JOPSS - Search Results

Journal Articles

Study of the neutron multiplication effect in an active neutron method

Komeda, Masao; Ozu, Akira; Mori, Takamasa; Nakatsuka, Yoshiaki; Maeda, Makoto; Kureta, Masatoshi; Toh, Yosuke

Journal of Nuclear Science and Technology, 54(11), p.1233 - 1239, 2017/11

https://doi.org/10.1080/00223131.2017.1359118

Times Cited Count：11 Percentile：64.73(Nuclear Science & Technology)

The previous active neutron method cannot remove the influence of the multiplication effect of neutrons produced by second- and subsequent fission reactions, and it might overestimate the amount of nuclear material if an item contains large amounts. In this paper, we discussed the correction method for the neutron multiplication effect on the measured data in the fast neutron direct interrogation (FNDI) method, one of the active neutron methods, supposing that the neutron multiplication effect is caused mainly by third-generation neutrons from the second-fission reactions under the condition that the forth-generation neutrons are much fewer. This paper proposed a correction method for the neutron multiplication effect in the measured data. Moreover we have shown a possibility that this correction method gives rough estimates of the effective neutron multiplication factor and the subcriticality.

Journal Articles

R&D of active neutron NDA techniques for nuclear nonproliferation and nuclear security, 3; Validation of neutron transport code for design of NDA system

Maeda, Makoto; Komeda, Masao; Tobita, Hiroshi; Ozu, Akira; Kureta, Masatoshi; Bogucarska, T.*; Crochemore, J. M.*; Varasano, G.*; Pedersen, B.*

Dai-37-Kai Kaku Busshitsu Kanri Gakkai Nihon Shibu Nenji Taikai Rombunshu (CD-ROM), 7 Pages, 2017/02

JAEA and EC/JRC are carrying out collaborative research to develop NDA techniques that can be utilized for quantification of high radioactive special nuclear materials such as spent fuel and next generation minor actinide fuels. In the research, reliability of neutron transport codes is important because it is utilized for design and development of a demonstration system of next-generation Differential Die-away (DDA) technique in JAEA. In order to evaluate the reliability, actual neutron flux distribution in a sample cavity was examined in PUNITA device using JRC type DDA technique and JAWAS-T device using JAEA type DDA technique, and then the measurement results were compared with the simulation results obtained by the neutron transport codes. The neutron flux distribution in the target matrix was also examined in the PUNITA and compared with the simulation results. We report on the measurement and simulation results of the neutron flux distribution and evaluation results of the reliability of the neutron transport codes.

Journal Articles

Evaluation of neutron flux distribution in the JAEA type and JRC type DDA systems

Maeda, Makoto; Komeda, Masao; Tobita, Hiroshi; Ozu, Akira; Kureta, Masatoshi; Bogucarska, T.*; Crochemore, J. M.*; Varasano, G.*; Pedersen, B.*

Proceedings of INMM 57th Annual Meeting (Internet), 9 Pages, 2016/07

The JAEA and EC/JRC have started collaborative research to develop a technique that can be utilized for quantification of high radioactive special nuclear materials such as next generation minor actinide fuels. In the study of a Differential Die-Away (DDA) technique, which is one of the techniques to be improved in the collaborative research, JRC type and JAEA type DDA techniques are compared. In the JRC type DDA technique, large amount of thermal neutron is generated using D-T neutron generator and graphite moderator to accomplish high detection sensitivity for small amount of fissile material. On the other hand, in JAEA type, relatively hard neutron spectrum and moderation of neutron in the target matrix are utilized to minimize position dependence of detection efficiency. Estimation of the neutron field is important to evaluate the performance of the system in DDA technique. The purpose of this study is to validate simulation results by experimental results and evaluate neutron flux distribution in the system by the simulation and the experiment. In this paper, we present the evaluation results of the neutron flux distributions in PUNITA which utilizes JRC type DDA technique and JAWAS-T which utilizes JAEA type DDA technique obtained by Monte Carlo simulation and activation method.

Journal Articles

Method for detection of separatrix surface using differential double probe

Amemiya, Hiroshi*; Uehara, Kazuya

Japanese Journal of Applied Physics, Part 1, 45(1A), p.247 - 249, 2006/01

https://doi.org/10.1143/JJAP.45.247

Times Cited Count：4 Percentile：16.40(Physics, Applied)

A method for detecting the separatrix surface in the edge plasma in Tokamak is presented. Two sets of double probes whose front surfaces are shifted by a small distance are mounted and the difference of the currents is measured using a differential amplifier. When the separatrix surface reaches the probes, a current increment appears in the differential amplifier, giving a signal of the arrival of the separatrix. Procedures of obtaining plasma parameters including the ion temperature are described.

Journal Articles

Impact of perturbed fission source on the effective multiplication factor in Monte Carlo perturbation calculations

Nagaya, Yasunobu; Mori, Takamasa

Journal of Nuclear Science and Technology, 42(5), p.428 - 441, 2005/05

https://doi.org/10.3327/jnst.42.428

Times Cited Count：73 Percentile：96.63(Nuclear Science & Technology)

A new method to estimate a change in the effective multiplication factor due to the perturbed fission source distribution has been proposed for Monte Carlo perturbation calculations with the correlated sampling and differential operator sampling techniques. The method has been implemented into the MVP code for verification. Simple benchmark problems have been set up for fast and thermal systems and the applicability of the method has been verified with the problems. In consequence, it has been confirmed that the method is very effective to estimate the change. It has been also shown that there are some cases where the perturbed source effect is significant and the change in reactivity cannot be estimated accurately without taking the effect into account. Even in such cases, the new method can estimate the perturbed source effect and the estimation of the change in reactivity has been remarkably improved.

Journal Articles

Solutions of partial differential equations with the CIP-BS method

Utsumi, Takayuki*; Kimura, Hideo

JSME International Journal, Series B, 47(4), p.761 - 767, 2004/11

In this paper, we show that a new numerical method, the Constrained Interpolation Profile - Basis Set (CIP-BS) method, can solve partial differential equations (PDEs) with high accuracy and can be a universal solver by presenting examples for the solutions of typical parabolic, hyperbolic, and elliptic equations. Here, we present the numerical errors caused by this method, and illustrate that the solutions by the CIP-BS $^{2}$ method, in which fifth order polynomials are used to constrain the values and first and second order spatial derivatives, are highly refined compared to those by the CIP-BS $^{1}$ method, in which third order polynomials are used to constrain the values and first order spatial derivatives. The fact that this method can unambiguously solve PDEs with an one-to-one correspondence to analytical requirements is also shown for PDEs including singular functions like the Dirac delta function with Dirichet or Neumann boundary conditions. This method is straightforwardly applicable to PDEs describing complex physical and engineering problems.