Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Nomoto, Yasunobu; Mizuta, Naoki; Morita, Keisuke; Aoki, Takeshi; Okita, Shoichiro; Ishii, Katsunori; Kurahayashi, Kaoru; Yasuda, Takanori; Tanaka, Masato; Isaka, Kazuyoshi; et al.
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 7 Pages, 2023/05
Kawaguchi, Munemichi; Uno, Masayoshi*
Journal of the Ceramic Society of Japan, 128(10), p.832 - 838, 2020/10
Times Cited Count:2 Percentile:10.23(Materials Science, Ceramics)This study developed phase-field method (PFM) technique in oxide melt system by using a new mobility coefficient (). The crystal growth rates () obtained by the PFM calculation with the constant were comparable to the thermodynamic driving force in normal growth model. The temperature dependence of the was determined from the experimental crystal growth rates and the . Using the determined , the crystal growth rates () in alkali disilicate glasses, LiO-2SiO, NaO-2SiO and KO-2SiO were simulated. The temperature dependence of the was qualitatively and quantitatively so similar that the PFM calculation results demonstrated the validity of the . Especially, the obtained by the PFM calculation appeared the rapid increase just below the thermodynamic melting point () and the steep peak at around -100 K. Additionally, as the temperature decreased, the apparently approached zero ms, which is limited by the representing the interface jump process. Furthermore, we implemented the PFM calculation for the variation of the parameter in the . As the increased from zero to two, the peak of the became steeper and the peak temperature of the shifted to the high temperature side. The parameters and in the increased exponentially and decreased linearly as the atomic number of the alkali metal increased due to the ionic potential, respectively. This calculation revealed that the and in the were close and reasonable for each other.
Chimi, Yasuhiro; Sato, Kenji*; Kasahara, Shigeki; Umehara, Ryuji*; Hanawa, Satoshi
Proceedings of Contribution of Materials Investigations and Operating Experience to Light Water NPPs' Safety, Performance and Reliability (FONTEVRAUD-9) (Internet), 10 Pages, 2018/09
To investigate the influence of Zinc (Zn) injection on primary water stress corrosion cracking (PWSCC) growth behavior, crack growth tests of 10% cold-worked Alloy 600 were performed in simulated primary water environment of pressurized water reactor (PWR) at 320C with a low-concentration (5-10 ppb) Zn injection under dissolved hydrogen (DH) conditions of 5, 30, and 50 cc/kgHO. As a result of the crack growth tests, DH-dependence of crack growth rate (CGR) showed a similar tendency to the predicted CGR based on the CGR data without Zn injection, indicating almost no effect of a low-concentration Zn injection on the crack growth behavior. Moreover, the microstructural analyses of oxide films formed inside the crack and on the specimen surface were conducted, and the intake of Zn in the oxides was detected on the specimen surface, but not detected inside the crack. This result was considered to be the cause of no Zn injection effect on the crack growth behavior.
Chimi, Yasuhiro; Kasahara, Shigeki; Seto, Hitoshi*; Kitsunai, Yuji*; Koshiishi, Masato*; Nishiyama, Yutaka
Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Vol.2, p.1039 - 1054, 2018/00
Times Cited Count:2 Percentile:57.41(Materials Science, Multidisciplinary)In order to understand irradiation-assisted stress corrosion cracking (IASCC) growth behavior, crack growth rate (CGR) tests have been performed in simulated Boiling Water Reactor water conditions at 288C on neutron-irradiated 316L stainless steels (SSs) at 12-14 dpa. After the tests, the microstructures near the crack tip of the specimens are examined with scanning transmission electron microscope (FE-STEM). In comparison with a previous study at 2 dpa, this result shows a less benefit of low electrochemical corrosion potential (ECP) conditions on CGR. A crack tip immersed over 1000 hours was filled with oxides, while almost no oxide film was observed near the crack front in the low-ECP conditions. In addition, a high density of deformation twins and dislocations were found near the fracture surface of the crack front. It is considered that both localized deformation and oxidation are possible dominant factors for the SCC growth in highly irradiated SSs.
