Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Morita, Yasuji; Kubota, Masumitsu*
JAERI-Review 2005-041, 35 Pages, 2005/09
Research and development on Partitioning in JAERI are reviewed in the present report from the beginning to the development of the 4-Group Partitioning Process and its test with real high-level liquid waste (HLLW). In the 3-Group Partitioning Process established in around 1980, elements in HLLW are separated into 3 groups of transuranium element group, Sr-Cs group and the other element group. The 4-Group Partitioning Process subsequently developed contains the separation of Tc-platinum group metals additionally. The process was tested to demonstrate its performance with real concentrated HLLW. Until then, various separation methods for various elements were studied and selection and optimization of the separation methods were carried out to establish the process. Review of the experience, findings and results is very important and valuable for future study on partitioning. The present report is prepared from this point of view.
; Takahashi, Yoshihisa
Journal of Nuclear Science and Technology, 33(2), p.147 - 151, 1996/02
Times Cited Count:2 Percentile:24.15(Nuclear Science & Technology)no abstracts in English
; ;
Journal of Nuclear Science and Technology, 16(6), p.426 - 433, 1979/00
Times Cited Count:21no abstracts in English
Segawa, Tomoomi; Kawaguchi, Koichi; Ishii, Katsunori; Nagakawa, Genta*; Tamaru, Ayaka*; Fukasawa, Tomonori*; Ishigami, Toru*; Fukui, Kunihiro*
no journal, ,
Microwave heating in combination with an external heating source has been used to improve powder properties by compensating for heat transfer losses. However, the external heating source in the microwave irradiation field may degrade the heating elements. A hybrid heating method has been developed to use composite ceramic jacket prepared by adding carbon nanotube (CNT) to alumina. To evaluate the effect of CNT-containing alumina composite ceramic jacket (CNT jacket), experiments were implemented. In both copper nitrate solution and nickel nitrate solution, the time to reach the maximum temperature was earlier when the CNT jacket was used than when the alumina jacket was used. The temperature of the nickel nitrate solution was kept at the maximum temperature when the CNT jacket was used, while the temperature tended to decrease after reaching to 280
C when the alumina jacket was used. The hybrid heating method using the CNT jacket can obtain metal oxides.