Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
2022)Aso, Tomokazu; Ariyoshi, Gen; Muto, Hideki*; Tanaka, Shigeto*
JAEA-Technology 2025-005, 51 Pages, 2025/10
The cryogenic hydrogen system of the J-PARC center is one of the most important pieces equipment, which is a refrigeration system for moderating (cooling) the high energy neutrons generated the spallation neutron source of the Material and Life Science Experimental Facility (MLF) that is used by many users from Japan and abroad. Since the first operation of the MLF for neutron use in 2008, the cryogenic hydrogen system has been continuously operated and maintained, and related technology development has been carried out. This report summarized these activities over the past five years.
Aso, Tomokazu; Tatsumoto, Hideki*; Otsu, Kiichi*; Kawakami, Yoshihiko*; Komori, Shinji*; Muto, Hideki*; Takada, Hiroshi
JAEA-Technology 2019-013, 77 Pages, 2019/09
At Materials and Life Science experimental Facility (MLF) of the Japan Proton Accelerator Research Complex (J-PARC), a 1-MW pulsed spallation neutron source is equipped with a cryogenic hydrogen system which circulates liquid hydrogen (20 K and 1.5 MPa) to convert high energy neutrons generated at a mercury target to cold neutrons at three moderators with removing nuclear heat of 3.8 kW deposited there. The cryogenic system includes an accumulator with a bellows structure in order to absorb pressure fluctuations generated by the nuclear heat deposition in the system. Welded inner bellows of the first accumulator was failured during operation, forcing us to improve the accumulator to have sufficient pressure resistance and longer life-time. We have developed elemental technologies for manufacturing welded bellows of the accumulator by a thick plate with high pressure resistance, succeeding to find optimum welding conditions. We fabricated a prototype bellows block and carried out an endurance test by adding a pressure change of 2 MPa repeatedly. As a result, the prototype bellows was successfully in use exceeding the design life of 10,000 times. Since distortions given during welding and assembling affect functionality and lifetime of the bellows, we set the levelness of each element of the bellows as within 0.1
. The improved accumulator has already been in operation for about 25,000 hours as of January 2019, resulting that the number of strokes reached to 16,000. In July 2018, we demonstrated that the accumulator could suppress the pressure fluctuation generated by the 932 kW beam injection as designed. As current operational beam power is 500 kW, the current cryogenic hydrogen system could be applicable for stable operation at higher power in the future.
Aso, Tomokazu; Teshigawara, Makoto; Hasegawa, Shoichi; Muto, Hideki; Aoyagi, Katsuhiro; Nomura, Kazutaka; Takada, Hiroshi
Journal of Physics; Conference Series, 1021(1), p.012085_1 - 012085_4, 2018/06
Times Cited Count:0 Percentile:0.00(Nuclear Science & Technology)Takada, Hiroshi; Haga, Katsuhiro; Teshigawara, Makoto; Aso, Tomokazu; Meigo, Shinichiro; Kogawa, Hiroyuki; Naoe, Takashi; Wakui, Takashi; Oi, Motoki; Harada, Masahide; et al.
Quantum Beam Science (Internet), 1(2), p.8_1 - 8_26, 2017/09
At the Japan Proton Accelerator Research Complex (J-PARC), a pulsed spallation neutron source provides neutrons with high intensity and narrow pulse width to promote researches on a variety of science in the Materials and life science experimental facility. It was designed to be driven by the proton beam with an energy of 3 GeV, a power of 1 MW at a repetition rate of 25 Hz, that is world's highest power level. A mercury target and three types of liquid para-hydrogen moderators are core components of the spallation neutron source. It is still on the way towards the goal to accomplish the operation with a 1 MW proton beam. In this paper, distinctive features of the target-moderator-reflector system of the pulsed spallation neutron source are reviewed.
