Achievement of safety demonstration tests using HTTR; Loss of forced cooling test at 100% reactor power (30 MW)

Nagasumi, Satoru; Hasegawa, Toshinari; Nakagawa, Shigeaki; Kubo, Shinji; Iigaki, Kazuhiko; Shinohara, Masanori; Saikusa, Akio; Nojiri, Naoki; Saito, Kenji; Furusawa, Takayuki; et al.

JAEA-Research 2025-005, 23 Pages, 2025/07

JAEA-Research-2025-005.pdf:2.68MB

A safety demonstration test under abnormal operating conditions using the HTTR (High Temperature Engineering Test Reactor) was conducted to demonstrate safety features of the HTGRs (High Temperature Gas-cooled Reactors). Under a simulation of a control rod shutdown failure, all primary helium gas circulators were intentionally stopped during a steady-state operation at 100% reactor thermal power (30 MW), temporal changes of the reactor power and temperatures around the reactor pressure vessel (RPV) were obtained after the complete loss of forced heat removal from the reactor core. After the event (primary coolant flow stopped), the reactor power quickly decreased due to the negative reactivity feedback associated with the core temperature rise, and then the reactor power spontaneously shifted to a stable state of low power (about 1.2%) even after a recriticality. Heat dissipation from RPV surface to a surrounding vessel cooling system (water-cooled panels) ensured the amount of heat removal required to maintain the reactor temperature constant in the low power state. In this way, the transition from the event occurrence to the stable and safety state, i.e., inherent safety features of HTGRs, were demonstrated in the case of core forced cooling loss without active shutdown operations.

Microstructural observation of simulated fuel kernels for Pu-burner high temperature gas-cooled reactor in Japan

Aihara, Jun; Ueta, Shohei; Honda, Masaki*; Kasahara, Seiji; Okamoto, Koji*

JAEA-Research 2024-012, 98 Pages, 2025/02

JAEA-Research-2024-012.pdf:32.24MB

Concept of Pu-burner high temperature gas-cooled reactor (HTGR) was proposed for the purpose of more safely reducing amount of recovered Pu. In Pu-burner HTGR concept, coated fuel particle (CFP), with ZrC coated yttria stabilized zirconia (YSZ) containing PuO (PuO-YSZ) small particle and with tri-structural isotropic (TRISO) coating, is employed for very high burn-up and high nuclear proliferation resistance. ZrC layer is oxygen getter. In research project of Pu-burner HTGR carried out from fiscal year of 2014 to fiscal year of 2017, simulated CFPs were fabricated using Ce to simulate Pu. Moreover, simulated fuel compacts were fabricated using fabricated simulated CFPs. In this report, results of microstructural observation of CeO-YSZ and ZrC layer at each fabrication step are reported.

Survey on research and development status of Japanese small modular reactors in OECD/NEA activities (2022-2023)

Takeda, Takeshi; Shibata, Taiju

JAEA-Review 2024-040, 29 Pages, 2024/09

JAEA-Review-2024-040.pdf:1.33MB

An important theme of Japan's 6th strategic energy plan is to indicate the energy policy path towards carbon neutrality by 2050. Policy responses for Japan's nuclear energy research and development (R&D) towards 2030 contain the demonstrations of technologies for small modular reactors (SMRs) through international cooperation by 2030. In light of this energy plan, basic policy initiatives over the next 10 years have been compiled to realize Green Transformation (GX), which simultaneously achieves decarbonization and economic growth. Looking overseas, activities of SMR R&D are active internationally, mainly in the US, Canada, Europe, China, and Russia. These activities are not only by heavy industry manufactures and R&D institutes, but also by venture companies. Under these circumstances, the NEA CSNI has gathered an Expert Group on SMRs (EGSMR) to help estimate the safety effects of SMRs. The EGSMR efforts required the submission of responses to several questionnaires whose main purpose was to collect the latest information on the efforts of SMR deployment and research. The first author of this report responded to this based on information from Hitachi-GE Nuclear Energy, Ltd. and Mitsubishi Heavy Industries, Ltd. as well as JAEA. Most of the responses from Japan to the questionnaires are the information that serves as the basis of CSNI Technical Opinion Paper No. 21 (TOP-21). In this report, the Japan's publicly available responses to the questionnaires arranged and additional information are explained, which complements some of the content of the TOP-21. In this manner, the investigation results of R&D related to SMR in Japan, focusing on the EGSMR activities (2022-2023), are summarized. The target of this report is to provide useful information for future discussions on international cooperation concerning SMR as well as nuclear power field human resources development internationally and domestically.

