Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Nagasumi, Satoru; Hasegawa, Toshinari; Nakagawa, Shigeaki; Kubo, Shinji; Iigaki, Kazuhiko; Shinohara, Masanori; Saikusa, Akio; Nojiri, Naoki; Saito, Kenji; Furusawa, Takayuki; et al.
JAEA-Research 2025-005, 23 Pages, 2025/07
JAEA-Research-2025-005.pdf:2.68MB
A safety demonstration test under abnormal operating conditions using the HTTR (High Temperature Engineering Test Reactor) was conducted to demonstrate safety features of the HTGRs (High Temperature Gas-cooled Reactors). Under a simulation of a control rod shutdown failure, all primary helium gas circulators were intentionally stopped during a steady-state operation at 100% reactor thermal power (30 MW), temporal changes of the reactor power and temperatures around the reactor pressure vessel (RPV) were obtained after the complete loss of forced heat removal from the reactor core. After the event (primary coolant flow stopped), the reactor power quickly decreased due to the negative reactivity feedback associated with the core temperature rise, and then the reactor power spontaneously shifted to a stable state of low power (about 1.2%) even after a recriticality. Heat dissipation from RPV surface to a surrounding vessel cooling system (water-cooled panels) ensured the amount of heat removal required to maintain the reactor temperature constant in the low power state. In this way, the transition from the event occurrence to the stable and safety state, i.e., inherent safety features of HTGRs, were demonstrated in the case of core forced cooling loss without active shutdown operations.
Iguchi, Tadashi; Shibamoto, Yasuteru; Asaka, Hideaki; Nakamura, Hideo
Proceedings of 10th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-10), 16 Pages, 2003/10
Thermal-hydraulic and neutronic dynamics are always interrelated in BWR core. This is called thermal-hydraulic and neutronic (T/N) coupling. Channel stability experiments with T/N coupling under non-nuclear condition are very limited. This is mainly due to the difficulties in the real-time simulation of neutron dynamics and in the fast-response void fraction measurement under high-pressure and temperature conditions. Authors have developed techniques to solve the above difficulties, and have succeeded in experimentally simulating T/N coupling under non-nuclear conditions with the THYNC facility. Using THYNC facility, T/N coupling effect on channel stability was investigated. Experiments were performed under Pressure=2-7MPa, Subcooling=10-40K, and Mass flux=270-660kg/m
s. THYNC results indicated T/N coupling lowered the channel stability threshold. The reduction of channel stability threshold due to T/N coupling was small within 10% at 7MPa in the present THYNC experiment, although the experimental condition was set to be more severe than that supposed in a reactor.
Okamoto, Tsuyoshi*; ; Nishimura, Hideo
JAERI-M 89-059, 18 Pages, 1989/05
no abstracts in English
Kukita, Yutaka; Tasaka, Kanji
Natural Circulation in Single-Phase and Two-Phase Flow, p.77 - 83, 1989/00
no abstracts in English