Electrochemical measurements in various environments; Corrosion monitoring of carbon steel in deep underground environment

Taniguchi, Naoki; Nakayama, Masashi

Zairyo To Kankyo, 67(12), p.487 - 494, 2018/12

This article describes the current status of corrosion monitoring methods and examples of the measurement under deep underground environments for carbon steel overpacks for high-level radioactive waste disposal. Based on the studies on corrosion monitoring using AC Impedance technique, some of the typical measurement systems such as the electrodes arrangement are introduced. In-situ corrosion monitoring in engineering scale test is also being attempted using a deep underground research facility, and the measurement method and results are presented in this article.

Systematic calibration of beam position monitor in the high intensity proton accelerator (J-PARC) linac

Sato, Susumu; Igarashi, Zenei*; Lee, S.*; Tomisawa, Tetsuo; Hiroki, Fumio; Kishiro, Junichi; Ikegami, Masanori*; Kondo, Yasuhiro; Hasegawa, Kazuo; Ueno, Akira; et al.

Proceedings of 22nd International Linear Accelerator Conference (LINAC 2004), p.429 - 431, 2004/00

As a joint project of KEK and JAERI, a MW class of high intensity proton accelerator (J-PARC), consisting of Linac, 3 GeV-RCS, 50 GeV-MR, is under construction at Tokai, Japan. For this accelerator, it is required to minimize the beam loss (typically, lower than 0.11 W/m at the linac). To achieve the requirement, beam trajectory needs to be controlled with accuracy of some 100 micro-meter. The first stage of the acceleration (up to 181 MeV during the first stage of construction) is done by linac. The beam position monitor (BPM) in the linac utilizes 4 strip-line pickups (50 ohm) on the beam transportation chamber. In this paper, systematic calibration of the BPM is described.

Application of AC-impedance method on determination of corrosion rate of metals

Suzuki, Motoe

JAERI-M 87-095, 34 Pages, 1987/07

JAERI-M-87-095.pdf:0.93MB

no abstracts in English