Data report of ROSA/LSTF experiment TR-LF-15; Accident management actions during station blackout transient with pump seal LOCA

Takeda, Takeshi

JAEA-Data/Code 2023-012, 75 Pages, 2023/10

JAEA-Data-Code-2023-012.pdf:4.45MB

An experiment denoted as TR-LF-15 was conducted on June 11, 2014 using the Large Scale Test Facility (LSTF) in the Rig of Safety Assessment-V (ROSA-V) Program. The ROSA/LSTF experiment TR-LF-15 simulated accident management (AM) actions during a station blackout transient with TMLB' scenario with pump seal loss-of-coolant accident (LOCA) in a pressurized water reactor (PWR). This scenario is featured by loss of auxiliary feedwater functions. The pump seal LOCA was simulated by a 0.1% cold leg break. The test assumptions included total failure of both high pressure injection system and low pressure injection system of emergency core cooling system (ECCS). Also, it was presumed non-condensable gas (nitrogen gas) inflow to the primary system from accumulator (ACC) tanks of ECCS. When steam generator (SG) secondary-side collapsed liquid level dropped to a certain low liquid level, the primary pressure turned to rise. After the SG secondary-side became voided, the safety valve of a pressurizer cyclically opened which led to loss of primary coolant. Core uncovery thus took place owing to core boil-off at high pressure. When an increase of 10 K was confirmed in cladding surface temperature of simulated fuel rods, SG secondary-side depressurization was started as the first AM action. At that time, the safety valves in both SGs were fully opened. Primary depressurization was initiated by completely opening the pressurizer safety valve as the second AM action with some delay after the first AM action onset. When the SG secondary-side pressure lowered to 1.0 MPa following the first AM action, water was injected into the secondary-side of both SGs via feedwater lines with low-head pumps as the third AM action. A reduction in the primary pressure was accelerated because the heat removal from the SG secondary-side system resumed shortly after the third AM action initiation.

Experiment of incineration for Trans-Uranic (TRU) wastes containing chlorides

Yamashita, Kiyoto; Yokoyama, Aya*; Takagai, Yoshitaka*; Maki, Shota; Yokosuka, Kazuhiro; Fukui, Masahiro; Iemura, Keisuke

JAEA-Technology 2022-020, 106 Pages, 2022/10

JAEA-Technology-2022-020.pdf:4.77MB

Radioactive solid wastes generated by Fukushima Daiichi Nuclear Power Station disaster may contain high levels of salt from the tsunami and seawater deliberately released into the area. It is assumed that polyvinyl chloride (PVC) products may be used for decommissioning work and for containment of radioactive wastes in the future. Among the method of handling them, incineration is one method that needs to be investigated as it is good method for reduction and stabilization of wastes. But in order to dispose of Trans-Uranic (TRU) solid waste containing chlorides, it is necessary to select the structure and materials of the facility based on the information such as the movement of nuclides and chlorides in the waste gas treating system and the corrosion of equipment due to chlorides. Therefore, we decided to get various data necessary to design a study of the incineration facilities. And we decided to examine the transfer behavior of chlorides to the waste gas treatment system, the corrosion-resistance of materials in the incineration facilities, and the distribution survey of plutonium in them obtained using the Plutonium-contaminated Waste Treatment Facility (PWTF), Nuclear Fuel Cycle Engineering Laboratories, which is a unique incinerating facility in Japan. This report describes the transfer behavior of chlorides in the waste gas treatment system, the evaluation of corrosion-resistance materials and the distribution survey of plutonium in the incineration facilities obtained by these tests using the Plutonium-contaminated Waste Treatment Facility, Nuclear Fuel Cycle Engineering Laboratories.

High-temperature gaseous reaction of cesium with siliceous thermal insulation; The Potential implication to the provenance of enigmatic Fukushima cesium-bearing material

Rizaal, M.; Nakajima, Kunihisa; Saito, Takumi*; Osaka, Masahiko; Okamoto, Koji*

ACS Omega (Internet), 7(33), p.29326 - 29336, 2022/08

https://doi.org/10.1021/acsomega.2c03525

Numerical simulation of sodium mist behavior in turbulent Rayleigh-Bnard convection using new developed mist models

Ohira, Hiroaki*; Tanaka, Masaaki; Yoshikawa, Ryuji; Ezure, Toshiki

Annals of Nuclear Energy, 172, p.109075_1 - 109075_10, 2022/07

https://doi.org/10.1016/j.anucene.2022.109075

In order to evaluate the mist behavior in the cover gas region of Sodium-cooled Fast Reactors (SFRs) in good accuracy, turbulent model for Rayleigh-Bnard convection (RBC) was selected, and the Reynolds-averaged number density and momentum equations for mist behavior were developed and incorporated into the OpenFOAM code. In the first stage, the RBC in a simple parallel channel was calculated using Favre-averaged k- SST model. The average temperature and flow characteristics agreed well with results from DNS, LES, and experiments. Then the basic heat transfer experiment simulating the cover gas region of SFRs was calculated using this turbulent model and new mist models. The calculated average temperature distribution in the height direction and the mist mass concentration agreed well with the experimental results. We developed a method that could simulate the mist behavior in turbulent RBC environments and the cover gas region of SFRs with high accuracy.

