsutoshi; Nakajima, Hajime; Koikegami, Hajime*; Higuchi, Makoto*; Nakanishi, Tsuneo*; Saito, Teiichiro*; Takatsu, Tamao*

JAERI-Research 95-001, 58 Pages, 1995/01

JAERI-Research-95-001.pdf:4.31MB

no abstracts in English

JAEA Reports

None

*; *; *; *; *; *; *

PNC-TJ9009 91-004, 149 Pages, 1991/08

PNC-TJ9009-91-004.pdf:24.83MB

None

JAEA Reports

Mechanical properties on high Cr-Mo steels at elevated temperature.(III); Creep properties of high Cr-Mo steel forgings (250$$sim$$280mmt)

; ; Yoshida, Eiichi;

PNC-TN9410 91-099, 106 Pages, 1991/02

PNC-TN9410-91-099.pdf:5.72MB

This stady was performed in order to confirm the influence of sampling method on Creep properties of 9Cr-Mo steel forgings which are promising as candidate materials for steam generator of large scale fast breeder reactor. This results are to be reflected on fundation of materials strength standard. Test materials are four kinds of 9Cr-Mo steel forgings (thickness:250$$sim$$280mmt) such as Mod.9Cr-1Mo (F4, F8 heats), 9Cr-1Mo-Nb-V(G3 heat), 9Cr-2Mo (H6 heat) steels. Results obtained are summarized as follows. (1)In order to evaluation of fundamental material properties, creep-rupture data on three kinds of 9Cr-Mo steel forgings such as Mod.9Cr-1Mo, 9Cr-2Mo and 9Cr-1Mo-Nb-V steels was obtained up to 10,000 hours. (2)The Mod.9Cr-1Mo steel exhibited most excellent creep-rupture strength and the 9Cr-2Mo steel was the worst among the three. (3)The effect of the sampling location of specimens on creep strength was not significant for Mod.9Cr-1Mo steel. But for 9Cr-1Mo-Nb-V steel and 9Cr-2Mo steel, longer creep rupture time was observed with spcimens taken from just below the center of the surface with direction of L, and shorter creep rupture time was observed for those taken from t/2 thickness at the center with direction of Z. (4)Creep strength of 9Cr-2Mo steel was lower than that of Mod.9Cr-1Mo (F4, F8)and 9Cr-1Mo-Nb-V steel. But rupture elongation and reduction of area of 9Cr-2Mo steel was greater than hat of other three materials, irrespective of the sampling location of specimens.

Oral presentation

Development in remaining of creep life assessment method for Mod. 9Cr-1Mo steel using thin plate specimen

Kanayama, Hideyuki; Hiyoshi, Noritake*; Ogawa, Fumio*; Ito, Takamoto*; Wakai, Takashi

no journal, , 

no abstracts in English

7 (Records 1-7 displayed on this page)
  • 1