Bhattacharya, R.*; Vaghela, H.*; Sarkar, B.*; Patel, P.*; Das, J.*; Srinivasa, M.*; Isono, Takaaki; Kawano, Katsumi
IOP Conference Series; Materials Science and Engineering, 171, p.012058_1 - 012058_8, 2017/03
Tozawa, Kazukiyo*; Kiriyama, Koji*; Mitsui, Takaya; Shiwaku, Hideaki; Harami, Taikan
JAERI-Tech 2004-041, 27 Pages, 2004/03
Liquid-N
-cooled Si crystals replaced water-cooled diamond crystals for the double-crystal monochromator on BL11XU at SPring-8. To use the whole energy from 6 keV to 70 keV, we developed the system of dual symmetric Si geometry, Si(111)/Si(311), which can be switched by a horizontal translation (X) stage perpendicular to the beam axis. The off-line experiment was performed to estimate the degree of the crystal strain, which may arise from the way of assembling in the crystal holder. With MoK
, rocking curves from the crystals were measured for the second crystal of the double-crystal diffractometer of parallel setting. Each of the observed full-width at half maximum (FWHM) was almost constant and identical to the calculated value wherever X-rays hit on the crystal surface. By the use of synchrotron radiation from the undulator the crystals were tested and then the characterization was performed. The observed intensities and rocking curves resulted in that each crystal was good for BL11XU and that the performance of X-ray reflection was improved.
Minehara, Eisuke; Hajima, Ryoichi; Sawamura, Masaru; Nagai, Ryoji; Kikuzawa, Nobuhiro; Nishimori, Nobuyuki
Proceedings of 28th Linear Accelerator Meeting in Japan, p.31 - 32, 2003/08
Current status of the JAERI superconducting RF linac driven free-electron laser has been reported to describe some details of the FEL device and application researches. In the presentation, several progresses and achievements itimized below have been reproted briefly. Firstly a semi-perpetual, non-stop and continous operation of the JAERI cryogenic and refrigeration system is only available in the world for the JAERI superconducting linac-based FEL. Secondly a conceptual design and each vital component of the ERL(energy recovery linac) light souce has recently been developed and progressed quickly as the next-generation light source. Thirdly,large-scaled industrial applications have been briefly reported here.
Kiriyama, Koji*; Shiwaku, Hideaki; Tozawa, Kazukiyo*
JAERI-Tech 2003-061, 21 Pages, 2003/07
Cryogenically cooled monochromator equipped with circulated-liquid-nitrogen cooling system has been developed on JAERI beam-line, BL11XU, at SPring-8. This cooling system has improved the performance of X-ray reflection. The system has difficulty for the operation because of a lack of the manual. So, it is required to establish a systematic guide of the system. Here we report a manual with fruitful know-how to operate the cryogenic cooling system on BL11XU safely and easily. The new manual is wholly tabulated and shows comments, instructions, and valve conditions in all one-step. The operator, by using this manual, can manipulate the system with no misoperation.
Kawano, Katsumi; Hamada, Kazuya; Matsui, Kunihiro; Hara, Eiji*; Kato, Takashi; CS Model Coil Test Group
Teion Kogaku, 36(6), p.381 - 388, 2001/06
no abstracts in English
Kawano, Katsumi; Kato, Takashi; ; Matsui, Kunihiro; Hiyama, Tadao; ; ; ; Otsu, K.*; ; et al.
Proc. of 16th Int. Cryogenic Engineering Conf. /Int. Cryogenic Materials Conf., 0, 4 Pages, 1996/00
no abstracts in English
Kato, Takashi
Heisei-4-Nendo Reito Bukai Nenkan Koenshu, 0, p.25 - 30, 1993/00
no abstracts in English
Kato, Takashi; Tada, Eisuke; Hiyama, Tadao; Kawano, Katsumi; ; ; ; ; Shimamoto, Susumi
Fusion Technology 1990, p.1535 - 1539, 1991/00
no abstracts in English
Okuno, Kenji; Enoeda, Mikio; ; ; Yoshida, Hiroshi; Naruse, Yuji; Anderson, J. L.*; Bartlit, J. R.*; Sherman, R. H.*; R.V.Carlson*; et al.
JAERI-M 90-028, 73 Pages, 1990/02
no abstracts in English
; ;
Fusion Technology, 10, p.462 - 473, 1986/00
no abstracts in English
Kato, Takashi; ; ; Hiyama, Tadao; Kawano, Katsumi;
Transactions of the American Nuclear Society, 52, p.313 - 314, 1986/00
no abstracts in English
JAERI-M 84-160, 105 Pages, 1984/08
no abstracts in English
; Konishi, Satoshi; Naruse, Yuji
Nucl.Technol./Fusion, 3, p.471 - 484, 1983/00
no abstracts in English
Aso, Tomokazu; Teshigawara, Makoto; Ariyoshi, Gen; Haga, Katsuhiro
no journal, ,
Aso, Tomokazu; Teshigawara, Makoto; Hasegawa, Shoichi; Muto, Hideki*; Aoyagi, Katsuhiro*; Takada, Hiroshi
no journal, ,