Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Nakahira, Masataka; Takeda, Nobukazu; Urata, Kazuhiro*
JAERI-Tech 2004-069, 55 Pages, 2004/12
JAERI-Tech-2004-069.pdf:11.46MB
This report summarizes the study on dynamic behavior of ITER tokamak scaled model according to the parametric analysis of base plate thickness, in order to find a solution to give the sufficient rigidity without affecting the dynamic behavior. For this, modal analyses were performed changing the base plate thickness from the present design of 55mm to 100, 150 and 190 mm. It was found that the thickness of 150mm gives well fitting of 1st natural frequency about 90% of ideal rigid case. Thus, the modification study was performed to find out the adequate plate thickness. Considering the material availability, transportation and weldability, it was found that the 300mm thickness would be a limitation. The analysis result of 300mm thickness case showed 97% fitting of 1st natural frequency to the ideal rigid case. It was however found that the bolt length was too long and it gave additional twisting mode. As a result, it was concluded that the base plate thickness of 150mm or 190mm gives sufficient rigidity for the dynamic behavior of the scaled model.
Onozuka, Masanori*; Takeda, Nobukazu; Nakahira, Masataka; Shimizu, Katsusuke*; Nakamura, Tomomichi*
Fusion Engineering and Design, 69(1-4), p.757 - 762, 2003/09
Times Cited Count：2 Percentile：18.08(Nuclear Science & Technology)The dynamic behavior of the ITER tokamak assembly has been investigated. Three experimental models have been considered to validate the numerical analysis methods for the dynamic events, mainly seismic events. A 1/8-scaled tokamak model, which is based on the 1998 ITER design, is under construction. Non-linear vibration characteristics, such as damping, can only be identified by a full-scale model. Therefore, a full-scale gravity support structure for the coil system has been designed and will be tested. In addition, for the sub-scaled tokamak model, the VV is assumed to be a rigid structure. This assumption is to be verified using a 1/20-scaled model. The above experimental models and their testing conditions have analytically and numerically evaluated. For example, both the static and dynamic spring constants obtained by static analysis and eigen-value analysis, respectively, were evaluated to be in good agreement.
31,1991,Tokai,JAERI; Research Committee on Reactor Physics
JAERI-M 92-054, 181 Pages, 1992/03
no abstracts in English
