Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Uwaba, Tomoyuki; Ito, Masahiro*; Ishitani, Ikuo*
JAEA-Technology 2023-006, 36 Pages, 2023/05
JAEA-Technology-2023-006.pdf:3.45MB
The BAMBOO code developed by the Japan Atomic Energy Agency is a computer code to analyze fuel pin bundle deformation in a fast reactor wire-spaced type fuel pin bundle subassembly. In this study we developed an analysis model to consider friction at the contact points between adjacent fuel pins, and at these between outermost fuel pins and a duct that are due to bundle-duct interaction. This model deals with friction forces at contact points in the contact and separation analysis of the code, and employs a convergent calculation where contact forces are gradually determined to avoid numerical instability when the friction occurs. Analyses of BAMBOO with the model showed very slight effects on the onset of contact between outer most pins and a duct, and on directions of pin displacements, within the range of practical friction coefficients.
Yamamoto, Tomohiko; Kitamura, Seiji; Iwasaki, Akihisa*; Matsubara, Shinichiro*; Okamura, Shigeki*
Proceedings of 2017 ASME Pressure Vessels and Piping Conference (PVP 2017) (CD-ROM), 10 Pages, 2017/07
To design fast reactor (FR) components, seismic response must be evaluated in order to ensure structural integrity. Therefore, a sophisticated analysis method has to be developed to study the seismic response of FR core. The fast reactors are made of several hundred core assemblies in hexagonal arrangement. When a big earthquake occurs, large horizontal displacement and impact force of each core assembly may cause a trouble for control rod insertability and core assembly intensity. Therefore, a seismic analysis method of fast reactor core considering horizontal nonlinear behavior, such as impact, fluid-structure interaction, etc. is needed. Validation of the core assembly vibration analysis code in three dimension (REVIAN-3D) was conducted by a full scale experiment. In this validation, the vertical behavior (raising displacement) and horizontal behavior (Impact force, horizontal response) of the analysis result agreed very well with the experiments.
Kikuchi, Norihiro; Imai, Yasutomo*; Yoshikawa, Ryuji; Doda, Norihiro; Tanaka, Masaaki; Ohshima, Hiroyuki
Proceedings of 25th International Conference on Nuclear Engineering (ICONE-25) (CD-ROM), 12 Pages, 2017/07
In the design study of an advanced loop-type SFR in JAEA, a specific fuel assembly (FA) named FAIDUS (Fuel Assembly with Inner DUct Structure) has been adopted as one of the measures to enhance safety of the reactor. Thermal-hydraulics evaluations of FAIDUS under various operation conditions are required to confirm its design feasibility. In this study, after the applicability of ASFRE to FAs was confirmed through the numerical analysis using simulated FA tests, thermal-hydraulic analyses of a FA without an inner duct and a FAIDUS were conducted. Through the numerical analyses, it was indicated that asymmetric temperature distribution in a FAIDUS would not be occurred and characteristics of the temperature distribution was almost the same as that in a FA without an inner duct. Under the low flow rate condition, it was expected that the local flow acceleration caused by the buoyancy force in a FAIDUS could bring the flow redistribution and make the temperature distribution flat.
Nakajima, Norihiro; Nishida, Akemi; Miyamura, Hiroko; Iigaki, Kazuhiko; Sawa, Kazuhiro
Kashika Joho Gakkai-Shi (USB Flash Drive), 36(Suppl.2), 4 Pages, 2016/10
Since nuclear power plants have dimensions approximately 100m
and their structures are an assembly made up of over 10 million components, it is not convenient to experimentally analyze its behavior under strong loads of earthquakes, due to the complexity and hugeness of plants. The proposed system performs numerical simulations to evaluate the behaviors of an assembly like a nuclear facility. The paper discusses how to carry out visual analysis for assembly such as nuclear power plants. In a result discussion, a numerical experiment was carried out with a numerical model of High Temperature engineering Test Reactor of Japan Atomic Energy Agency and its result was compared with observed data. A good corresponding among them was obtained as a structural analysis of an assembly by using visualization. As a conclusion, a visual analytics methodology for assembly is discussed.
Kikuchi, Norihiro; Ohshima, Hiroyuki; Tanaka, Masaaki; Hashimoto, Akihiko*
Dai-21-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (USB Flash Drive), 4 Pages, 2016/06
For the thermal-hydraulic design and safety assessment regarding a fuel assembly of sodium-cooled fast reactors, a subchannel analysis code ASFRE has been and is continuously developed in JAEA. In the numerical simulation of ASFRE confirmed that the tendency to overestimate the maximum coolant temperature in a fuel assembly still remains. In this study, Distributed Resistance Model (DRM), which deals with wire-spacer wrap volumetric effect in subchannels on peripheral and axial directions, was modified and its calibration factor was optimized in order to improve the prediction accuracy of the maximum coolant temperature. A numerical simulation of a 37-pin bundle sodium experiment was also carried out and the result showed the validity of the modified DRM.