Chimi, Yasuhiro; Takamizawa, Hisashi; Kasahara, Shigeki*; Iwata, Keiko; Nishiyama, Yutaka
Nuclear Engineering and Design, 307, p.411 - 417, 2016/10
Times Cited Count:0 Percentile:0.01(Nuclear Science & Technology)To investigate influential parameters for irradiation-assisted stress corrosion cracking (IASCC) growth behavior, we attempt to analyze statistically existing data on the crack growth rate (CGR) in irradiated austenitic stainless steels (SSs) in boiling water reactor (BWR) environments using the Bayesian nonparametric (BNP) method. From the probability distribution of CGR and some input parameters, such as yield stress of irradiated material (), stress intensity factor (), electrochemical corrosion potential (ECP), and fast neutron fluence, the mean CGR is estimated and compared with the measured CGR. The analytical results show good reproducibility of the measured CGR. The results also indicate the possible neutron fluence effects on CGR in high CGR region (i.e., high neutron fluence condition) by radiation-induced segregation (RIS), localized deformation, and/or other mechanisms than radiation hardening.
Functional Materials Laboratory I
JAERI-Conf 2002-003, 225 Pages, 2002/03
This Takasaki symposium was held annually for radiation processing of natural polymers through research cooperation among Asian countries. The symposium includes the presentations of research outcomes on radiation processing of starches, silk proteins and marine carbohydrates. In starch and cellulose researches, radiation crosslinking of biodegradable polysaccharides was achieved by modifying it to be water-soluble paste. In silk protein researches, pulverization and water-solubilization of the irradiated silk proteins were reported. In marine carbohydrate researches, it was reported that radiation-degraded chitosan and alginate showed promotion effects for plant growth and enhancement of antibacterial properties. In addition, estimation of economic scale of radiation application in Japan and U.S. were introduced. Outcomes of this symposium should contribute the progress in radiation applications in south Asian and Japan. We had the 63 participants consisted of 16 foreign researchers and 60 from domestic organizations. This proceeding compiles the invited and contributed papers.
; Nagashima, Keisuke; Ushigusa, Kenkichi; Kikuchi, Mitsuru
Fusion Engineering and Design, 38(4), p.417 - 428, 1998/00
Times Cited Count:4 Percentile:38.66(Nuclear Science & Technology)no abstracts in English
Neyatani, Yuzuru; Kamada, Yutaka; Ozeki, Takahisa; Ishida, Shinichi
Plasma Physics and Controlled Fusion, 37(7), p.741 - 753, 1995/07
Times Cited Count:9 Percentile:41.21(Physics, Fluids & Plasmas)no abstracts in English
Neyatani, Yuzuru; ; Ozeki, Takahisa; Ishida, Shinichi
Proc. of the 20th EPS Conf. on Controlled Fusion and Plasma Physics,Vol. 17C,Part I, p.I-215 - I-218, 1993/00
no abstracts in English
; ; ;
Nihon Kikai Gakkai Rombunshu, A, 52(477), p.1228 - 1231, 1986/00
no abstracts in English
; Nakajima, Hajime; ; ; Kondo, Tatsuo
Corrosion Fatigue; Mechanics, Metallurgy, Electrochemistry and Engineering, p.256 - 286, 1983/00
no abstracts in English
; ; Shindo, Masami; ; ; ; ; ; ; ; et al.
