Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
O
接合体の高温曲げ特性佐藤 隆史*; 本橋 嘉信*; 佐久間 隆昭*; 早稲田 一嘉*; 柴田 大受; 石原 正博; 沢 和弘
日本機械学会関東支部茨城講演会(2004)講演論文集(No.040-3), p.55 - 56, 2004/09
将来の高温ガス炉への応用が期待されている超塑性3Y-TZP(3mol%イットリア含有正方晶ジルコニア多結晶体)について、3Y-TZPを接合材としてアルミナを接合させ、その後4点曲げ試験を実施し、接合特性として以下の結論を得た。(1)曲げ温度が接合温度に近づくと残留応力を緩和して曲げ強度が上昇する。(2)高温での接合体の強度は、3Y-TZPの強度及び接合界面の気孔状態に依存する。(3)超塑性3Y-TZPを用いることで、金属材料を用いて接合した場合より優れた強度特性が得られた。
栗原 良一; 西尾 敏; 小西 哲之
Thermal Stresses 2001, p.81 - 84, 2001/00
トカマク型核融合動力炉において、プラズマから高熱流束を受けるブランケット第一壁は、照射損傷などにより亀裂が発生する可能性がある。DREAMのSiC/SiC複合材料製ブランケット第一壁に亀裂を想定して、亀裂周辺の応力状態を調べるため有限要素法解析を行った。その結果、亀裂周辺の応力は圧縮応力状態になるが、亀裂先端のごく近傍では許容応力以上の引張と圧縮の応力集中が発生した。今後、亀裂の安定性及び限界亀裂寸法を正確に評価するために、クリープによる応力緩和等を考慮した破壊力学的評価法の開発が必要である。
Li, Y.; 東 喜三郎*; 長谷川 邦夫
no journal, ,
Flaws due to stress corrosion cracking have been detected in stainless steel or nickel-based alloy dissimilar metal weld joints of piping systems in nuclear power plants. Generally, stainless steel and nickel-based alloy are ductile materials with high toughness, and the failure mode of flawed pipes made of ductile materials is expected to be net-section plastic collapse. Failure bending moment of a ductile pipe containing a circumferential flaw is predicted using the net-section stress approach according to ASME Code Section XI as a limit load criterion. However, in the current code, the failure bending moment can only be adopted for a pipe containing a single circumferential flaw with constant depth, although many flaws detected actually are multiple flaws, and the flaw shapes are generally complicated. In this study, a failure estimation method for pipes containing multiple circumferential flaws with complicated shapes was proposed. Furthermore, failure experiments were performed for 8-inch diameter Schedule 80 stainless steel pipes containing two circular circumferential flaws. The failure bending moments obtained from the experiments were compared with the estimated results. Based on the experimental results, it was concluded that the proposed failure estimation method satisfactorily represents the failure behavior of the pipes and can be applied in engineering application.