Nakajima, Norihiro; Nishida, Akemi; Kawakami, Yoshiaki; Suzuki, Yoshio; Matsukawa, Keisuke*; Oshima, Masami*; Izuchi, Hisao*
Transactions of the 23rd International Conference on Structural Mechanics in Reactor Technology (SMiRT-23) (USB Flash Drive), 10 Pages, 2015/08
The digital shaking table is introduced to carry out numerical experiments for the so called STRUCTURE of a petroleum plant. In numerical experiments, STRUCTURE was precisely modelled as it is designed and meshed into fine finite elements. The components of STRUCTURE were meshed one by one, and the code of a finite element analysis for structure of assembly gathered every meshed components to run time domain response analysis. Four waves are applied to the analysis to determine its behaviour. Four waves are namely as El Centro, Taft, Hachinohe, and Geiyo. The results of experiments are discussed by comparing accumulating data in the past. It is concluded to reconfirm the methodology of gathering meshed components and a finite element analysis for structure of assembly with the STRUCTURE.
Nakajima, Norihiro; Nishida, Akemi; Kawakami, Yoshiaki; Suzuki, Yoshio; Sawa, Kazuhiro; Iigaki, Kazuhiko
Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 5 Pages, 2015/05
A numerical analysis controlling and managing system is implemented on K, which controls the modelling process and data treating, although the manager only controls a structural analysis by finite element method. The modeling process is described by the list of function ID and its procedures in a data base. The manager executes the process by order in the list for simulation procedures. The manager controls the intention of an analysis by changing the analytical process one to another. Experiments were carried out with static and dynamic analyses.
Akimoto, Hajime
JAEA-Data/Code 2014-031, 75 Pages, 2015/03
JAEA-Data-Code-2014-031.pdf:37.23MB
A thermal-hydraulic analysis code for transmutation system with lead-bismuth cooled accelerator-driven system (ADS) has been developed using the Japanese-version of Transient Reactor Analysis Code (J-TRAC) as the framework to apply the design studies of ADS. To identify the required capabilities of the thermal-hydraulic analysis code for ADS, previous thermal-hydraulic analyses of light water reactors, sodium-cooled fast reactor and ADS have been surveyed. To make up for insufficient capabilities of the J-TRAC code as a thermal-hydraulic analysis code of ADS, physical properties of lead-bismuth eutectic (LBE), argon gas and nitride nuclear fuel were implemented to the J-TRAC code. It was confirmed that the implemented capabilities worked as expected through verification calculations on (1) single-phase LBE flow, (2) heat transfer in a fuel assembly, and (3) heat transfer in a steam generator.
Nakajima, Norihiro; Nishida, Akemi; Kawakami, Yoshiaki; Okada, Tatsuo*; Tsuruta, Osamu*; Sawa, Kazuhiro; Iigaki, Kazuhiko
Proceedings of 22nd International Conference on Nuclear Engineering (ICONE-22) (DVD-ROM), 9 Pages, 2014/07
Almost all industrial products are assembled from multiple parts. A nuclear facility is a large structure consisting of more than 10 million components. This paper discusses a method to analyze an assembly by gathering data on its component parts. Gathered data on component may identify ill conditioned meshes for connecting surfaces between components. These ill meshes are typified by nodal point disagreement in finite element discretization. A technique to resolve inconsistencies in data among the components is developed. By using this technique, structural analysis for an assembly can be carried out, and results can be obtained by the use of supercomputers, such as the K computer. Numerical results are discussed for components of the High Temperature Engineering Test Reactor.
Takase, Kazuyuki; Yoshida, Hiroyuki; Ose, Yasuo*; Akimoto, Hajime
WIT Transactions on Engineering Sciences, Vol.50, p.183 - 192, 2005/00
no abstracts in English
; Akino, Fujiyoshi; Yamane, Tsuyoshi; ; Kitadate, Kenji; ; Takeuchi, Motoyoshi; Ono, Toshihiko; Kaneko, Yoshihiko
JAERI 1305, 138 Pages, 1987/08
no abstracts in English
; ; ; ; ;
JAERI-M 86-016, 51 Pages, 1986/02
no abstracts in English