JAERI-M 82-062, 23 Pages, 1982/06
no abstracts in English
; Nakajima, Hajime; Kondo, Tatsuo;
Zairyo, 31(346), p.703 - 709, 1982/00
no abstracts in English
; ; ; ; ; ; ;
JAERI-M 9854, 20 Pages, 1981/12
no abstracts in English
Ueda, Shuzo; ;
JAERI-M 9647, 22 Pages, 1981/08
no abstracts in English
; ; ;
Journal of Nuclear Science and Technology, 12(8), p.491 - 501, 1975/08
Times Cited Count:0no abstracts in English
Chimi, Yasuhiro; Kasahara, Shigeki; Hata, Kuniki; Nishiyama, Yutaka; Seto, Hitoshi*; Chatani, Kazuhiro*; Kitsunai, Yuji*; Koshiishi, Masato*
no journal, ,
In order to investigate effects of environmental mitigation and water radiolysis caused by -rays from radioactive material on irradiation-assisted stress corrosion cracking (IASCC) growth behavior for highly irradiated material, crack growth tests in simulated BWR water conditions (at 563 K) are performed. The specimens made of 316L stainless steels are irradiated with neutrons up to 12 dpa in the Japan Materials Testing Reactor (JMTR). One of the specimens is annealed at 973 K for 1 hour to show almost recovered mechanical and micro-chemical properties corresponding to the unirradiated material. For low electrochemical corrosion potential (ECP) condition, the crack growth rate (CGR) is suppressed by about one order of magnitude in high stress intensity factor (K) condition. This result indicates that environmental mitigation for crack growth can be found even under severe conditions on material and stress factors. The effects of water radiolysis on the CGRs are discussed.
Chimi, Yasuhiro; Kasahara, Shigeki*; Nishiyama, Yutaka; Seto, Hitoshi*; Chatani, Kazuhiro*; Kitsunai, Yuji*; Koshiishi, Masato*
no journal, ,
In order to understand irradiation-assisted stress corrosion cracking (IASCC) growth behavior, crack growth tests in simulated BWR water conditions (at 563 K) were performed using neutron-irradiated specimens made of 316L stainless steels, and the oxide film properties and locally deformed structures near the crack tip have been investigated by transmission electron microscopy (TEM). When electrochemical corrosion potential (ECP) of the materials was lowered by deaeration and hydrogen injection into feed water, apparent suppression of oxidation inside the cracks was observed as well as suppression of the crack growth rate (CGR). In the presentation, the TEM results of the locally deformed structures along the cracks are also reported, and the relation among the CGR, oxide film properties, and locally deformed structures is discussed.
Chimi, Yasuhiro; Kasahara, Shigeki; Nishiyama, Yutaka; Seto, Hitoshi*; Kitsunai, Yuji*; Koshiishi, Masato*
no journal, ,
In order to understand irradiation-assisted stress corrosion cracking (IASCC) growth behavior, crack growth tests using compact tension (CT) specimens made of neutron-irradiated 316L stainless steels (SSs) were performed in simulated BWR environments (at 288C). Moreover, microstructures of deformed areas were observed by transmission electron microscope (TEM) after straining tensile specimens made of neutron-irradiated 316L SSs. As a result, for lower neutron dose than 1.9 dpa, the crack growth rates (CGRs) show effective environmental mitigation and the deformed structures show tangling of dislocations. On the other hand, for higher neutron dose than 2.7 dpa, the CGRs show small environmental mitigation and the deformed structures consist mainly of dislocation channels. From the relationship between CGRs and deformed structures, mechanisms on IASCC growth will be discussed.
Chimi, Yasuhiro; Sato, Kenji*; Kasahara, Shigeki; Umehara, Ryuji*; Hata, Kuniki; Hanawa, Satoshi; Nishiyama, Yutaka
no journal, ,
To investigate the influence of Zinc (Zn) injection on primary water stress corrosion cracking (PWSCC) growth behavior, crack growth tests of 10% cold-worked Alloy 600 in simulated primary water environment of pressurized water reactor (PWR) at 320C and 360C, with and without Zn injection, under dissolved hydrogen (DH) conditions of 5, 30, and 50 cc/kgHO. As a result of the crack growth tests at 360C, it is implied that Zn injection suppresses the oxidation inside the crack and the crack growth rate (CGR). From the crack growth tests at 320C with Zn injection, DH-dependence of CGR showed a similar tendency to the predicted CGR based on the CGR data without Zn injection. Obvious influence of Zn injection on DH-dependence of CGR at 320C was not observed in the present study.