Analytical study on removal mechanisms of cesium aerosol from a noble gas bubble rising through liquid sodium pool, 2; Effects of particle size distribution and agglomeration in aerosols

Miyahara, Shinya*; Kawaguchi, Munemichi; Seino, Hiroshi; Atsumi, Takuto*; Uno, Masayoshi*

Proceedings of 28th International Conference on Nuclear Engineering (ICONE 28) (Internet), 6 Pages, 2021/08

https://doi.org/10.1115/ICONE28-63286

In a postulated accident of fuel pin failure of sodium cooled fast reactor, a fission product cesium will be released from the failed pin as an aerosol such as cesium iodide and/or cesium oxide together with a fission product noble gas such as xenon and krypton. As the result, the xenon and krypton released with cesium aerosol into the sodium coolant as bubbles have an influence on the removal of cesium aerosol by the sodium pool in a period of bubble rising to the pool surface. In this study, cesium aerosol removal behavior due to inertial deposition, sedimentation and diffusion from a noble gas bubble rising through liquid sodium pool was analyzed by a computer program which deals with the expansion and the deformation of the bubble together with the aerosol absorption considering the effects of particle size distribution and agglomeration in aerosols. In the analysis, initial bubble diameter, sodium pool depth and temperature, aerosol particle diameter and density, initial aerosol concentration in the bubble were changed as parameter, and the results for the sensitivities of these parameters on decontamination factor (DF) of cesium aerosol were compared with the results of the previous study in which the effects of particle size distribution and agglomeration in aerosols were not considered. From the results, it was concluded that the sensitivities of initial bubble diameter, the aerosol particle diameter and density to the DF became significant due to the inertial deposition of agglomerated aerosols. To validate these analysis results, the simulation experiments have been conducted using a simulant particles of cesium aerosol under the condition of room temperature in water pool and air bubble systems. The experimental results were compared with the analysis results calculated under the same condition.

Development methodology on determination of instant release fractions for generic safety assessment for direct disposal of spent nuclear fuel

Kitamura, Akira; Akahori, Kuniaki; Nagata, Masanobu*

Genshiryoku Bakkuendo Kenkyu (CD-ROM), 27(2), p.83 - 93, 2020/12

https://doi.org/10.3327/jnuce.27.2_83

Direct disposal of spent nuclear fuel (SNF) in deep underground repositories (hereafter "direct disposal") is a concept that disposal canisters stored fuel assemblies dispose without reprocessing. Behavior of radionuclide release from SNF must be different from that from vitrified glass. The present study established a methodology on determination of instant release fraction (IRF) of radionuclides from SNF, which is the one of the parameters on radionuclide release based on the latest safety assessment reports in other countries, especially for IRF values proportional to a fission gas release ratio (FGR). Recommended and maximum values of FGR have been estimated using the fuel performance code FEMAXI-7 after collecting FGR values on Japanese SNFs. Furthermore, recommended and maximum values of IRF for Japanese SNFs used in a pressurized water reactor (PWR) have been estimated using the presently obtained FGR values and experimentally obtained IRF values on foreign SNFs. The recommended and maximum IRF values obtained in the present study have been compared with those of the latest safety assessment reports in other countries.

Study on plutonium burner high temperature gas-cooled reactor in Japan; Introduction scenario, reactor safety and fabrication tests of the 3S-TRISO fuel

Ueta, Shohei; Mizuta, Naoki; Fukaya, Yuji; Goto, Minoru; Tachibana, Yukio; Honda, Masaki*; Saiki, Yohei*; Takahashi, Masashi*; Ohira, Koichi*; Nakano, Masaaki*; et al.

Nuclear Engineering and Design, 357, p.110419_1 - 110419_10, 2020/02

https://doi.org/10.1016/j.nucengdes.2019.110419

The concept of a plutonium (Pu) burner HTGR is proposed to incarnate highly-effective Pu utilization by its inherent safety features. The security and safety fuel (3S-TRISO fuel) employs the coated fuel particle with a fuel kernel made of plutonium dioxide (PuO) and yttria stabilized zirconia (YSZ) as an inert matrix. This paper presents feasibility study of Pu burner HTGR and R&D on the 3S-TRISO fuel.