Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Han, X.*; Shen, X.*; 山本 俊弘*; 中島 健*; 孫 昊旻; 日引 俊*
International Journal of Heat and Mass Transfer, 178, p.121637_1 - 121637_24, 2021/10
被引用回数:18 パーセンタイル:75.76(Thermodynamics)This paper studies the flow regimes, their transitions and the drift-flux correlations in upward gas-liquid two-phase flows in vertical rod bundle flow channels. The flows are classified into 5 flow regimes, namely, bubbly, finely dispersed bubbly, cap-bubbly, churn and annular flows according to their different flow characteristics. Transition criteria between the flow regimes are proposed mechanistically. Those criteria can correctly predict 83% of the existing experimental observation of the flow regime. The drift-flux correlations for the distribution parameter and the drift velocity are also improved. The void fractions predicted by those correlations are compared with the existing experimental data, showing satisfactory agreement with mean relative error of 8%.
竹田 武司; 大津 巌
Mechanical Engineering Journal (Internet), 5(4), p.18-00077_1 - 18-00077_14, 2018/08
We conducted an experiment focusing on nitrogen gas behavior during reflux condensation in PWR with ROSA/LSTF. The primary pressure was lower than 1 MPa under constant core power of 0.7% of volumetric-scaled (1/48) PWR nominal power. Steam generator (SG) secondary-side collapsed liquid level was maintained at certain liquid level above SG U-tube height. Nitrogen gas was injected stepwise into each SG inlet plenum at certain constant amount. The primary pressure and degree of subcooling of SG U-tubes were largely dependent on amount of nitrogen gas accumulated in SG U-tubes. Nitrogen gas accumulated from outlet towards inlet of SG U-tubes. Non-uniform flow behavior was observed among SG U-tubes with nitrogen gas ingress. The RELAP5/MOD3.3 code indicated remaining problems in predictions of the primary pressure and degree of subcooling of SG U-tubes depending on number of nitrogen gas injection. We studied further non-uniform flow behavior through sensitivity analyses.
竹田 武司; 大津 巌
Proceedings of 25th International Conference on Nuclear Engineering (ICONE-25) (CD-ROM), 11 Pages, 2017/07
An experiment focusing on nitrogen gas behavior during reflux cooling in a PWR was performed with the LSTF. The test conditions were made such as the constant core power of 0.7% of the volumetric-scaled PWR nominal power and the primary pressure of lower than 1 MPa. The steam generator (SG) secondary-side collapsed liquid level was maintained at a certain liquid level above the SG tube height. Nitrogen gas was injected stepwise into each SG inlet plenum at a certain constant amount. The primary pressure and the SG U-tube fluid temperatures were greatly dependent on the amount of nitrogen gas accumulated in the SG U-tubes. Non-uniform flow behavior was observed among the SG U-tubes with nitrogen gas ingress. The RELAP5/MOD3.3 code indicated remaining problems in the predictions of the primary pressure and the SG U-tube fluid temperatures after nitrogen gas inflow.
Bakhtiari, M.; 玉井 広史; 河野 康則; Kramer, G. J.*; 諫山 明彦; 仲野 友英; 神谷 健作; 芳野 隆治; 三浦 幸俊; 草間 義紀; et al.
Nuclear Fusion, 45(5), p.318 - 325, 2005/05
被引用回数:46 パーセンタイル:79.12(Physics, Fluids & Plasmas)これまで、われわれは、大量の水素ガスと小量のアルゴンガスを組合せて注入することにより、ディスラプション緩和のためにトカマク放電を急速にまた逃走電子の発生を回避しつつ停止することが可能であることを示している。今回は、アルゴンに加えて他のガス種を用いた同様の実験を実施した。具体的には、アルゴンガス,クリプトンガス,キセノンガスのそれぞれについて水素ガス注入の有る無しのケースをディスラプション緩和効果の観点から比較した。その結果、どのガス種についても、水素ガスと合わせて注入した場合には、水素ガス無しの場合と比べて逃走電子の発生が少なくまた放電停止がより早くなることを観測した。また、中でもクリプトンガス注入が(水素ガスの有る無しにかかわらず)、ダイバータ板への熱負荷低減や逃走電子の発生回避に最も効果的であったことから、放電停止のために用いるガス種の良い候補としてクリプトンが考えられることを見いだした。
五十嵐 慎一; 武藤 俊介*; 田辺 哲朗*; 相原 純; 北條 喜一
Surface & Coatings Technology, 158-159, p.421 - 425, 2002/09
低角度入射電子顕微鏡法を用いて、シリコンブリスタリングのその場観察を行った。重水素照射により形成されるブリスターの大きさ,密度は、電子線照射領域内では領域外より明らかに小さいことがわかった。これは高エネルギー電子線による電子励起により、シリコン不飽和結合の重水素による終端化が抑制されたためである。また、フラックスが高いと、ブリスターが形成されるより前に、フレーキングが起きることも明らかにした。さらに、重水素照射では、注入重水素の最大飛程よりさらに浅いところで、重水素終端された欠陥が形成され、そこで劈開が起こり、ブリスターとなることを明らかにした。
新井 英彦
放射線と産業, 0(69), p.36 - 37, 1996/00
1995年12月17日から同月22日までホノルルで開かれた1995環太平洋国際化学会議に出席して得た印象や新しい研究の動向について解説的にまとめた。同会議には、7000余名の参加者があり、筆者はこの中の環境への放射線利用に関するシンポジウムに参加して研究発表を行った。このシンポジウムでは、新型のコンパクトな電子加速器の発表やポーランド、ウクライナ、中国における排煙の電子線処理プラントの建設計画の発表やダイオキンに汚染された土壌の電子線処理計画など、注目すべき発表が数多くあったので、本報告ではこれらの要点をまとめた。
大貫 晃; 秋本 肇
Int. J. Multiph. Flow, 22(6), p.1143 - 1154, 1996/00
被引用回数:44 パーセンタイル:84.23(Mechanics)大口径垂直管(内径Dh:0.48m、流路長さLとDhの比:約4.2)内の未整定域を含む空気/水二相流の流れの構造を実験的に調べた。未整定域で極端に異なる流れの構造を実現するため2種類の空気注入方法(多孔焼結金属による注入及びノズル注入)を採った。小口径管(Dh≦約0.05m)でスラグ流の現れる条件であっても、空気注入方法によらず流路を占有するスラグ気泡は見られなかった。テスト部下半分での区間差圧分布及び相分布は空気注入方法に依存した特異な分布を示した。しかしながら、テスト部上半分では空気注入方法の効果は小さかった。テスト部上端での区間ボイド率をKataokaの式と比較したところ、ドリフトフラックスモデルの分布パラメータはDhの効果を含めてモデル化すべきこと、及び気泡径分布が空気注入方法に依存することがわかった。