Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yasuda, Ryo; Mita, Naoaki; Nishino, Yasuharu; Nakata, Masahito; Nozawa, Yukio; Harada, Katsuya; Kushida, Teruo; Amano, Hidetoshi
Nuclear Technology, 151(3), p.341 - 345, 2005/09
Times Cited Count：0 Percentile：0.00(Nuclear Science & Technology)The Field Emission type Scanning Electron Microscope (FE-SEM), which is one of effective tools for observation of micr-structures, was installed at the Reactor Fuel Examination Facility (RFEF) in JAERI. The FE-SEM is equipped in a large shield vessel with remote handling systems to keep safety of operators and is modified to enable to manipulate high radioactive materials. The Energy Dispersive Spectrometer (EDS) with radiation-shielded collimators has been also equipped on the FE-SEM to determine element compositions of the observed material samples. Characterization tests were carried out using deposited gold film and Zircaloy cladding tubes with hydrides to confirm the machine performance after the modifications. In the results of the tests, high-resolution images without some noises and fogs were obtained with high magnification above 10,000. Those results show that the FE-SEM keeps the high performance after some improvements and modifications for shielding 
-rays and handling radioactive samples.
Yasuda, Ryo; Nishino, Yasuharu; Mita, Naoaki; Nakata, Masahito; Harada, Katsuya; Nozawa, Yukio; Amano, Hidetoshi
JAERI-Tech 2002-081, 34 Pages, 2002/10
JAERI-Tech-2002-081.pdf:11.76MB
Information about the fuel behavior under high burn-up operation is needed to assess the safety of the high burn-up fuels. Microstructures in irradiated fuel pellets and Zircaloy tubes influence on their integrity. The fundamental information about microstructures is necessary to estimate the formation mechanism and change in the properties of the fuels.The Field Emission type Scanning Electron Microscope (FE-SEM) has been hence installed at the Reactor Fuel Examination Facility (RFEF). FE-SEM is designed for the remote handling type to use high radioactive materials and has equipments to keep safety for operators. Charctarization tests were carried out using Zircaloy cladding tubes with oxide films and hydrides to confirm machine performance. In the results of the tests, high-resolution images with a magnification of 30,000 were obtained. Those results show that the apparatus is maintained high performance as well as standard type.
Nemoto, Yoshiyuki; Miwa, Yukio; Kikuchi, Masahiko; Kaji, Yoshiyuki; Tsukada, Takashi; Tsuji, Hirokazu
Journal of Nuclear Science and Technology, 39(9), p.996 - 1001, 2002/09
Times Cited Count：6 Percentile：38.91(Nuclear Science & Technology)Surface morphology of oxidized stainless steel was evaluated using atomic force microscope (AFM) and scanning electron microscope (FE-SEM). Cross-sectional morphology of oxide layer on the specimens was evaluated using FE-SEM after fabrication. Focused ion beam (FIB) technique was applied to fabricate thin film samples of oxide films, which were used for microstructure observation by transmission electron microscope (FE-TEM), and microscopic chemical analysis by energy dispersed X-ray spectrometer (EDS). These preparations and observations were successful, and microstructure and chemical composition of oxide films were evaluated on nanometer scale. Effects of silicon (Si) doping and dissolved oxygen (DO) content in water for oxide layer formation are discussed.
