JOPSS - Search Results

Journal Articles

The Multiaxial creep-fatigue failure mechanism of Mod. 9Cr-1Mo steel under non-proportional loading; Effect of strain energy on failure lives

Ogawa, Fumio*; Nakayama, Yuta*; Hiyoshi, Noritake*; Hashidate, Ryuta; Wakai, Takashi; Ito, Takamoto*

Transactions of the Indian National Academy of Engineering (Internet), 7(2), p.549 - 564, 2022/06

https://doi.org/10.1007/s41403-021-00279-y

The strain energy-based life evaluation method of Mod. 9Cr-1Mo steel under non-proportional multiaxial creep-fatigue loading is proposed. Inelastic strain energy densities were calculated as the areas inside the hysteresis loops. The effect of mean-stress has been experimentally considered and the relationship between inelastic strain energy densities and creep-fatigue lives was investigated. It was found from the investigation of hysteresis loops, the decrease in maximum stress leads to prolonged failure life, while stress relaxation during strain holding causes strength reduction. The correction method of inelastic strain energy density was proposed considering the effect of maximum stress in hysteresis loop and minimum stress during strain holding, and strain energy densities for uniaxial and non-proportional multiaxial loading were obtained. Based on these results, the mechanisms governing creep-fatigue lives under non-proportional multiaxial loading have been discussed.

Journal Articles

Evaluation of multiaxial low cycle creep-fatigue life for Mod.9Cr-1Mo steel under non-proportional loading

Nakayama, Yuta*; Ogawa, Fumio*; Hiyoshi, Noritake*; Hashidate, Ryuta; Wakai, Takashi; Ito, Takamoto*

ISIJ International, 61(8), p.2299 - 2304, 2021/08

https://doi.org/10.2355/isijinternational.ISIJINT-2020-780

Times Cited Count：5 Percentile：28.30(Metallurgy & Metallurgical Engineering)

This study discusses the creep-fatigue strength for Mod.9Cr-1Mo steel at a high temperature under multiaxial loading. A low-cycle fatigue tests in various strain waveforms were performed with a hollow cylindrical specimen. The low cycle fatigue test was conducted under a proportional loading with a fixed axial strain and a non-proportional loading with a 90-degree phase difference between axial and shear strains. The low cycle fatigue tests at different strain rates and the creep-fatigue tests at different holding times were also conducted to discuss the effects of stress relaxation and strain holding on the failure life. In this study, two types of multiaxial creep-fatigue life evaluation methods were proposed: the first method is to calculate the strain range using Manson's universal slope method with considering a non-proportional loading factor and creep damage; the second method is to calculate the fatigue damage by considering the non-proportional loading factor using the linear damage law and to calculate the creep damage from the improved ductility exhaustion law. The accuracy of the evaluation methods is much better than that of the methods used in the evaluation of actual machines such as time fraction rule.

Journal Articles

Fatigue assessment of the ITER TF coil case based on JJ1 fatigue tests

Hamada, Kazuya; Nakajima, Hideo; Takano, Katsutoshi*; Kudo, Yusuke; Tsutsumi, Fumiaki*; Okuno, Kiyoshi; Jong, C.*

Fusion Engineering and Design, 75-79, p.87 - 91, 2005/11

https://doi.org/10.1016/j.fusengdes.2005.06.077

Times Cited Count：10 Percentile：55.66(Nuclear Science & Technology)

no abstracts in English

Journal Articles

Study on creep-fatigue life of irradiated austenitic stainless steel

Ioka, Ikuo; Miwa, Yukio; Tsuji, Hirokazu; Yonekawa, Minoru; Takada, Fumiki; Hoshiya, Taiji

JSME International Journal, Series A, 45(1), p.51 - 56, 2002/01

The low cycle creep-fatigue test with tensile strain hold of the austenitic stainless steel irradiated to 2dpa was carried out at 823K in vacuum. The applicability of creep-fatigue life prediction methods to the irradiated specimen was examined. The fatigue life on the irradiated specimen without tensile strain hold time was reduced by a factor of 2-5 in comparison with the unirradiated specimen. The fraction of intergranular fracture increased with increasing strain hold time. The decline in fatigue life of the irradiated specimen with tensile strain hold was almost equal to that of the unirradiated specimen. For the irradiated specimen, the time fraction damage rule trends to yield unsafe estimated lives and the ductility exhaustion damage rule trends to yield generous results. However, all of data were predicted within a factor of three on life by the linear damage rule.

Journal Articles